Search results

got the update last nite.

maybe this one. https://www.vevor.com/car-refrigerator-c_10723/vevor-12-volt-car-refrigerator-portable-freezer-16qt-truck-rv-fridge-app-control-p_010538366053

Any testing done to see the loss of air efficiency for intake/cooling?

Shock/vibration mounts

Possible should of, shored up the edge of the bed by tailgate to allow the bed of truck to take the weight instead of the tailgate. or use a device similar to this.

Pismo State Beach areas you can drive. PISMO STATE BEACH (CENTRAL CALIFORNIA) Most beach driving enthusiasts know that Pismo State Beach is a place that welcomes vehicles onto its shore. It is the only stretch of coastline in Central California where cars are allowed. The main entrance is at...

Okay after some investigation, think I found another problem. I reviewed the Munro Live video of the Tonneau cover overview. https://www.youtube.com/watch?v=MMgU_MFs2oU. At approx. 1:41 the engineer stated there are 29 slats. I counted from the tailgate end first to the cabin area. I got to the...

Thanks for the info... Will Chad be there for the grand opening?

Stainless Steel Bumper installed: Simple install. Note for persons with limited garage space. (It will add 4 additional inches forward of stock bumper.) Each side mounting parts consist of Machined parts, one sheet metal part and hardware. The hardware I'm changing mine to black stainless to...

Hmm, don't think people should give that information out. When you inquire to support , its like a security question they ask to verify your the owner of the vehicle.

Types of drills to use when drilling stainless steel. Carbide - Titanium - tungsten carbide. 2nd. Use step drill process. Start small, different sizes inbetween then final full size drill bit. Step Drill process Possible a quick disconnect be added incase sometime later on at some point you...

The only problem I see is the height aspect to the ground. I usually back up in parking spots. Parking spots either have a curb or stop cement. So, if you back up, be aware you'll either scrap the back side of the mud flap or tear it off. Design change is needed. A min. of 2 inches be removed.

I installed those. Hope you used some type of adhesive promoter. I learned many years ago, to prep the mating surface and then apply adhesive promoter, peel the tape off, and then installed the product. This will give you a great bond.

Did Tesla reimbursement everyone, due to no aero covers available??? ;)