9k Ton IDRA Gigapress For Cybertruck Has ARRIVED IN USA!

[greggertruck]

9K ton is IN USA now!

-Model Y presses weigh roughly 100k LBS for reference. This press weight 175k LBS roughly.

"What about that video that came out last night?" - I'd assume Tesla has some say so on the press surrounding their press they worked together on.

TEXAS DCM means Texas Die Cast Mold. This is appearing to be THE 9K press.

*****EDIT****** Its 9 20' containers. whew. This is full detail of the break down. This is absolutely it!

UPDATE AGAIN.. IT'S HERE! That ship already dropped off, left, went to Norfolk, and is going back to Italy now. It ARRIVED 9.28. Visuals are IMMINENT!
Ship departed 8.31 in Italy, porting a few places along the way and finally landing in Houston on 9.28! see the log here: https://www.myshiptracking.com/vessels/altamira-express-mmsi-477547100-imo-9407146

Elon seems to have confirmed.

Sponsored

 

[Ogre]

Confirmation from a second source…

EDIT: Nope… same source I guess, comes from the same site GGT linked above

Hmm. This is tasty. Timing is right.

 

[greggertruck]

Confirmation from a second source…

Hmm. This is tasty. Timing is right.

That's literally my link above dude. bahaha just post the link to this forum already. I sent that specific shot to Sawyer Merritt hours ago..

 

[Ogre]

That's literally my link above dude.

I followed your link and saw that.



Nice find.

 

[greggertruck]

I followed your link and saw that.



Nice find.

Not you dude, I meant the twitter dork. He's either getting it from Sawyer or here. There is many places to track vessels on the water, awful unlikely he somehow used the same one, infuse the same shot I even sent to Sawyer.

Just wish they'd not pretend they were informed some how, it's the community. Small hill to die on maybe. Alex is a dork.

 

[audi2tesla]

Exciting!

 

[Ogre]

Hmm. The shipping code makes it sound more like some kind of telecom or electronics equipment.

TEXAS DCM means Texas Die Cast Mold.

Or it could mean Digital Camera Module. Hmm.

The fact that it comes from Italy sure points towards it being a GP though.

 

[greggertruck]

I'm almost entirely positive you'll see a Giga Texas produced truck by April 30 23' dude.

 

[Ogre]

Seems like Musk is confirming it here. Or at least replying to a story about it and not denying it.



Seems more and more like this is legit!

 

[Dids]

Yippee. Woo hoo .

 

[Ogre]

I'm almost entirely positive you'll see a Giga Texas produced truck by April 30 23' dude.

Chances are getting better seemingly every day. Cleanerwatt just had a good video on how Tesla’s battery day ambitions are finally starting to come coalesce.

 

[RetiredRonTesla]

9K ton is IN USA now!

-Model Y presses weigh roughly 100k LBS for reference. This press weight 175k LBS roughly.

"What about that video that came out last night?" - I'd assume Tesla has some say so on the press surrounding their press they worked together on.

TEXAS DCM means Texas Die Cast Mold. This is appearing to be THE 9K press.

*****EDIT****** Its 9 20' containers. whew. This is full detail of the break down. This is absolutely it!

UPDATE AGAIN.. IT'S HERE! That ship already dropped off, left, went to Norfolk, and is going back to Italy now. It ARRIVED 9.28. Visuals are IMMINENT!
Ship departed 8.31 in Italy, porting a few places along the way and finally landing in Houston on 9.28! see the log here: https://www.myshiptracking.com/vessels/altamira-express-mmsi-477547100-imo-9407146

Elon seems to have confirmed.

9K ton is IN USA now!

-Model Y presses weigh roughly 100k LBS for reference. This press weight 175k LBS roughly.

"What about that video that came out last night?" - I'd assume Tesla has some say so on the press surrounding their press they worked together on.

TEXAS DCM means Texas Die Cast Mold. This is appearing to be THE 9K press.

*****EDIT****** Its 9 20' containers. whew. This is full detail of the break down. This is absolutely it!

UPDATE AGAIN.. IT'S HERE! That ship already dropped off, left, went to Norfolk, and is going back to Italy now. It ARRIVED 9.28. Visuals are IMMINENT!
Ship departed 8.31 in Italy, porting a few places along the way and finally landing in Houston on 9.28! see the log here: https://www.myshiptracking.com/vessels/altamira-express-mmsi-477547100-imo-9407146

Elon seems to have confirmed.

Awesome! Light, tunnel, end of!

 

[Jhodgesatmb]

9K ton is IN USA now!

-Model Y presses weigh roughly 100k LBS for reference. This press weight 175k LBS roughly.

"What about that video that came out last night?" - I'd assume Tesla has some say so on the press surrounding their press they worked together on.

TEXAS DCM means Texas Die Cast Mold. This is appearing to be THE 9K press.

*****EDIT****** Its 9 20' containers. whew. This is full detail of the break down. This is absolutely it!

UPDATE AGAIN.. IT'S HERE! That ship already dropped off, left, went to Norfolk, and is going back to Italy now. It ARRIVED 9.28. Visuals are IMMINENT!
Ship departed 8.31 in Italy, porting a few places along the way and finally landing in Houston on 9.28! see the log here: https://www.myshiptracking.com/vessels/altamira-express-mmsi-477547100-imo-9407146

Elon seems to have confirmed.

The H.S. Code (I know these can be arcane) says that it is electrical equipment, not manufacturing equipment. The weight seems right and the number of containers but I cannot believe it until I see it.

 

[Daddystired]

9K ton is IN USA now!

-Model Y presses weigh roughly 100k LBS for reference. This press weight 175k LBS roughly.

"What about that video that came out last night?" - I'd assume Tesla has some say so on the press surrounding their press they worked together on.

TEXAS DCM means Texas Die Cast Mold. This is appearing to be THE 9K press.

*****EDIT****** Its 9 20' containers. whew. This is full detail of the break down. This is absolutely it!

UPDATE AGAIN.. IT'S HERE! That ship already dropped off, left, went to Norfolk, and is going back to Italy now. It ARRIVED 9.28. Visuals are IMMINENT!
Ship departed 8.31 in Italy, porting a few places along the way and finally landing in Houston on 9.28! see the log here: https://www.myshiptracking.com/vessels/altamira-express-mmsi-477547100-imo-9407146

Elon seems to have confirmed.

YESS! YES! YESSSSSSS!!!!!

Sponsored