Search results

Just added 3d printed tailgate corner guards to my door corner guards project. Here's the photos of them https://makerworld.com/en/models/2537374-cybertruck-door-and-tailgate-corner-guards#profileId-2793167

I designed a door corner guard for all 4 doors for this specific reason, because I've been cut by it. Probably not much I can do for the cantrails as it's just a long piece of metal, but I could probably adapt my current design for the tailgate. Just measured the tailgate, I can definitely make...

PGE only activates this maybe 10-15 times a year on hot days only, it's not every day, so you can think of it as another 2500-3500 miles a year in energy. You could likely make $500-1000 a year

Made my way through most of the application until I found PGE wants to charge $800 for an interconnect fee. Forget that, they can come begging and do it for free when they are running out of electricity and need me.

A 3D printable Cybertruck Behind Screen Storage Tray that I designed. You can put 2 together to make it nearly full display width https://www.cybertruckownersclub.com/forum/threads/3d-printable-cybertruck-behind-screen-storage-tray-customizable.56382/

A 3D printable Cybertruck Behind Screen Storage Tray that I designed https://www.cybertruckownersclub.com/forum/threads/3d-printable-cybertruck-behind-screen-storage-tray-customizable.56382/

https://makerworld.com/en/models/2609855-cybertruck-behind-screen-storage-tray-customize#profileId-2880247 I wasn't happy with all the other Amazon options for behind the screen storage, many had a flat bottom and were made out of plastic and your sunglasses would bang around and make noise...

I've seen a few around https://makerworld.com/en/models/761053-cyber-truck-door-handles?from=search https://makerworld.com/en/models/594996-cybertruck-door-pulls?from=search https://www.printables.com/model/1349755-cybertruck-door-handles...

Let me know if anyone has any ideas of accessories that might be worth designing out of plastic or TPU. If I like it I might just create it.

TPU is best for the softness and flexibility and is what I use for this, behind that is ASA, ABS or PETG.

Two new accessories I designed to be 3d printed. Door Corner Guard to prevent cuts and a Door Bottle Holder pad to prevent rattles. https://www.cybertruckownersclub.com/forum/threads/3d-printable-cybertruck-door-bottle-holder-pad-fixes-rattle.55740/#post-30784477...

2 more 3d printable accessories I designed for the Cybertruck, Door Corner Guard and a Door Bottle anti rattle pad https://www.cybertruckownersclub.com/forum/threads/3d-printable-cybertruck-door-corner-guard-prevents-injury.55739/#post-30784471...

I made a 3d printable Cybertruck door bottle holder pad which prevents your bottle from rattling against the plastic in the door. The pad is 0.6mm of TPU in the exact shape needed to fit that area which is nowhere near a square. Free to print...

Just finished up my design for a Door Corner Guard to prevent your leg from getting sliced if you happen to be too close to a closing door. I know I've gotten sliced once that way. Free to print...

Updated the design of the Phone/Tablet mount. I'm quite happy with it at this point, it uses a new thread which is much faster to adjust and a nicer to grip knurled nut. The threads are also thicker and stronger and the long version now can hold up to a 13" tablet and there's also a short...

I've now modified this tray to have phone charging cutouts with removable covers, so you can charge and eat. https://makerworld.com/en/models/1783579-tesla-cybertruck-food-tray-w-wo-phone-cutouts All the useful Cybertruck prints I've found around...

I'm surprised I didn't come across that one when I was looking for something that would work. Good catch! The downsides I see with that are the screen sits pretty low for viewing and it will definitely swing in the corners. It also won't fit anything smaller than a tablet. I like the gripping...

I made one https://www.cybertruckownersclub.com/forum/threads/3d-print-phone-tablet-holder-for-rear-passengers.48399/

V2 version with "anti sway bar" is up now!

I've found it does swing left to right on some roads, I'm currently printing out a revision to it that uses less filament and also a modular add on "anti sway bar" that I'll probably have up in a few hours. It's probably worth waiting for the second revision.