Who else is still stuck on 2024.26.300.1 ?

[tmac777]

I got my update today as well. But unfortunately I am out of town for work while my truck is at home, so it’ll be another week before I can give it a try.

Sponsored

 

[Cybertruck Tampa]

App says an update is waiting, but it says it’s the same software it is already running. I’m sure and hope it’s just a glitch.

I can’t download anyway since I’m not home at the moment since we evacuated for Mr Milton.

 

[CybertruckCovers]

My Cybertruck finally updated to 2024.32.20.1 tonight. I just tested FSD around Las Vegas while traffic was light tonight. It worked very well and only made one intervention due to some jerk who made an abrupt, illegal turn in front of me.

 

[xbeast]

I was. Just got the update.

 

[Woodrick]

My Cybertruck finally updated to 2024.32.20.1 tonight. I just tested FSD around Las Vegas while traffic was light tonight. It worked very well and only made one intervention due to some jerk who made an abrupt, illegal turn in front of me.

FSD probably would have handled it correctly.

But if you are new to FSD it is better to be safe than sorry.

 

[CybertruckCovers]

FSD probably would have handled it correctly.

But if you are new to FSD it is better to be safe than sorry.

I doubt a collision would have occurred, but FSD should have applied the brakes when the car made the left turn in front of us. It was dangerously close, so I had to apply the brakes instead.

 

[Woodrick]

I doubt a collision would have occurred, but FSD should have applied the brakes when the car made the left turn in front of us. It was dangerously close, so I had to apply the brakes instead.

That's all a matter of opinion. We had a similar one just the other day and my wife and I mentioned how far long FSD had come handling cars crossing in front of you.
In the past, if the car crossed 100 yards away, the car would think that it needs to come to a stop.
This one was probably less than 100 ft and it drove just as I would.
It calculated the trajectories of both vehicles and decided that a collision wasn't imminent.
Many times I've seen it slow for the same situation.

 

[Cybertruck Tampa]

Downloaded everything Friday night. Now running the latest software. Impressed with FSD, but obviously needs some work. Still very impressive and if you say otherwise you’re lying to yourself. Especially when it’s not geo fenced with a bunch of different 3rd equipment mounted on the exterior of a car.

 

[DJAlan2000]

WE HAVE BEEN UPDATED!! Woo hoo!! no more 300.1...

Now have FSD and it's working... well, okay... But it sure likes to drive ON the left 'lines' in the road a lot and that's NOT a good thing... Especially when there's a construction area (like the 101 freeway in Santa Barbara!!) where they have those concrete barriers right next to the 'yellow line'...

FSD works fine in my model y, and handles going through there with no issues... But the CT wants to ride those lines too often and I can't trust it... Which really sucks as I WANT to use it...

It also won't keep the proper speed... Keeps slowing down... I set the speed for, say, 70 mph and within a couple of minutes it's down to 67... then 65... then even goes down to 60 and below...

I try the scroll wheel (which increases speed in my MYLR immediately!) and all it does is show the higher 'limit'... But the CT maintains the same speed (well, with the slowing as well) and the only way to increase speed is to hit the "E" pedal and take it up to my set 'limit'...

Other than that, the rest of the software appears to be working normally... so far...

Sponsored