Search results

Just installed the new divider. The old divider was purchased in July, 2024. The new divider is much easier to move around - once I removed the ‘extra’ rubber foot from the bottom. Easy to do, just remove two small bolts. New divider on top: New divider on the left:

$2,500 + $252 for remove/replace labor. Wow.

The non-streak and its ability to clean. It’s really something. And it’s the only affordable thing BMW sells, haha!!

I’ve found nothing better than BMW Washer Fluid Concentrate. About $4.00 a bottle. Amazingly effective. Can be mixed as you like. I usually use 1/2 a bottle of concentrate per gallon of water. Also available at Mini dealers. https://shop.bmwusa.com/products/detail.83192221702.html

Just got my email for divider replacement (originally bought in July 2024) after emailing Tesla through the shop. Thanks to everyone who supplied this info!!

Understood. I was thinking “what does this do for CB/AWD folks that the bed outlets don’t?” Seems like this is geared toward the RWD with no bed outlets.

Is this for the RWD with no bed outlets?

https://shop.tesla.com/product/powershare-outlet-adapter

Tesla has released a Cybertruck Powershare Outlet Adapter for $80. "Allows you to power electronic devices using Mobile Connector and your Powershare-equipped vehicle's battery. You can then use this adapter to plug in any compatible electronic device you want to power."...

I got mine when they first became available earlier this year.

Thanks!! Re: Color Book. Me either, haha!! It made all the difference. Unless you’re going for matte/satin black or white, or some other primary color, you absolutely will see a difference once sunlight hits the swatches. I was basically set on the ‘Ghost Metal Dark Green’ but once I had it in...

Rolling out across the fleet

Haha!! Yeah, wait until after vacation!! Another bonus with Twraps: You don’t need to remove the mirrors or fender flares before install. The wrap just tucks about 1mm in between the flares and stainless. You might have to push/pull on the flares a bit to make room for the film to tuck as...

Here you go!!

Got it. Twraps really put a lot of thought into the edge wrapping. Lots of relief cuts. I still had to do my part and go slow, but the edges came out great.

Great question!! - Don't rush (no really, DON'T RUSH): There's plenty of time to get it right and you can always pull the panel up and start over if things get weird. The wet install makes that easy. - Buy the PPF kit from Amazon (Twraps also sells a kit): The kit has VERY useful edge tools...

Oh no!! Was it vinyl or PPF? I ask because Twraps is PPF and is a wet install. In my mind, wet install seems like it would be easier? I have no previous film experience so maybe dry is easier, haha!!

About 10 hours over two days. That includes panel prep. Prep: That's another thing I liked about Twraps. There is no elaborate panel prep beforehand. If you watch their install video, the panel prep is done as you go: Soap spray and wipe down, soap/scrape, soap/rubber squeegee, IPA wipe down...

No, that's not my truck. That ^ color is 'Matte Ghost Metal Dark Green', which was a color I was considering, but it was a little too 'sparkly' for my taste. I used 'Matte Mysterious Green' BTW, Twraps will sell you swatch books with 300+ PPF colors. You buy it for $99. They refund the $99 in...

Hello everyone, I know, I know…oh look, another CT getting wrapped, haha!! Just wanted to give a shout-out to @TWRAPS and their fantastic PPF Wrap Kit. Awesome commo throughout the process (pre-order, order, after sale). The cuts on the panels were perfect. Their install video and written...