Wow what happened together bolt that was backing off causing this to come loose months ago? Did they get rid of the bolt now and just use adhesive?
I bought two tubes of black gasket sealant months ago to run along the seam to block water and wind ingress. I havenāt done it but thinking Iām...
Iād rather him load up the hummer again and put on a weigh safe hitch and point a camera at it and beat the shit out of it to see what the max tongue weight registers at.
but there has been at least one snap during what seemed like normal towing adding some murkiness.
Iām picturing a hummer EV...
This is a close compare https://a.co/d/8qBmWv3
According to Wes it can inflate all 4 tires within its 30min duty cycle from 15-50psi In about 25 minutes and hopefully can support a 4 way inflater.
love to see someone take their Costco inflator and see what numbers you get.
Air down to 15psi and see how long it takes or if at all to fill a 35ā tire to 50psi with your jump start compressor and youāll know whether 30min of continuous duty is worth it.
I think you could get the lightbar off with some wire pulled thru the adhesive as they do with window replacement. Perhaps the adhesive could be peeled off or dissolved with a solvent.
I should have added itās a 2022 aluminum trailer with basic led, side
Markers and two led strip bars.
I have a single led bar for
My bike rack and when plugged in the led will function but there is also a dim flicker. I have resistor Iām going to add to it to see if it goes away.
I have had it report red icon on 2 tows with no wiring issue. Couldnāt confirm if there were brake lights or not. Cleared it one time by replugging in and second time doing the test trailer lights cleared it. I did not have it go back to blue on its own.
Thanks for the pics. There is definitely too much interference to seat the right mount in your picture. Your bolts are definitely different than mine.
This is a good pic of how much in plane interference there is.
My install failed. The USB-C port is almost directly in line with the mounting bracket. All the install videos I see mention itās close, but this is not close. Itās straight up in line with it. Did Tesla make a change? I also noticed that the bolts holding in the OEM screen are not hex sockets...
I go back and forth from Chicago area to middle Michigan and did the 210 miles going from 95%->5% yesterday at 15*. The snowflake didnāt appear until 1 hr into the 3:45hr trip.
This is on the duratracs. Didnāt have a noticeable effect on range. Maybe 3-4% and was within 2% of the estimate soc...