Official Announcement | Cybertruck Screen Swivel Mount V2 Launch & Giveaway Event (Tesstudio)

[Tesstudio]

Yea I like it and think it’s worth it. Mine fits a little better than other but I may slip a washer in there to raise it a little bit off the connector though. Here are some more pictures

If you need help with installation issues, you can contact our after-sales customer service

Sponsored

 

[hemiarch]

The aftersales service team wants me to grind/shave the metal mount to make the screen connector fit.

I didn’t buy this to make hard modifications to make it fit. That is not my job to do. That is an issue the product engineer needs to fix for a redesign of the product.

Seriously?

 

[atk0506]

I just added a washer to the left side to give the cable a little wiggle room. It’s not much but better than nothing. They definitely need to redesign this.

What year model do you have and which variant Cybertruck?

 

[atk0506]

On the bottom of my other post I mentioned this, unfortunately I didn't take a pic of it. I forgot and had mounted the screen back on at that point. I had to remove about 2mm of plastic from the shell (on the top side of where the bracket goes) because when I added the washer it raised it up and when I would tighten down the bolts it would pop the plastic shell off because it was hitting so I had to make clearance for that too. if you do it bench top you'll see where its hitting and where to cut. I'd rather sacrifice metal and plastic from the swivel kit any day over damaging the screen.

What year model do you have and which variant of the cybertruck?

 

[hemiarch]

Dead serious.

Personally, I’d want my money back if they told me I needed to “grind” around arguably the most important connector in the car.
please let me know when your product is actually ready for sale.

 

[dpoll995]

What year model do you have and which variant Cybertruck?

2025 AWD build date Feb 2025

 

[That Beast Mode]

What year model do you have and which variant of the cybertruck?

I have a late 2024 FS beast. I was looking at the back of the screen on the pics you and someone else posted w the new mount and comparing it to my pics to see if there was some sort of difference in the mounts or circuit board. While they look a little different, nothing jumped out at me to say ah ha..

 

[That Beast Mode]

The aftersales service team wants me to grind/shave the metal mount to make the screen connector fit.

I didn’t buy this to make hard modifications to make it fit. That is not my job to do. That is an issue the product engineer needs to fix for a redesign of the product.

Yikes.. so my hack job is the "official" fix I guess. Thats not comforting.

 

[JCERRN]

Yikes.. so my hack job is the "official" fix I guess. Thats not comforting.

Oh no no no. Engineering needs to do THEIR job and solve the actual design problem. They need to stop selling the defective, incompatible part and redesign it correctly. That is- if it actually was designed by their engineer and not some remote “overseas” .LLC.
Unfortunately they took a chance on offering a product that they likely only chose to sell, less likely that they actually designed and produced risking their own name and reputation…. Now they are dealing with the aftermath of that.

companies that do the work, that check their math to the best of their ability- still have problems sometimes, but its less likely- AND if there is a problem they can jump in, redesign, and redistribute, not unlike Tesla.
Other companies (like simple importers/distributers) are left holding the stick by the MFG who already got their money and don't care about the end user-
Just my 2 cents on why i wont install products like this one on my very expensive vehicle. Especially products that are for critical vehicle components like the screen.

 

[JUSTICEQD]

Dear Cybertruck Owners,

As an innovation leader in Cybertruck accessories, Tesstudio® is thrilled to announce the global release of the Cybertruck Screen Swivel Mount V2. This upgraded model preserves the original screen height while delivering unprecedented viewing angle adjustment and enhanced stability.

Key Upgrades of V2 Version

1. Original Height, Ultimate Control
Unlike competitors that lower the screen, V2 features a patented design enabling 40° horizontal swivel + 20° vertical tilt without altering the factory height, ensuring seamless integration with Cybertruck’s minimalist interior.

2. Military-Grade Stability for Off-Road Adventures
Constructed with aircraft-grade aluminum and dual-axis damping, this mount has been tested in desert terrain, providing rock-solid stability even on the roughest roads.

3. Tool-Free Installation in 3 Minutes
Plug-and-play modular design requires no drilling or modifications, ensuring zero damage to your vehicle.

Comment & Win: 1 Free Mount Every 10 Comments!

To celebrate the launch, we’re hosting a limited-time giveaway:
How to Enter: Leave a comment sharing your Cybertruck screen usage pain points or creative scenarios.
Rules: Every 10 valid comments unlock a random draw for 1 lucky winner to receive a free V2 mount (valued at ¥XXX).
Duration: August 30 – September 15, 2025 (UTC+9).
Winners Announced: Every Friday on Tesstudio® forums and social media.

Note: Event subject to Japanese laws. Winners must provide valid shipping details.

Act Now for the Best Screen Experience

Visit the product page to experience Tesstudio® V2:
https://www.tesstudio.com/products/cybertruck-screen-swivel-tilt-mount-rotating-holder-tesstudio®?_pos=2&_sid=d7807eb34&_ss=r&variant=51628763513121


Share & Earn Extra Entries
Forward this post to 3 Cybertruck owners and tag them in the comments for additional chances to win!

Join the conversation and elevate your Cybertruck’s smart interaction experience with us!

Tesstudio® Official Team
August 30, 2025

3. Tool-Free Installation in 3 Minutes
Plug-and-play modular design requires no drilling or modifications, ensuring zero damage to your vehicle.

"Tool-Free"

Also...tools not that I expected it to be actually Tool-Free. Though maybe they meant free tools and it was mistranslated

Will see how accurate 3 mins is on my FSCB

 

[Coolhandz]

3. Tool-Free Installation in 3 Minutes
Plug-and-play modular design requires no drilling or modifications, ensuring zero damage to your vehicle.

"Tool-Free"

Also...tools not that I expected it to be actually Tool-Free. Though maybe they meant free tools and it was mistranslated

Will see how accurate 3 mins is on my FSCB

Well, it's 10 minutes later........

 

[That Beast Mode]

Oh no no no. Engineering needs to do THEIR job and solve the actual design problem. They need to stop selling the defective, incompatible part and redesign it correctly. That is- if it actually was designed by their engineer and not some remote “overseas” .LLC.
Unfortunately they took a chance on offering a product that they likely only chose to sell, less likely that they actually designed and produced risking their own name and reputation…. Now they are dealing with the aftermath of that.

companies that do the work, that check their math to the best of their ability- still have problems sometimes, but its less likely- AND if there is a problem they can jump in, redesign, and redistribute, not unlike Tesla.
Other companies (like simple importers/distributers) are left holding the stick by the MFG who already got their money and don't care about the end user-
Just my 2 cents on why i wont install products like this one on my very expensive vehicle. Especially products that are for critical vehicle components like the screen.

Im surprised they redesigned the bracket and didnt address this actually. Seems like a pretty simple fix. Id assume that the bracket is either milled or laser cut, just design and mill a relief cutout for the cable, same way I did just not sloppy with a dremel. Oh they can also send the royalty check directly to my account.

 

[That Beast Mode]

Well, it's 10 minutes later........

Be patient, maybe he got metal shrapnel in his eye from grinding on his damage and tool free install that requires no drilling or modifications.

 

[NiceCybertruck]

I tried to open the website on my iPhone, but it keeps crashing.

 

[eser50]

Im surprised they redesigned the bracket and didnt address this actually. Seems like a pretty simple fix. Id assume that the bracket is either milled or laser cut, just design and mill a relief cutout for the cable, same way I did just not sloppy with a dremel. Oh they can also send the royalty check directly to my account.

lol no way this is milled or laser cut, that would cost money!
These are cast, you can see some of the flashing on the images of the bracket up close. Cheapest way of making these parts.

I'm gonna wait until this is redesigned to v3 or they drop the price significantly to make up for the fact that I will have to modify the product myself to make it work.

Sponsored