Search results

Interesting. Same error here. An update: My Cybertruck is very close to my bedroom (8-10ft) and the problem started when I updarted from Iphone14->16. I think it has to do with weak BLE "long distance" connections. I think it can be fixed with software -- the Cybertruck BLE receivers are too...

I have a Tesla Y and a Cybertruck. My Iphone app keeps asking me to setup phone key. Sitting outside the truck I am able to setup my phone key and then enter the vehicle but after a few hours it 'forgets' again, asking to setup phone key. Same with my wife's phone. Model Y has no problems. I...

I get a lot of dried mineral deposits when spraying the winshield with the orig. CT wiper fluid. I will try to flush with some distilled water and try again.

Thanks! That was it! I turned it on by accident!

Help! This is strange one. It is very hot outside and my Tonneau buttons won't work. However, if I use my Iphone I can open the tailgate, etc. What's strange is that when the tailgate is open (after using the app) when I push the tailgate button the light inside goes on and off, so the...

After driving Cybertruck for 2 months I switched to my Model Y and felt so small, esp the windshield gave me a claustrophobic feeling. The steering felt dated. I used to think Model Y was a spacious, super-cool vehicle, not anymore!. I also have a Toyota Tacoma truck, again, the small windshield...

No! It doesn't work. I bought this very adapter, the nose is not long enough. I gave it a 1 star review for the Cybertruck compatibility missinformation.

It is....

P.S. I have not tested the setup at HWY speed. Tips for mounting using suction cups: 1. clean the surface 2. do not mount when cold outside. 3. Use a water spray bottle to wet the surface

I posted the Starlink Setup here and added some comments for the GEN2: https://www.cybertruckownersclub.com/forum/threads/clean-cybertruck-starlink-setup-for-gen2-and-gen3.17128/

I am attaching some pictures of my Cybertruck Starlink GEN3 setup (GEN2 works as well, please read below). The idea behind this setup was to get rid of the bulky Starlink WIFI router, the PSU and the 110V setup. I used the Cybertruck's 48VDC lightbar accessory port: The accessory port has 3...

Maybe not a rumble, does it sound more like a cyclical thing, like a frequency beat?. I just returned from my Tesla service call and they said that noise is normal and it originates from the gearbox, which is a bit dissappointing. He also offered to show the same symptom on another cybertruck...

You need more airflow for the 48->12V DC-DC converter. I would use velcro to the CT frunk (away from cooler) or for a more permanent install I would ~M5 self-tapping screws, they like this kind of plastic. For a quick disconnect I used this waterproof connector for my 48V lightbar accessory...

Interesting. Thanks. I looked up my Cybertruck tire markings and they have the same abbreviation "LT".

I dove my Model Y to Prudhoe Bay and back using standard 18" tires and during the trip I lost a tire by driving almost ~1,000 miles on Dalton HWY. Basically 60% gravel+potholes, 40% asphalt road I would like to do a similar trip on Dempster HWY, this time with Cybertruck. Are the Cybertruck...

Thanks. Neat mode! Unfortunately the reset option is not available there.... :( Maybe the 'reset' option appears only if there is something in need for reset, which is kind of silly if true.

My 48V Aux port stopped providing power. I checked the service manual and there is a 'reset' option but in my Cybertruck doesn't show up. Am I doing something wrong here? There is no "Outlets under Controls" and there is no Reset under Outlets & Mods. Help!

I think there is a re-calibrate option. The aeroflap has a sponge-like gasket, make sure it is not torn apart.

I managed to cleanly route a 110V 'flat extension cord" (and other RF cables) from the center console to the rear seats. The carpet or the rubber mats make it disappear. I have a 12V 35APSU under the rear seats, near my HF power amp. I also connected a 12V heavy-duty cigarette lighter wire...

I explored that capability (rooftop 48V) and I ended up making a nice install for my Starlink dishy mounted with 4 suction cups. The idea was to get t rid of the bulky Starlink WIFI router and the 110V power supply and have a small wifi+starlink+POE mounted on the glass rooftop. [email protected] was...