The best phone mount that charges as well?

[3cyberbeast]

I’m searching for a phone mount that attaches near the upper left side of the Cybertruck screen. My current mount (see attached photos) works and allows both vertical and horizontal viewing on my iPhone, but it doesn’t charge. I have an older phone that needs constant charging while driving, or the battery dies by the end of the day. I’d prefer a clean, installation that doesn’t require major modifications to the truck and looks as close to OEM as possible. Can someone share a photo of a high-quality phone charging mount for the Cybertruck that fits near the upper left screen, supports landscape mode, and blends seamlessly with the interior? I’ve checked existing posts but haven’t found one that fully meets my needs. Given the time since the Cybertruck’s release, I’d expect top-tier options to be available now.

Sponsored

 

[seussiii]

I know its not what you asked for but I just installed a magsafe charger/mount after diving into the options. Reason I decided on the left pillar was it appeared to have a lot more clearance and spacing compared to being by the screen/yoke. Works well, tilts all around, and can spin it 360.

It's also bolted right on to the frame practically so its pretty solid.

https://tsportline.com/collections/...mount-wireless-charger?variant=50000017228065

 

[Shadowmite]

I know its not what you asked for but I just installed a magsafe charger/mount after diving into the options. Reason I decided on the left pillar was it appeared to have a lot more clearance and spacing compared to being by the screen/yoke. Works well, tilts all around, and can spin it 360.

It's also bolted right on to the frame practically so its pretty solid.

https://tsportline.com/collections/...mount-wireless-charger?variant=50000017228065

I too went with this one; it rocks. The area between the squircle and the screen is lacking for anything else and it's just annoying.

 

[smcnaughton829]

I also have that mount. It works great.

 

[TWRAPS]

This:
https://twraps.com/products/dashboard-phone-mount-for-tesla-cybertruck

0 disassembly 0 adhesives ?

 

[hemiarch]

https://magbak.com/products/phone-m...NCMTnoLa5kvzAy9W0N4YHE&variant=42054672711761
Hands down my favorite after trying several. Have a left and right sided version on both the passenger and driver side.
It’s beauty is its simplicity. No moving parts, magnets, adjusters etc.

 

[Vigorous1982]

I know its not what you asked for but I just installed a magsafe charger/mount after diving into the options. Reason I decided on the left pillar was it appeared to have a lot more clearance and spacing compared to being by the screen/yoke. Works well, tilts all around, and can spin it 360.

It's also bolted right on to the frame practically so its pretty solid.

https://tsportline.com/collections/...mount-wireless-charger?variant=50000017228065

I agree fully with you. This is by far the best CT phone mount. Period!

 

[jesseasi]

https://magbak.com/products/phone-m...NCMTnoLa5kvzAy9W0N4YHE&variant=42054672711761
Hands down my favorite after trying several. Have a left and right sided version on both the passenger and driver side.
It’s beauty is its simplicity. No moving parts, magnets, adjusters etc.

Agree 100%. Plus I can use my phone while using FSD and I don't get all the warnings to pay attention!

 

[Nidavellir]

I have been using the MagBak. It has been great and works great
MAGBAK

 

[TESLouwhoA]

Concur that best mount and fast charging is https://tsportline.com/collections/...mount-wireless-charger?variant=50000017228065

 

[Freeseframe]

I used MagBak after I received my CT in 2024 but in the summer heat it fell off and broke. Warranty replacement sent but that one too suffered the same fate after a few weeks. The first versions for the CT was a retrofit 3/Y holder with what appeared to be a 3D printed insert to fit the CT screen profile and that was where the adhesive failure was. Maybe it's been improved since last May but I'd stay away from them.

I moved onto Jowua and while I was hesitant at first with their "sticky suction cup" method it has been flawless for 9 months now. Would recommend.

 

[hemiarch]

I used MagBak after I received my CT in 2024 but in the summer heat it fell off and broke. Warranty replacement sent but that one too suffered the same fate after a few weeks. The first versions for the CT was a retrofit 3/Y holder with what appeared to be a 3D printed insert to fit the CT screen profile and that was where the adhesive failure was. Maybe it's been improved since last May but I'd stay away from them.

I moved onto Jowua and while I was hesitant at first with their "sticky suction cup" method it has been flawless for 9 months now. Would recommend.

I live in Arizona and familiar with this problem. Happens to every piece of VHB.
Solution: I put a little thin layer of 3m adhesive promoter on the back corner of the screen before sticking in the magbak. Never happened. Have had it in our x for more than three summers. Never a problem.

 

[bentoncalder]

This was a great find IMO. Good price, has MagSafe for iPhone, has wireless charging, has a great installation process, and fits with the CT aesthetic imo.

ESR for 15W MagSafe Car Mount... https://www.amazon.ca/dp/B0CB5XL6DM?ref=ppx_pop_mob_ap_share

 

[Nidavellir]

This is also a great option
Cybertruck Adjustable MagSafe

 

[hemiarch]

This is also a great option
Cybertruck Adjustable MagSafe

Haven’t seen that before. Like that one and the jowua too.

Sponsored