CYBERTRUCKco World’s First Production-Intent roofrack w/ custom rooftop tent

[Roger@CYBERTRUCKco]

Hey guys, happy Friday! After a long week, and a little bit of “pimp my ride”, we got the first article production modular roof rack/ camper top completed! We’ve got some minor changes to the roof panels and get assembly down, but we should be good to start selling this at the end of July.

It weighs just under 300 pounds and we partnered with Badass tents for the tent fabric. The tent has a pass-through door in the back of it to climb up into it and also a rain fly let’s roll up in these photos.

It’s got a 3 inch memory from mattress with reversable bedding. Every tent will be slightly different. This one has Chewbacca on one side and Dia De Los Muertos on the other side. It looks pretty cool. I wish I would’ve taken a photo before she left for this weeks media tour.

Our Sister company, Lormac Plastics produced the polycarbonate windows and rear door. It’s got stainless steel top panels, anlso anvailable in powder coated matte black, and a white aluminum composite roof to keep the heat down. Also available; stainless steel side panels and rear door as well as the molle panel walls we shared before also work with us set up.

We partnered with Baja Designs for the Lights. This one has 8x XL linkables on top and a 40” S8 light bar in the bumper. It’s about $3500 in Lights and at night it looks like daytime with them on. we also have 6x LP9 pros and ditch lights that we didn’t have time to add to the grill and hood but in two weeks when it gets back will do that.

Best of all, in my opinion, is that this starts with the roof rack and you can build it out in many different ways. More accessories and camper build out options. Will be available shortly.

Let me know what you guys think!

Sponsored

 

[tmeyer3]

Looks cool! Are those glass panels on the rack? Is the whole thing 300lbs or just the tent?

 

[TeslaKen]

I'd like to see what the tent looks like from inside or from entering it from the rear of the truck, etc. Thx

 

[Roger@CYBERTRUCKco]

Looks cool! Are those glass panels on the rack? Is the whole thing 300lbs or just the tent?

Not glass, they are polycarbonate. The whole set up just under 300lbs. The 10th frame and body itself probably weighs about 130 pounds because of the stainless steel roof panels. We made them too thick build the same thickness as the vehicle so we’re going to send them down for production.

 

[Chris9702L]

Where is the media tour?

 

[deftguru]

Wow! Love the creativity! Looks spacious! Wish in the future it could double as a solar roof! Even if it got 2-3kwh in the sun I'd be happy with it! Thanks for sharing!

 

[Ri22]

Well this is a solution for the problematic sail trim.

No but really... Looks great.. would love to see the inside.

 

[Earthxploration]

Hey guys, happy Friday! After a long week and a little bit of pimp my ride we got the first article production modular roof rack/ camper top completed! We’ve got some minor changes to the roof panels and get assembly down, but we should be good to start selling this at the end of July.

It weighs just under 300 pounds and we partnered with Badass tents for the tent fabric. The tent has a pass-through door in the back of it to climb up into it and also a rain fly let’s roll up in these photos.

It’s got a 3 inch memory from mattress with reversable bedding. Every tent will be slightly different. This one has Chewbacca on one side and Dia De Los Muertos on the other side. It looks pretty cool. I wish I would’ve taken a photo before she left for this weeks media tour.

Our Sister company, Lormac Plastics produced the polycarbonate windows and rear door. It’s got stainless steel top panels, and an aluminum composite roof. The roof is white to keep the heat down. Will also offer the roof and powder coated black. Will also be offering stainless steel side panels and rear door as well as the panels we before also work with us set up.

We are also partnered with Baja Designs for the Lights. This one has eight xl linkables on top and a 40 inch S8 light bar in the bumper. It’s about $3500 in Lights and at night time it looks like daytime with them on. we also have six LP nine pros and ditch lights that we didn’t have time to add to the grill and hood but in two weeks when it gets back will do that.

Best of all in my opinion is that this starts with the roof rack and you can build it out in many different ways. More accessories and camper build out options. Will be available shortly.

Let me know what you guys think!

Roger, great job man. The rack looks freakin fantastic! I need those lights!

 

[Spacenoddle]

I believe it is very functional but it is really ugly

To be fair,it looks ok when the tent is up. But it looks like a funeral home vehicle when it is close.

 

[rizvend]

Hey guys, happy Friday! After a long week and a little bit of pimp my ride we got the first article production modular roof rack/ camper top completed! We’ve got some minor changes to the roof panels and get assembly down, but we should be good to start selling this at the end of July.

It weighs just under 300 pounds and we partnered with Badass tents for the tent fabric. The tent has a pass-through door in the back of it to climb up into it and also a rain fly let’s roll up in these photos.

It’s got a 3 inch memory from mattress with reversable bedding. Every tent will be slightly different. This one has Chewbacca on one side and Dia De Los Muertos on the other side. It looks pretty cool. I wish I would’ve taken a photo before she left for this weeks media tour.

Our Sister company, Lormac Plastics produced the polycarbonate windows and rear door. It’s got stainless steel top panels, and an aluminum composite roof. The roof is white to keep the heat down. Will also offer the roof and powder coated black. Will also be offering stainless steel side panels and rear door as well as the panels we before also work with us set up.

We are also partnered with Baja Designs for the Lights. This one has eight xl linkables on top and a 40 inch S8 light bar in the bumper. It’s about $3500 in Lights and at night time it looks like daytime with them on. we also have six LP nine pros and ditch lights that we didn’t have time to add to the grill and hood but in two weeks when it gets back will do that.

Best of all in my opinion is that this starts with the roof rack and you can build it out in many different ways. More accessories and camper build out options. Will be available shortly.

Let me know what you guys think!

Looks expensive. How much is this gonna eventually set me back again?

 

[GFleck]

Love seeing stuff like this starting to come out! Bed / mattress dimensions? Do you know cost yet?

 

[Roger@CYBERTRUCKco]

Where is the media tour?

CA road trip up the coast from San Diego, Tahoe, Yosemite, SoCal. Then back to Monterey the following week for Laguna Seca motorcycle race

 

[Roger@CYBERTRUCKco]

Love seeing stuff like this starting to come out! Bed / mattress dimensions? Do you know cost yet?

48x88”

not yet, need the final BOM on the tent topper. Probably will end up Similar price to a GFC, Dirtbox, etc fully optioned being made in the USA.

 

[Roger@CYBERTRUCKco]

Wow! Love the creativity! Looks spacious! Wish in the future it could double as a solar roof! Even if it got 2-3kwh in the sun I'd be happy with it! Thanks for sharing!

We have the solar panels but ran out of time to add them and set up wiring.

 

[Roger@CYBERTRUCKco]

Looks expensive. How much is this gonna eventually set me back again?

Modular rack frame will start around $1500 then it goes up from there

Sponsored