Show us an accessory we’ve never seen before! MFZ Challenge thread.

[hemiarch]

Ok. I want one of those super bad. Is it pretty solidly clipped on there?
Willing to pay anyone who can produce one. Pretty pretty please. With a cherry on top. And sprinkles.

Something I've always wanted but it didn't exist, so I made it myself. A food tray that latches on over the phone charger area https://makerworld.com/en/models/1783579-cybertruck-food-tray

that is the cats pajamas @drewm

Sponsored

 

[Hookalakupua]

I use this to mount GoPros and Insta 360 cameras.
https://ourcyberweekend.com/product...e7YMiDGUCiTOSOsEWDxsVyHY5y2vQV7QLoiGcOPxoCag8

 

[hemiarch]

So what do you mount the go pro for? To film off-roading?

 

[drewm]

Ok. I want one of those super bad. Is it pretty solidly clipped on there?
Willing to pay anyone who can produce one. Pretty pretty please. With a cherry on top. And sprinkles.

Yup it's clipped on pretty good, there's a photo of it with 3 cans of soda hanging over the front that's not supported by anything. It clips in between the phone charger and cupholder. Takes about 2lbs of pull to unclip it. Only slight thing is the jury is still out if it will slightly mar the plastic in the rear of the phone area due to the way it clips on there. I wanted to see how mine does.

I'm also debating making the edge lip taller to handle heavier braking if items were to slide quickly.

 

[Hookalakupua]

So what do you mount the go pro for? To film off-roading?

Yeah, it gives us some creative environmental interactions and lets us capture content at a variety of unique angles.

Also use it when I’m at our open range running 3 gun scenarios as I just hit record and let it go. It’s strong enough to hold my DSR and I’m working on building a larger platform to attach to it.

 

[resellpanda88]

Someone needs to make a wireless charging pad to place on top of the existing charging pad so the phones actually charge. Anyone have a solution? I had a 2024 CT and now a 2025 CT and they both dont charge well.

 

[hemiarch]

Yup it's clipped on pretty good, there's a photo of it with 3 cans of soda hanging over the front that's not supported by anything. It clips in between the phone charger and cupholder. Takes about 2lbs of pull to unclip it. Only slight thing is the jury is still out if it will slightly mar the plastic in the rear of the phone area due to the way it clips on there. I wanted to see how mine does.

I'm also debating making the edge lip taller to handle heavier braking if items were to slide quickly.

Seriosuly though…I’ll gladly be your first customer if and when you decide you want to share it

 

[drewm]

Seriosuly though…I’ll gladly be your first customer if and when you decide you want to share it

I also had a few ideas about building in a modular docking system to add bag hooks to the underside where it overhangs so there's bag hooks for the open space below, and making the latches modular in case one gets broken they would be super easy to replace. Also I could print the latches in a printer orientation that's stronger after this work. Let me finish up that work and I might decide to ship them.

Anyone can print from that link I sent though.

 

[hemiarch]

I also had a few ideas about building in a modular docking system to add bag hooks to the underside where it overhangs so there's bag hooks for the open space below, and making the latches modular in case one gets broken they would be super easy to replace. Also I could print the latches in a printer orientation that's stronger after this work. Let me finish up that work and I might decide to ship them.

Anyone can print from that link I sent though.

awesome. Have you considered sticking a
ferrous surface to it so you can use strong magnets on the top and or bottom for additional accessories/hooks/dividers/containers/ lights and that sort of thing? It would make the thing pretty modular and customizable.

 

[tbuck]

Someone needs to make a wireless charging pad to place on top of the existing charging pad so the phones actually charge. Anyone have a solution? I had a 2024 CT and now a 2025 CT and they both dont charge well.

Tesla has a replacement for the phone charger issue. It was detailed in this thread:

https://www.cybertruckownersclub.co...reless-charger-has-a-built-in-heatsink.44192/

 

[devdrone6]

This works for me, I got it at a conference for free, it is not a fast charger but you can get one like it. I just have it stuck on with a command velcro strip.

Someone needs to make a wireless charging pad to place on top of the existing charging pad so the phones actually charge. Anyone have a solution? I had a 2024 CT and now a 2025 CT and they both dont charge well.

 

[devdrone6]

Tesla has a replacement for the phone charger issue. It was detailed in this thread:

https://www.cybertruckownersclub.co...reless-charger-has-a-built-in-heatsink.44192/

Mine was changed, still same issue.

 

[devdrone6]

How about a taller storage bin for the doors:

This is a remix of a door trash container that I think someone on this forum made, I just chopped it and added fuzzy skin when printing. Mirrored for the passenger door as well - with fuzzy skin texture it snaps into the door with nothing needed to hold them.

Here is the link:
https://www.printables.com/model/1355601-cybertruck-door-storage

 

[resellpanda88]

Tesla has a replacement for the phone charger issue. It was detailed in this thread:

https://www.cybertruckownersclub.co...reless-charger-has-a-built-in-heatsink.44192/

I had a 2024 and now a 2025. The charging works but it's so slow that I run out of battery and need to charge my phone outside of the vehicle before I can get back in if I forget my key card.

 

[resellpanda88]

This works for me, I got it at a conference for free, it is not a fast charger but you can get one like it. I just have it stuck on with a command velcro strip.

Thanks! I'm going to look into this. I hope I can find one that I can retro fit into that space that would charge two phones as I always have at least two phones with me.

Sponsored