Nitto Recon A/T 295/45/24 tires squeaking / rubbing sound at full turn lock?

[BlRazytruck]

My tires are making a squeaking noise when I fully turn the wheel. I know a lot of people have these tires for their CT wheel builds, so I don’t know whats going on. Any ideas? Should I take it back to the guys who installed them? Any help is appreciated. A bit of a car newb here. Please keep trolling to a minimum.

Sponsored

 

[BlRazytruck]

SOS

 

[BlRazytruck]

Here is the build. SOS

 

[kpanda17]

Here is the build. SOS

makes no sense with a good mechanic

Something must be loose from damage, wheels swapped or the alignment done wrong
you must still have the wheel and tire setup from delivery, swap them back on
See if it clears the squeak
If no, something was damaged in the work
If yes, then something is wrong with the new set
Should be an easy fix

 

[Feartoy]

Squeek? Only turning ? Take a look see if it's the tires RUBBING the plastic fender liner. Cut the wheel all the way and get out and look say the 3 and 9 o'clock. That would be my guess..

 

[igs]

295 don't fit.

 

[BlRazytruck]

I think this is the issue. What would be the fix?

 

[BlRazytruck]

295 don't fit.

A lot of people use the 295. All of the TSportline 24 builds comes with this tire. Why do you say it doesn’t fit?

Squeek? Only turning ? Take a look see if it's the tires RUBBING the plastic fender liner. Cut the wheel all the way and get out and look say the 3 and 9 o'clock. That would be my guess..

How do I fix it?

 

[Tatiana_Tsportline]

I think this is the issue. What would be the fix?

First step in resolving a noise issue is figuring out what's causing the noise. The advise above to check for any rubbing of the tire on the fender liner or other components in that fender well when the wheel is fully locked first to the left, then fully locked to the right is the first step. You may need a friend to do the wheel turning while you look at the wheel/fender.

 

[BlRazytruck]

First step in resolving a noise issue is figuring out what's causing the noise. The advise above to check for any rubbing of the tire on the fender liner or other components in that fender well when the wheel is fully locked first to the left, then fully locked to the right is the first step. You may need a friend to do the wheel turning while you look at the wheel/fender.

Thank you. I will update when the truck is back from its wrap appointment.

 

[igs]

A lot of people use the 295. All of the TSportline 24 builds comes with this tire. Why do you say it doesn’t fit?

Do your wheels have the same offset as TSportlines?

 

[BlRazytruck]

First step in resolving a noise issue is figuring out what's causing the noise. The advise above to check for any rubbing of the tire on the fender liner or other components in that fender well when the wheel is fully locked first to the left, then fully locked to the right is the first step. You may need a friend to do the wheel turning while you look at the wheel/fender.

Do your wheels have the same offset as TSportlines?

I could not find the information about the offset of the CT7 TSportline build on their website. I assume maybe that is the issue my offset is 25.

 

[BlRazytruck]

First step in resolving a noise issue is figuring out what's causing the noise. The advise above to check for any rubbing of the tire on the fender liner or other components in that fender well when the wheel is fully locked first to the left, then fully locked to the right is the first step. You may need a friend to do the wheel turning while you look at the wheel/fender.

Tatiana could you let us know the offset you guys use for your 24 inch CT7 with the Nitto Recon 295/45/24

Sponsored