Recent content by Cyber_Punk_SFL

The Carbon Fiber ones work perfect, 6 months in south florida heat through the summer and not a single problem, no warping, still look perfect like the day I printed them.

Open the side of the truck, between the doors where the camera is. That panel carefully pops out and you will be able to route from the roof liner into that side panel then up to the roof. All wires hidden and clean install.

Not that I know of, you can use the built in sleep function, but the problem is it won't auto wake up since the car itself doesn't turn off, so it therefore also doesn't turn on which would trigger the mirror to wake again. I just leave it on, it's really not that much power draw but if someone...

Just printed new versions in Carbon Fiber pa6-CF. Let’s see how they hold up in the Florida spring sun.

i have them on the core wheels. No rubbing that I’m aware of but I’m getting some creaking in the suspension that Tesla service is blaming the spacers and won’t investigate it until i remove them. Anyone else experience creaking noises?

Checking in for an update, were you able to finish your modifications? I need to reprint mine, they are warped really bad. Here they are removed and sitting on my table.

Looks good, i wanted to let you know, there's a way to hide that wire if you go through the B pillar and pop out up top through the gromet for the lightbar wiring. Much cleaner look.

What was the cost with shipping?

No doubt, I respect your opinion that this is certainly not the best or recommended location to store a gun for quick access in a real life situation. It is just one of many locations that are possible and for many it is just a show piece. It also is not necessarily a bad location to store it...

Yep, the Cybertruck and the Model 3 fit just fine.

The sound has gotten worse for me, it's so bad. I just don't think it is supposed to happen. I've owned 3 other Tesla's and they don't do that. I'm going to mention it again on my next service appointment.

Would you mind sharing your adjustments? I need to reprint these. I printed them in PETG as suggested, but let me tell you that won't work in the heat. I'm in south florida and it's out "winter" and they only lasted two months. They are both kind of warped from the sun already, one is worse than...

Got mine a week ago and love that thing. I just wrote up a review about it since there were none and this thing deserves a shout out. https://www.cybertruckownersclub.com/forum/threads/q-mats-cybertruck-glovebox-gun-mat-review.37321/

I recently received my Q Mats Cybertruck Gun Mat, a custom made pistol tray designed specifically for your Cybertruck glovebox. I was so impressed with the design, quality, and utility that I offered to write up a review, which is something I normally don’t do. I’m very opinionated which if you...

One more issue I found specifically with the Hansshow mirror in conjunction with a modern radar detector such as the Uniden R8 installed directly under the mirror/GPS unit. When you have this Mirror installed (even without a radar detector), you have to be EXTRA careful when routing the wires...