How to remove Cybertruck sun visor?

[Brandon McNees]

I’ve found my myself driving around with the visors retracted or put against the side doors of the vehicle to simulate more of an model X experience when driving the cyber truck. Does anybody know or has anybody removed the cyber truck visors? If so, do you have pictures from the removal?

Sponsored

 

[sybertruck]

Here is the procedure: https://service.tesla.com/docs/Cybe... connector, remove the bolts (x2) that attach

 

[Sandman1962]

I posted a 3d file you might be interested in. Here’s the thread

https://www.cybertruckownersclub.co...isor-clip-to-secure-visors-to-the-side.32099/

 

[Brandon McNees]

I posted a 3d file you might be interested in. Here’s the thread

https://www.cybertruckownersclub.co...isor-clip-to-secure-visors-to-the-side.32099/

Are you selling these online? Do you still use PETG?

 

[PhillyCyberT]

I’ve found my myself driving around with the visors retracted or put against the side doors of the vehicle to simulate more of an model X experience when driving the cyber truck. Does anybody know or has anybody removed the cyber truck visors? If so, do you have pictures from the removal?

Funny I do that against the door every time on both sides. Was looking for that procedure too. Just wondering if the lightbar will spoil all the view in the upper portion of the windshield. Don't want to look at the underside of the lightbar.

 

[Brandon McNees]

Funny I do that against the door every time on both sides. Was looking for that procedure too. Just wondering if the lightbar will spoil all the view in the upper portion of the windshield. Don't want to look at the underside of the lightbar.

Does anyone have any pictures of the inside view through the windshield of the OEM light-bar installed?

 

[Sandman1962]

Are you selling these online? Do you still use PETG?

If you know someone who can do 3D prints, they are easy to print. I can print them and send them to you if you’d like. I’ve probably done this a whopping 7 times or so. I now print them in PETG-carbon fiber so it should stronger and more heat resistant. I charge $15 and USPS priority is $10.65(as of a couple weeks ago). You can DM me if you’re interested. I happen to have a couple sets already printed.

 

[PhillyCyberT]

Does anyone have any pictures of the inside view through the windshield of the OEM light-bar installed?

Just looked - no way you can see it. Light bar will be sitting higher so won't be visible. Good news

 

[Dekeman]

If you know someone who can do 3D prints, they are easy to print. I can print them and send them to you if you’d like. I’ve probably done this a whopping 7 times or so. I now print them in PETG-carbon fiber so it should stronger and more heat resistant. I charge $15 and USPS priority is $10.65(as of a couple weeks ago). You can DM me if you’re interested. I happen to have a couple sets already printed.

Just DMd you, thx!

Sponsored