Search results

If you search the forum you will find detailed information including photos for a hidden flap that allows cabling to be run into/out of the center console. I will search for it and repost if I find it.

Superb placement Hemiarch! Nicely done!

The control arm skid plates should not interfere in the least with the installation of the Tesla Terrestrial Armor. But your existing side-steps should probably be taken off. The service center junked my rear air-dam deletes when installing the Tesla Terrestrial Armor, so you might wanna...

As a former electronic countermeasures technician in the service, I approve of this message. Protect yourself, before you wreck yourself! Well done, sir! I have a Uniden and use the “Drive Smarter” app with it. F@cking love that thing.

I’ve not rubbed on the textured section getting in and out. That portion is mostly underneath except for the bottom 1/2 of the side. And that bottom half kinda angles away from anyone getting in or out. I tried to capture that with more photos.

Where? Texas? What cowards!

I would never sue Tesla! But if given the chance I’d sue Torque “News” with payment in goats and Tesla credits.

With the door open there is about a 2-inch flat edge that might be used as a step.

I have also ordered on their waitlist!

I did an install of the TesStudio S92 camera by side-tapping into the front windshield camera power feed. The rearview would only turn off when the truck’s cameras turned off. So they would cycle on whenever sentry mode came on. For different 12v applications I installed an Auxbeam 4 switch...

OBD2 pin 16 is 12 volt, always on. But the various versions of rear view cameras are drawing power from a harness interconnect that interjects into a native OEM section of harness, some pulling power from the front windshield camera power source and others from the passenger footwell area. I...

You can seal it better with some “D-shaped” rubber strips. It alleviates most of the dust entry into the bed area.

You state that the CT has a 48”W” power cord in the frunk. This is the frunk accessory feed and it maxes out at 400 Watts, not 48. It is 48 volt DC. If you want to turn that DC into AC, it won’t be as potentially powerful in wattage terms as the bed’s 110 volt outlet. The bed has a maximum...

I hate to be the contrarian on this specific issue, but I don’t think Tesla will do this for the CT because the CT has 25% greater kw hours capacity as compared to the recent Model X. It is a signicant difference. Right now I have a loaner X (my CT is getting terrestrial armor installed) and...

CybertruckCo has both front (https://cybertruckco.com/product/cybertruckco-front-control-arm-skid-plates/) and rear (https://cybertruckco.com/product/cybertruckco-rear-control-arm-skid-plates/) control arm sliders. The rear ones are now available on the website for back order and will only...

Follow the thread backwards a bit and you can see the one I bought that is linked.

I couldn’t find the skid plates for the rear of the truck on their website. Did your order the rear skid plates from CybertruckCo?

So instead of all the way near the edges, closer to the touchscreen? I’ll be you could fold the led strip back on itself to make it less lengthy.

Is your suggestion to place the led on the yoke?

You have an awesome garage. Nice! I think I’ll order the control arm skid plates. My truck is getting the terrestrial armor installed right now. Got an X as a loaner. First time driving the X, and this one only has 600 miles on it. FSD in the X is next-level amazing. Thanks for posting!