Hansshow V2 to replace V1 (rear view mirror)

[Banker]

I’m considering replacing V1 due to non functioning front camera.

is there also a V2+?

It’s my understanding that I will also need to replace the rear camera. Snaking the V1 wire was a pain. Any helpful videos?

And I would appreciate a link for STL file for new rear camera housing.

is Hansshow still the buyers choice for the rear view mirror replacement?
many thanks for guidance and sharing experiences etc.

Sponsored

 

[misdemeanor]

And I would appreciate a link for STL file for new rear camera housing.

Multiple available online:

1. This is the one that I printed, but the filament I used didn't last long.. https://www.thingiverse.com/thing:6849986
2. I ordered this one to replace it and it's currently what's on my truck https://www.etsy.com/listing/4349308078/tesla-cybertruck-rear-camera-housing-for
3. https://cults3d.com/en/3d-model/game/tesla-cybertruck-hansshow-rear-camera-housing
4. https://www.thingiverse.com/thing:6825721

 

[That Beast Mode]

There is a v2 and what some people call a v2.5, which has the front facing camera built into the mirror instead of external mount. Just a heads up, there is a problem with the wire harness on the new v2 one where it knocks out one or two of your passenger speakers - they have said they are working on fixing the problem but other users and myself have not been able to get a resolution for months. The files for the housing are on Makerworld, but you're probably better off buying it from hansshow if you buy the mirror, its an extra $10..
I believe @TeslaKen has an install video on it, I'll let him take it from here and give you the link.

 

[TeslaKen]

Multiple available online:

1. This is the one that I printed, but the filament I used didn't last long.. https://www.thingiverse.com/thing:6849986
2. I ordered this one to replace it and it's currently what's on my truck https://www.etsy.com/listing/4349308078/tesla-cybertruck-rear-camera-housing-for
3. https://cults3d.com/en/3d-model/game/tesla-cybertruck-hansshow-rear-camera-housing
4. https://www.thingiverse.com/thing:6825721

The 1st housing you printed i have modified and made available in the comments of the listing you provided in the first item on your list. I printed mine from PetG and it worked great and is still fine on my truck after 8 months. You csn also find it available in the article on my site at www.halocybertruck.com

Article here : https://halocybertruck.com/article-list/f/cybertruck-digital-rearview-mirror-from-hansshow-v2

 

[Cosmos78]

I’m considering replacing V1 due to non functioning front camera.

is there also a V2+?

It’s my understanding that I will also need to replace the rear camera. Snaking the V1 wire was a pain. Any helpful videos?

And I would appreciate a link for STL file for new rear camera housing.

is Hansshow still the buyers choice for the rear view mirror replacement?
many thanks for guidance and sharing experiences etc.

I bought a camera for 100 bucks and printed a housing for the roof.

 

[misdemeanor]

You csn also find it available in the article on my site

You've got a lot of things going on on that site. Can't find the article.

 

[dralkim86]

I have the Hansshow v2.5 camera. I like it for the most part. My only issue with it is the fact that the UI was clearly made in China. It looks cheap and very finnicky. The camera itself is great.

 

[TeslaKen]

You've got a lot of things going on on that site. Can't find the article.

I posted the exact article link above and will post it here again for the browser challenged:
https://halocybertruck.com/article-list/f/cybertruck-digital-rearview-mirror-from-hansshow-v2

 

[Jhodgesatmb]

I’m considering replacing V1 due to non functioning front camera.

is there also a V2+?

It’s my understanding that I will also need to replace the rear camera. Snaking the V1 wire was a pain. Any helpful videos?

And I would appreciate a link for STL file for new rear camera housing.

is Hansshow still the buyers choice for the rear view mirror replacement?
many thanks for guidance and sharing experiences etc.

I believe there is a V2 but I am waiting for a version that has integrated side cameras (e.g., that uses the Gentex FDM/CMS system) as well.

 

[That Beast Mode]

I posted the exact article link above and will post it here again for the browser challenged:
https://halocybertruck.com/article-list/f/cybertruck-digital-rearview-mirror-from-hansshow-v2

@TeslaKen what Bambu 3d printer did you use to print the Big Bed Cannon? It's pretty large. I know you did it in pieces but each section still looks pretty big for a hobby level printer, how many hours was it?

 

[ABILISK]

@TeslaKen what Bambu 3d printer did you use to print the Big Bed Cannon? It's pretty large. I know you did it in pieces but each section still looks pretty big for a hobby level printer, how many hours was it?

Oh I didn’t know the cannon in the bed was 3D printed. Thats one of the coolest mods. Must be a massive printer for that.

 

[That Beast Mode]

Oh I didn’t know the cannon in the bed was 3D printed. Thats one of the coolest mods. Must be a massive printer for that.

He printed it in sections and assembled, I don't think they make a printer large enough to print a big bed cannon that size in one shot... Maybe some industrial level stuff could.

 

[hemiarch]

That big bed cannon was highly contentious at one of your events right Ken?

 

[TeslaKen]

@TeslaKen what Bambu 3d printer did you use to print the Big Bed Cannon? It's pretty large. I know you did it in pieces but each section still looks pretty big for a hobby level printer, how many hours was it?

X1 Carbon 255x255x255 print space, about 65 parts and took about a month to print it all. Should be some articles on my website about it and lots of pics.

 

[TeslaKen]

That big bed cannon was highly contentious at one of your events right Ken?

Yes very much so.

Sponsored