Sponsored
misdemeanor's latest activity
-
misdemeanor replied to the thread PCS POLL PT. 1 (Model/Year).I usually charged at 30A until I got the failure. Now I can only charge at 24A max. -
-
misdemeanor replied to the thread PCS parts - anyone get any dates yet?.New badge available in the app!
-
-
misdemeanor replied to the thread PCS parts - anyone get any dates yet?.Mine failed on the morning of 4/29. I immediately opened a service request and was given free supercharging until 7/28. My service...
-
-
misdemeanor replied to the thread BestEvMod’s April Giveaway.Took this while visiting family in Florida.
-
-
misdemeanor replied to the thread XPEL Armour piece for rear seat underside.https://parts.tesla.com
-
misdemeanor replied to the thread New true 500 kWh V4 Supercharger Locations.https://dcfctracker.com/
-
misdemeanor reacted to TexasDev's post in the thread Console Vault brand vehicle safe now available. with
Like.
honestly how secure is that. It's surrounded by plastic trim. a crowbar is easily going to take that out, and wouldn't take much time to... -
misdemeanor replied to the thread AO XPEL Protective Film Installed.https://www.fueloffroad.com/fuel-1pc-contra
-
-
misdemeanor replied to the thread CyberGearCo CyberTent Install, Initial Test, Review.Yes, the quality won’t be the same as OEM.
-
misdemeanor replied to the thread New Cybertent install. Changes from YouTube videos.I went with the CyberGearCo tent https://www.cybertruckownersclub.com/forum/threads/cybergearco-cybertent-install-and-initial-test.56498/
-
misdemeanor replied to the thread New true 500 kWh V4 Supercharger Locations.
-
-
misdemeanor posted the thread CyberGearCo CyberTent Install, Initial Test, Review in Off-Roading, Overlanding, Camping GEAR -- Campers, CyberTent, Tents, Winch, Onboard Air, Coolers, Recovery Gear, Etc. -- Sponsored by UranusWander.Initial install Step 1 was to remove all my equipment and molle panels that I had installed. This tent does not come with the...
-
-
misdemeanor posted the thread AO XPEL Protective Film Installed in Show & Tell: Photos, Videos, Builds -- Sponsored by RealWheels EV.I installed the XPEL exterior protection kit from Abstract Ocean (@AO-Pete) for a client yesterday. It definitely transforms the look of...
-
-
misdemeanor replied to the thread Motionstream.app - Stream YouTube on your Cybertruck display screen - no restrictions (works while driving for passengers).MotionStream.app
-
misdemeanor replied to the thread Vault Storage - what do you carry in your bed at all times?? Show me yours and I'll show you mine.I own an EV maintenance company. My CT is my mobile service vehicle. What’s not pictured is anything in the smugglers bag, but I do have...
-
-
misdemeanor replied to the thread Side camera cover installed on fender (to protect against elements / snow / ice).I'm going to print it this week and post pics. Thanks for sharing the STL!
-
misdemeanor replied to the thread Sound Deadening - Part 1.We had some high winds on Sunday, so I can't count that as a good test. I went for another test drive today and it was VERY quiet. The...
-
misdemeanor replied to the thread Sound Deadening - Part 1.Correct, base layer should cover 90% of the surface. Then you can add an additional layer on top of that. About 60% coverage should...
-
misdemeanor replied to the thread Sound Deadening - Part 1.Around 2 hours per door. I’ve still got a Part 2 and 3 of this project to do.
-
misdemeanor replied to the thread Sound Deadening - Part 1.That's next on my list!
-
misdemeanor replied to the thread Sound Deadening - Part 1.I'll check that out. Thank you!
-
misdemeanor replied to the thread Sound Deadening - Part 1.More specifically on this clip. I recommend adding some felt where the upper and lower shrouds meet.
-
-
misdemeanor replied to the thread Sound Deadening - Part 1.Shouldn’t need to remove the shroud completely. Just try to add some closed cell foam to it since they tend to creak and make sounds...
-
-
misdemeanor replied to the thread PM_a041_dasMIA, DI_a141_dasMIA, ECU fault and no cameras working.Could also try a software reinstall in service mode.
-
misdemeanor replied to the thread Sound Deadening - Part 1.I didn’t, but the rear windows could use some adjustment. That’s next on my to do list.
-
misdemeanor replied to the thread Sound Deadening - Part 1.I’ve thought about doing this, but what I have now is pretty dang good. But I may try this method out if I even disassemble the door again.
-
misdemeanor replied to the thread Sound Deadening - Part 1.I can’t recall anything. Could it be the panel right below the squircle?
-
misdemeanor replied to the thread Sound Deadening - Part 1.It is, but getting to that point takes a lot of work.
-
misdemeanor replied to the thread SILAZANE50 Ceramic Coating Results - Review & Photos.Nice! I've got my two @silazane50 kits ready to go as well, but I'm just waiting until my CT gets wrapped in a few weeks. Looking...
-
misdemeanor replied to the thread PM_a041_dasMIA, DI_a141_dasMIA, ECU fault and no cameras working.I'd suggest trying the "Clear Camera Calibration" in service mode. You can also do it outside of service mode: Controls > Service >...
-
misdemeanor replied to the thread Sound Deadening - Part 1.I agree! Part of it is because the blower motor is literally mounted at the top right under the front dash. Installing any sound...
-
-
misdemeanor replied to the thread Sound Deadening - Part 1.Yes, there’s so much more that can be done. Next up is to put butyl and insulation on the rear cab wall to stop noise from the rear...
-
misdemeanor replied to the thread Sound Deadening - Part 1.Before I did this my baseline reading at 70MPH on the highway was 65dB. It was pretty quiet. After putting down the butyl and foam mats...
-
misdemeanor replied to the thread Sound Deadening - Part 1.The clips on the door panel were being difficult, I’m surprised I didn’t break any in the process. Other than that it was pretty...
-
misdemeanor posted the thread Sound Deadening - Part 1 in Show & Tell: Photos, Videos, Builds -- Sponsored by RealWheels EV.Shoutout to @ReidT22440 and @TeslaPatriot for the inspiration. I used some cheap butyl mats as the base, then went over that with Second...
-
