Side Mirror Delete Kit installed from CYBERTRUCKco today

[Roger@CYBERTRUCKco]

Billet Aluminum Mirror Delete Kit - https://cybertruckco.com/product/cybertruckco-billet-aluminum-mirror-delete-kit/

Finally arrived today and installed, looks badass! Took 15min to remove mirrors and install.

Pros: sleeker look, like the concept, better side visibility across the A piller. I like the detail lines on them, match the locking caps.

Cons: takes a second to look at the center screen when using turn signals for the camera. Although if you glance at the side and somebody there the red warning light comes on.

I know other customers shipped today as well.

what do you guys think?

Sponsored

 

[OneDanik]

I feel it could be more flat and cleaner looking

 

[ModelAZ]

Billet Aluminum Mirror Delete Kit - https://cybertruckco.com/product/cybertruckco-billet-aluminum-mirror-delete-kit/

Finally arrived today and installed, looks badass! Took 15min to remove mirrors and install.

Pros: sleeker look, like the concept, better side visibility across the A piller. I like the detail lines on them, match the locking caps.

Cons: takes a second to look at the center screen when using turn signals for the camera. Although if you glance at the side and somebody there the red warning light comes on.

I know other customers shipped today as well.

what do you guys think?

Looks great having that Cybertruck angular / triangular design. I prefer this to a flat piece look actually.

Must feel great being made from billet aluminum.

 

[Roger@CYBERTRUCKco]

They look like high end motorcycle parts.

She also has has the lift rod mods that’s being finalized now; 5/8” higher in low, 1” higher in medium and 2” higher in high mode. Rides just as nice and sits like a proper truck now

 

[loganthefrst]

Wait until you see options coming out from a well known Tesla Accessory maker is released. Will be much cleaner and sheek than this but happy to see there are options.

 

[MaximGlory]

My worry would be that if you put together different kinds of metals, there will be a chemical reaction. I think it was mentioned on Munro too that they have to isolate the gigacasting from the steel shell.

From our new friend, ChatGPT:

When aluminum and steel are in contact, especially in the presence of an electrolyte (like water), a galvanic reaction can occur. This can cause corrosion, particularly of the aluminum, due to the difference in their electrochemical potentials. It's similar to a battery. The aluminum and steel form a galvanic cell where aluminum acts as the anode and corrodes, while steel acts as the cathode and is protected from corrosion.

 

[Nexus6]

My worry would be that if you put together different kinds of metals, there will be a chemical reaction. I think it was mentioned on Munro too that they have to isolate the gigacasting from the steel shell.

From our new friend, ChatGPT:

When aluminum and steel are in contact, especially in the presence of an electrolyte (like water), a galvanic reaction can occur. This can cause corrosion, particularly of the aluminum, due to the difference in their electrochemical potentials. It's similar to a battery. The aluminum and steel form a galvanic cell where aluminum acts as the anode and corrodes, while steel acts as the cathode and is protected from corrosion.

Coming from an Aerospace background, I was just going to say the same thing.

 

[Nexus6]

Coming from an Aerospace background, I was just going to say the same thing.

I would have preferred a Carbon Fiber cover.

 

[Freemarket]

I have not installed these yet, but I found Midnight Garage out of Fremont that’s fabricating these. I was going to wrap it with my 3M white vinyl too, but when I had the mirrors off and drove it, I actually preferred the beefy size of the mirrors on the truck so I haven’t installed them. They include a thick rubber gasket to run around the edges to create a water tight seal too. I personally would prefer the flush look that these provide; but the ones you installed are pretty cool too! Nice work.

These guys can be reached at [email protected].

 

[rizvend]

Billet Aluminum Mirror Delete Kit - https://cybertruckco.com/product/cybertruckco-billet-aluminum-mirror-delete-kit/

Finally arrived today and installed, looks badass! Took 15min to remove mirrors and install.

Pros: sleeker look, like the concept, better side visibility across the A piller. I like the detail lines on them, match the locking caps.

Cons: takes a second to look at the center screen when using turn signals for the camera. Although if you glance at the side and somebody there the red warning light comes on.

I know other customers shipped today as well.

what do you guys think?

Best looking one so far but the side mirrors kinda adds to the design...so torn...

 

[ChristoN]

Billet Aluminum Mirror Delete Kit - https://cybertruckco.com/product/cybertruckco-billet-aluminum-mirror-delete-kit/

Finally arrived today and installed, looks badass! Took 15min to remove mirrors and install.

Pros: sleeker look, like the concept, better side visibility across the A piller. I like the detail lines on them, match the locking caps.

Cons: takes a second to look at the center screen when using turn signals for the camera. Although if you glance at the side and somebody there the red warning light comes on.

I know other customers shipped today as well.

what do you guys think?

I think an aftermarket door handle concept similar to this would be nice too.

 

[tmeyer3]

They look great!! As long as there's a rubber boundary between the aluminum and steel you'll be good.

 

[REM]

I was looking at prototyping this exact type of replacement, considering that most states that require side mirrors are often very vague at what technically constitutes as a "mirror".

 

[tingmo13]

No part is the best part!-no start button, no stalk, no door handles, no mirror, no buttons & knobs-what a saving!!! It's sounds/looks so great to be a long term T$LA investor!!

Sponsored