DIY PPF in Deep Gloss Black + 30% tint on DRL LED + Cyberbeast graffiti on tailgate under PPF

[dicataldo]

I purchased the whole roll (60" x 54 ft). Was more difficult than I first thought but after some learning curve I feel confidence now to do it again if needed. I had to redo 5 panels ( 2 doors, 2 front fenders and 1 rear fender) and still have plenty material left. Spent 1370 dollars and some time but I tried to enjoy the process. Happy with the end result. If I have to start all over I would probably go with the precut option. Would be much much easier but you can't miss since you will get just the needed material to do it.

Sponsored

 

[fishtek]

Looks damn good, I'd say you did well!

 

[panthar]

Which brand roll did you buy. I did exactly similar but with Vinyl ...

 

[UberNoob]

You have a link? This is what I’d like to do however with the brightest white I can find.

 

[EVBASE]

So cool !

 

[dicataldo]

Which brand roll did you buy. I did exactly similar but with Vinyl ...

gswf ppf deep black gloss. Looks good your vinyl. Most installer don't want to do vinyl because they say it doesn't last long but looks really good ! Congrats

 

[panthar]

You have a link? This is what I’d like to do however with the brightest white I can find.

You want then piano white ,

 

[Model3Guy]

gswf ppf deep black gloss. Looks good your vinyl. Most installer don't want to do vinyl because they say it doesn't last long but looks really good ! Congrats

You can always do a clear PPF over your wrap. Has already been posted on here a while ago.

 

[Cybertruck Dude]

I purchased the whole roll (60" x 54 ft). Was more difficult than I first thought but after some learning curve I feel confidence now to do it again if needed. I had to redo 5 panels ( 2 doors, 2 front fenders and 1 rear fender) and still have plenty material left. Spent 1370 dollars and some time but I tried to enjoy the process. Happy with the end result. If I have to start all over I would probably go with the precut option. Would be much much easier but you can't miss since you will get just the needed material to do it.

If you bought the whole roll how did you get the beast emblem on there and the foundation series emblem?

 

[tmclaugh]

It looks fantastic!

I just finished mine last weekend. I bought HOHO Film PPF from Amazon ($550 for 50ft). I've never done it before and didn't want to waste a lot of money on materials if it didn't work out. I used a roll of brown paper and a piece of chalk to template all of the panels and then pre-cut PPF from the roll before I started. I still had to trim a little after it was on, but I think this process made it much easier. I did gloss black on the front and back and clear gloss on the sides. I wanted to keep some of the stainless steel look, but if I do it again I will probably go all black.

 

[dicataldo]

If you bought the whole roll how did you get the beast emblem on there and the foundation series emblem?

amazon or ebay. Also Tesbros and tsportline sale it online. They sale decals on any color you want

 

[dicataldo]

It looks fantastic!

I just finished mine last weekend. I bought HOHO Film PPF from Amazon ($550 for 50ft). I've never done it before and didn't want to waste a lot of money on materials if it didn't work out. I used a roll of brown paper and a piece of chalk to template all of the panels and then pre-cut PPF from the roll before I started. I still had to trim a little after it was on, but I think this process made it much easier. I did gloss black on the front and back and clear gloss on the sides. I wanted to keep some of the stainless steel look, but if I do it again I will probably go all black.

Nice job!! I did the same. Used a paper template to cut the panel and then trim it once installed. Waited overnight to do the edges.

 

[easytravelman]

I purchased the whole roll (60" x 54 ft). Was more difficult than I first thought but after some learning curve I feel confidence now to do it again if needed. I had to redo 5 panels ( 2 doors, 2 front fenders and 1 rear fender) and still have plenty material left. Spent 1370 dollars and some time but I tried to enjoy the process. Happy with the end result. If I have to start all over I would probably go with the precut option. Would be much much easier but you can't miss since you will get just the needed material to do it.

Heck of a job. I am impressed.

Sponsored