Mirror Delete: 100% Cybertruck Steel [TESBROS]

[TESBROS]

Hey y'all,

Shortly after we got our Cybertruck last year, we were lucky enough to get our hands on an actual CT door. Of course, we did the first thing any normal person would do—we tested how vinyl removability was. Then, we cut it up into a bunch of pieces.

Why? Because we wanted to plug that mirror hole. A ton of you have been asking for a solution, and honestly, it took us a minute to get it just right. We tried a bunch of stuff. We thought about going over the steel, but nah, didn’t love the look. Tried under it, still not it. We tightened up the margins and got it to fit snug. Even tried welding (because why not), but getting it to look clean and consistent was a pain.

After all that trial and error, we finally landed on a solution we’re hyped about. It holds up in extreme heat (lookin' at you, Arizona) and the freezing cold up north. Basically, it's built to last like the Cybertruck.

We’re opening up a pre-sale this Friday. Heads up—it’s a super limited run because getting more CT stainless steel is pretty much a long shot. And because we love y'all, we’re throwing a little surprise gift in each order. Oh, also, we'll include an open-sourced SVG file so you can plot it and wrap the cover if you want.

Stay tuned. This one's gonna go quick.

Sign up to get early access here: https://tesbros.com/a/blog/cybertruck-limited-edition-stainless-steel-mirror-delete-kit

Unfortunately, it'll be pretty impossible for steel to match since it's from a different batch, but at least it's the real deal.

Sponsored

 

[ChiTownCT]

Signed up, lets goooo! I want the first batch

 

[dalton108]

In!

 

[Razorcrest]

In! Best mirror delete solution I've seen

 

[TheDarkRanger]

Cool! With that miniscule reduction in drag mine will still be governed at 116mph.

 

[Brandon708]

I'd like a set.

 

[cybercricket]

Curious - what's the efficiency improvement without the mirrors ?

 

[Balthezor]

Color and finish is different from the CT. Wondering what happened when it was cut.

 

[Shadowmite]

Curious - what's the efficiency improvement without the mirrors ?

Based on the wind tunnel tests it should be extremely minimal if anything. But what we need is Out of Spec Kyle to go head to head with a mirror delete truck (also a beast would be needed) and do a side by side trip for say 100 miles at 80 to see what the actual difference is in wh/mi.

 

[Known-Background]

Any pics are f the full truck curious how it looks from afar

 

[Crissa]

Based on the wind tunnel tests it should be extremely minimal if anything. But what we need is Out of Spec Kyle to go head to head with a mirror delete truck (also a beast would be needed) and do a side by side trip for say 100 miles at 80 to see what the actual difference is in wh/mi.

Over an entire battery at freeway speed, it'd show up.

-Crissa

 

[petercyber]

This is great! I’ve been waiting for this kind of solution. I’ve signed up. What is your estimated delivery time?

 

[Zane Edwards]

Hey y'all,

Shortly after we got our Cybertruck last year, we were lucky enough to get our hands on an actual CT door. Of course, we did the first thing any normal person would do—we tested how vinyl removability was. Then, we cut it up into a bunch of pieces.

Why? Because we wanted to plug that mirror hole. A ton of you have been asking for a solution, and honestly, it took us a minute to get it just right. We tried a bunch of stuff. We thought about going over the steel, but nah, didn’t love the look. Tried under it, still not it. We tightened up the margins and got it to fit snug. Even tried welding (because why not), but getting it to look clean and consistent was a pain.

After all that trial and error, we finally landed on a solution we’re hyped about. It holds up in extreme heat (lookin' at you, Arizona) and the freezing cold up north. Basically, it's built to last like the Cybertruck.

We’re opening up a pre-sale this Friday. Heads up—it’s a super limited run because getting more CT stainless steel is pretty much a long shot. And because we love y'all, we’re throwing a little surprise gift in each order. Oh, also, we'll include an open-sourced SVG file so you can plot it and wrap the cover if you want.

Stay tuned. This one's gonna go quick.

Sign up to get early access here: https://tesbros.com/a/blog/cybertruck-limited-edition-stainless-steel-mirror-delete-kit

Unfortunately, it'll be pretty impossible for steel to match since it's from a different batch, but at least it's the real deal.

Really well made and will give the truck a much cleaner look. I am confident with the cameras but did a quick driving test and I am using my side mirrors when not in FSD

 

[TESBROS]

This is great! I’ve been waiting for this kind of solution. I’ve signed up. What is your estimated delivery time?

Ship date is next Friday. We've built a jig and we're hand assembling them so it does take some time but all the steel is cut and ready to be assembled! We also have a special product that comes with this that I think people will like. But that's a surprise.

 

[TESBROS]

Color and finish is different from the CT. Wondering what happened when it was cut.

Unfortunately, all CT steel isn't the same which is why some trucks look very different panel to panel at times. But we made sure to cut in the right grain!

Sponsored