CYBERBRITE Forum Review / Door Jam Application + Exoskeleton Application With Pics

[CYBERBRITE1]

https://cyberbrite1.com/products/cyberbrite-solution

Another pair of quick real-world tests from forum member MangoTheSpitz in the main CyberBrite thread.
First, a simple single-pass test on the front driver side door. Then, after seeing the results, he went ahead and applied it to the whole truck.
No before photos in either case — he suggests comparing to your own Cybertruck for reference. Photos are straight from an iPhone 17 Pro Max with no filters.
Huge thanks to MangoTheSpitz for sharing these honest tests!

Full original posts with all photos and context are in the CyberBrite thread here (page 4): https://www.cybertruckownersclub.co...reduced-introduction-price-23-95.55767/page-4

Quick Door Test:

"This isn't a review, just a quick test. I forgot to snap any before pictures, you can use your car as a reference. I did a single pass and left it on for about an hour, wiped it off with a damp cloth followed by a microfiber, front driver side door, you be the judge."

Full Truck Application (follow-up):

"After the door jam experiment, I went ahead and applied the whole car. Again, no before pictures, you can compare with your car for reference. I took it to a full brushed auto car wash the night before, applied two coats in the morning, returned to the auto car wash and towel dried it on the spot. I had to touch up on 2 small area when I got home which I may have missed during initial application. See for yourself, photos are straight from an iPhone 17 ProMax, no filters."

Sponsored

 

[84Apollo3]

This looks amazing! Nice work. I have an order of Cyberbrite and am looking forward to trying it.

 

[REM]

STELLAR!

 

[hemiarch]

Ok. I’m convinced. My truck is wrapped but the door jams could use a clean.
Going to order a bottle. I imagine one will be enough to do the door jams and under the frunk lid? Do I need to be super careful about not touching the PPF edges and protect with painters tape or similar? Is there any discount code for forum members or anything like that?

 

[bentoncalder]

Any update on shipping to Canada? would love to buy this product

 

[CYBERBRITE1]

Ok. I’m convinced. My truck is wrapped but the door jams could use a clean.
Going to order a bottle. I imagine one will be enough to do the door jams and under the frunk lid? Do I need to be super careful about not touching the PPF edges and protect with painters tape or similar? Is there any discount code for forum members or anything like that?

Hi. I really like the color of your truck, though I’m a stainless guy. As far as the PPD, I have not tested it specifically on PPF. I don’t know if they are all the same plastic. My experience with the product is that it is safe on plastic. I will buy a piece and test it to confirm. If it were my truck, knowing what I know, I wouldn’t worry about the PPF.
Gary

 

[CYBERBRITE1]

Any update on shipping to Canada? would love to buy this product

Hi. Sorry but the regulatory requirements are daunting for shipping CYBERBRITE to Canada. You might consider, If you have contacts in the US to order and transfer to you.
Gary

Sponsored