2nd Row Underseat Molle / PALS Panels Storage DIY

[vn_slcut]

Inspired by DIY others on this site, I decided I wanted underseat 2nd row storage for a IFAK and other travel necessities (air pillows /lightweight blanket).

Solution was underseat molle/pals panels:

The storage is convenient, doesn’t take up floor space, and is close at hand.

I used cheap hook&loop straps through the molle/pals panels to ensure the IFAK was grab/go in an emergency.

The project was significantly more difficult than expected, but yielded adequate results. The rear-seat support frame has mounting bosses that were be re—purposed for additional bracketry. So that was the plan.

The fixturing bosses are M8x1.0.



This is what the supporting structure (in general) looks like.

This is a detail of the support bracketing beneath the underseat closeoff panel.

I was concerned about the M6x1.0 standoffs being so I put nut-serts/riv-nuts where the standoffs terminated in the new support

Sponsored

 

[devdrone6]

Good outside the triangle thinking there

 

[Limes2]

I like that the support brackets are triangles too. Keeps the Cyber design going.

 

[AverageJoe]

Thats a clean mod you made. Looks oem.

 

[hemiarch]

Beautifully done. Outstanding work.

 

[84Apollo3]

Love it. Where are you located?

 

[hemiarch]

That looks like a good place to hang a fire extinguisher and maybe a glass tool.

 

[REM]

phenomenal work!

 

[REM]

That looks like a good place to hang a fire extinguisher and maybe a glass tool.

since we have an up-armored truck, I keep this in my underseat storage for emergency egress. I'm not asking my truck permission to exit, I'm informing it of a guarantee:

 

[devdrone6]

since we have an unarmored truck, I keep this in my underseat storage for emergency egress. I'm not asking my truck permission to exit, I'm informing it of guarantee:

Link to that please!

 

[REM]

Link to that please!

Please yeet responsibly.

 

[hemiarch]

Link to that please!

@REM recs are very solid. That said, here is a good thread on some of these extrication tools.
https://www.cybertruckownersclub.co...escape-tool-what-are-the-options.46984/page-5
@REM, maybe you could post that in there to make it easier for others to find it down the road?

 

[hemiarch]

Inspired by DIY others on this site, I decided I wanted underseat 2nd row storage for a IFAK and other travel necessities (air pillows /lightweight blanket).

Solution was underseat molle/pals panels:

The storage is convenient, doesn’t take up floor space, and is close at hand.

I used cheap hook&loop straps through the molle/pals panels to ensure the IFAK was grab/go in an emergency.

The project was significantly more difficult than expected, but yielded adequate results. The rear-seat support frame has mounting bosses that were be re—purposed for additional bracketry. So that was the plan.

The fixturing bosses are M8x1.0.



This is what the supporting structure (in general) looks like.

This is a detail of the support bracketing beneath the underseat closeoff panel.

I was concerned about the M6x1.0 standoffs being so I put nut-serts/riv-nuts where the standoffs terminated in the new support

I can see this being enormously useful when the seats are in the lifted position. You can duffel bag or crate the floor and still have all that hanging room.

Sponsored