Search results

  1. Is the Austin TX water used in the windhield wiper fluild mixuture of hard water?

    I get a lot of dried mineral deposits when spraying the winshield with the orig. CT wiper fluid. I will try to flush with some distilled water and try again.
  2. Tonneau buttons don't work but they work!

    Help! This is strange one. It is very hot outside and my Tonneau buttons won't work. However, if I use my Iphone I can open the tailgate, etc. What's strange is that when the tailgate is open (after using the app) when I push the tailgate button the light inside goes on and off, so the...
  3. Clean Cybertruck Starlink Setup (For Gen2 and Gen3 Dish)

    I am attaching some pictures of my Cybertruck Starlink GEN3 setup (GEN2 works as well, please read below). The idea behind this setup was to get rid of the bulky Starlink WIFI router, the PSU and the 110V setup. I used the Cybertruck's 48VDC lightbar accessory port: The accessory port has 3...
  4. Tire experts: Are the CT tires good for gravel roads?

    I dove my Model Y to Prudhoe Bay and back using standard 18" tires and during the trip I lost a tire by driving almost ~1,000 miles on Dalton HWY. Basically 60% gravel+potholes, 40% asphalt road I would like to do a similar trip on Dempster HWY, this time with Cybertruck. Are the Cybertruck...
  5. How to reset the Auxiliary 48V port?

    My 48V Aux port stopped providing power. I checked the service manual and there is a 'reset' option but in my Cybertruck doesn't show up. Am I doing something wrong here? There is no "Outlets under Controls" and there is no Reset under Outlets & Mods. Help!
  6. How to hard reset a Cybertruck?

    I lost power to my Auxiliar lightbar outlet, I probably tripped an e-fuse or something. What is the procedure to 'hard reset' the Cybertruck in the hope that the fault will be cleared? Holding down both buttons reboots but does not fix the issue. Thanks.
  7. Adehshive showing in the door buttons? [FIXED]

    That's strange. I just noticed it today. The other 3 buttons are perfect (100% black). Black mask paint being dissolved by the adhesive? [SOLVED!] -- it was a peel-off protective film -- needs to be removed.
  8. Can I drill into the carpet? (1 1/2 inch screws)

    I need to secure a power amplifier (RF amplifier) and other electronics under the rear seats, can I do so using some 1 1/2" self tapping screws? I probed the carpet with a needle and it seems to go in, there is some sort of semi-soft material under (foam?). From the pictures I see, there is...
  9. Interior lights are weaker than an Iphone flashlight

    I worked at night on my cybertruck installing things, I noticed that the interior lights are weaker than an Iphone flashlight. You drop something on the floor, good luck finding it at night. LED lights are cheap, I wonder why CT doesn't have stronger interior lighting, is this a safety issue...
  10. HF, VHF/UHF antenna (for HAM radio) install on my Cybertruck, works really well! 📶

    With just 1 watt I was able to reach Japan, China, Russia, Australia, Morocco, Spain and Denmark! Cybetruck makes the perfect ground plane for an antenna! Previous experiences with Model Y were not so good. Cybertruck is def. the quietest electric vehicle, RFI-wise. I managed to install an HF...
  11. Modulated whining sound

    Owned the S, X, 3 and Y. When driving my CT around 30-50mph I hear a faint but distinct whining sound that seems to have a certain beat frequency change that is in tune with speed (higher speed, faster beats). It is not a constant whine that slowly goes up in frequency with speed (this is normal...
  12. White trims on Cybertruck - material not properly stretched?

    I like the white trim but noticed that the white material is not properly stretched, is there a way to fix this? I see a lot of shadows caused by imperfections, sorry my OCD level is like a 8-9.
  13. Cybertruck is inductive charging ready! Battery connector harness spotted in Service Manual

    See Cybertruck Service Manual, Item #31 Yellow for HV, Looks like ~10kW header, 80-200kHz If you remember, Tesla previously teased an inductive charging pad, and Franz confirms in the Jay Leno Cybertruck video that Tesla is working on inductive charging pad...
  14. Is this acceptable?

    After making full payment, I got my VIN some 10 days ago. I went to the Tesla delivery center to ask for status, they were able to locate my Cybertruck (using VIN which is 32xx), the vehicle is 20 miles away from my delivery location, in San Jose, CA.. The sales representative told me that will...
  15. Next gen Cybertruck Battery pack for Dual Motor Cybertruck?

    I know it is super early to talk about this but will the future Cybertruck battery pack yield more range, less weight or lower price? From what I know, higher densitiy batteries usually cost a little more to manufacture.
  16. When you ordered your CT back in Nov 2019....

    When I placed my order, back in 2019, 30-45 seconds after the URL unveil, I had to enter my information by hand and I was not logged into my Tesla account. A few days later my CT was added to my account. MY RN number is 112754xxx Was I supposed to be logged into my Tesla account at ordering...
  17. Dear Cybertruck owners and future 10K owners such as myself:

    -Expect software annoyances and feature unavailability. Tesla Model 3 owner, 2017, VIN 2K. -Because of a different network and Medium Voltage architecture, expect more problems, some can be fixed with software, some not. -The 1-10K Cybertrucks will have most problems followed by software and...
  18. Removing everything plastic from a Cybertruck: Hidden tailgate accessory space?

    This video is interesting, is so quick, I had to stop the frame several times to understand the parts. Looks like it is super-easy to repair and allows all kinds of electrical and mechanical mods, everything is nicely exposed... I wonder what is the function of that rectangular void in the...
  19. How to route an antenna cable?

    Any suggestions on how I can run a thin coax from inside the cabin to the outside for VHF/UHF/HF antennas? I am thinking of using the Light Bar Accessory port and have the antennas mounted on roof rack rails (provided that the rails are electrically connected to the chassis) I still prefer...


Top