Search results

yes, cant figure out why. Sometimes it would be days. But it sucks when it does because the settings I have saved for the button LEDs reset such as color and brightness.

Have my drunk 48v hooked up to an auxbeam 8ch controller powering Cybertruck Co Baja designs fogs and a rock light kit in the Urander Bed Cap waiting on the SatGear Starlink mini mount to arrive to wire up the starlink as well.

Interesting that you’re not getting any alerts for the trailer. Is it possible that it is the truck senses it when you have the other wires connected for the brake and turn signals

Found this on YouTube, looks like they were able to tap into the OEM air compressor

Wheels are Method 709HD bead grip 18x9 +12 with red impact rings Tires BF Goodrich KO3 285/75/18 Fog lights Baja Design Squadron Pro + CybertruckCo brackets wired up to the Auxbeam

Refurb directly from EcoFlow eBay, it’s $119 pre tax. Do not get the River 3 since it does not have the USB C input, only output.

I was just shimming through the other thread with the DC fridge install, looks to be the same issue. I have tried with the auxiliary power on, same issue. There would be days with the power feed on, then next drive it would be off. not sure if it is the truck going into deep sleep due to sentry...

So far so good! Just wish the power feed would always stay on. Sometimes I would get back in the truck and it would be off.

14 gauge per Jay, directly from the buck converter to the auxbeam controller and tied in the ACC to the Positive

Thank you so much! So in regards to the included auxbeam circuit breaker, that was not used. And as for the ACC wire you just tied into the the Buck converter’s 12v output? I do not have the Tsportline Buck converter which is rated at 350w with the four 12v output wires. I have the included...

hmm, I have the CybertruckCo Baja Designs front fogs as well as the CyberGear fridge. I’d like to add another 12v in the frunk as well. Also looking to add lights in my Urander Bed Cap for the dogs since the bed lights do not stay on while the truck is in motion. im just not seeing how you...

I just received my slim 8 gang. so to clarify you bypassed the included circuit breaker and wired the step down directly to the + and - on the controller? Did you use the included cables in the auxbeam kit? the gauge of the wires are pretty large compared to the wires coming from the step down...

so it’s pretty much the same as connecting the + and acc wires together on the auxbeam controller side to the 12v from the step down converter

I have my Uniden R8 in dark mode, with a cigarette to usb c. Not an issue with the “keep accessory power on” in the settings

Kids yes, Frenchie I’d say no…

It’s the Heininger Twistep Dog Step for Pick-up Trucks I have 3 dogs, St Bernard, Husky and a Maltese Terrier. The step is super helpful for them to get into the bed of the truck. I had one of those foldable stairs for them, but if the floor isn’t level, it is a bit wobbly. The downsides is I...

No more Polycarbonate! Finally received the updated glass window for the rear hatch! The polycarbonate looked good at first, but even with the countersunk hardware it would still crack over time. Urander is very welcome to customer feedback, the glass panel is the icing on the cake!

The HOV setting is definitely not reliable. On top of that FSD keeps wanting to enter and exit by crossing the solid double yellow lines. Had to take over on multiple occasions to prevent entering or exiting HOV lanes.

I’ve tried it with the EcoFlow wave 2 (5,100BTU). It will probably work for milder temps. However in the desert heat like vegas, the metal tonneau cover is not insulated, and with the dark color absorbing the heat, it wasn’t enough to cool the bed to a safe temperature. Maybe something with...