$59k Base Dual-Motor AWD Cybertruck Begin Delivery!

[GN1]

The json section where the date was previously stated is now blank, not 2027

Oh would it actually show 2027 on there?
I couldn't figure out how to get to JSON on browser, gets stuck on "verified successfully".
Right now Tesla chatbot shows 2027 again.

Sponsored

 

[Solar2026]

My status app updated today and dropped the delivery window information. Yesterday vs today

It happened to me, the "window" section disappeared, then the next day, the window appeared and the delivery dates move up about one month.

 

[antiman]

My phone app shows this but my laptop app hasn’t gotten to vin yet, Tesla app hasn’t gotten to vin either, found that odd

 

[mahdir35]

Out running some errands and had to look back and take a second peek. Who else is guilty?

All the time brother… sept 24 was my delivery date and I still catch myself doing it every other day or so! It’s the “hardest” vehicle design I have ever laid eyes on & it never gets old

 

[CT_TX]

Quick update.

Got it wrapped in “Stealth black” got a great deal on the labor from a buddy who does PPF for some of the big DFW dealerships.

I ordered the TWRAPS DIY kit with a code.

He charged me labor only, and tinted it.

Said the material didn’t feel as tacky as Xpel, so the edges were tougher to stick - but I’m very happy with the end product and the cost!

When I compare what Tesla was charging, what I paid for the DIY and the labor - it was half the cost! If you’re in the DFW area feel free to reach out to him and let him know I referred to get a good deal! He can do the entire wrap or you can bring a DIY kit. He also does just tinting too.

Leo
(940) 395-4303

 

[TarheelCT]

Quick update.

Got it wrapped in “Stealth black” got a great deal on the labor from a buddy who does PPF for some of the big DFW dealerships.

I ordered the TWRAPS DIY kit with a code.

He charged me labor only, and tinted it.

Said the material didn’t feel as tacky as Xpel, so the edges were tougher to stick - but I’m very happy with the end product and the cost!

When I compare what Tesla was charging, what I paid for the DIY and the labor - it was half the cost! If you’re in the DFW area feel free to reach out to him and let him know I referred to get a good deal! He can do the entire wrap or you can bring a DIY kit. He also does just tinting too.

Leo
(940) 395-4303

Looks great. I have a July date for PPF but It pains me to pay what there charging.

 

[undersky]

@TarheelCT check dm

 

[dexterdcbt]

Delivery window back to 2027 for me today as well. Was saying August. Ordered morning of 2/21

 

[CT_TX]

Looks great. I have a July date for PPF but It pains me to pay what there charging.

Agreed, which is why I was going to just DIY it - but for less than half the price with a tint - I couldn’t pass it up! I’d seen his work on Porsche’s and other high end cars so I went for it! after 2 weeks of cleaning smudges off the stainless I had to wrap it!

Choosing color was the hardest part

 

[TarheelCT]

Agreed, which is why I was going to just DIY it - but for less than half the price with a tint - I couldn’t pass it up! I’d seen his work on Porsche’s and other high end cars so I went for it! after 2 weeks of cleaning smudges off the stainless I had to wrap it!

Choosing color was the hardest part

Agree. Color choice is the worst part.

 

[comet2]

Agree. Color choice is the worst part.

@TarheelCT so what color did you end up with?
So far the fingerprints don’t seem to bother me a lot (lol, yes it does ). Well, not enough to get a $4000 wrap.
These are the ones I picked from @TWRAPS
1. Matte Mysterious Green
2. Matte Liquid Shadow Gold
3.Satin Meteorite Gray
4. Stealth Black
5. Matte Ghost Metallic Dark Green

Once the finger prints start to bother me, I might get a piece and try a DIY. Depending on how that goes, I might decide to do it all.

 

[comet2]

Agreed, which is why I was going to just DIY it - but for less than half the price with a tint - I couldn’t pass it up! I’d seen his work on Porsche’s and other high end cars so I went for it! after 2 weeks of cleaning smudges off the stainless I had to wrap it!

Choosing color was the hardest part

Can’t go wrong with black.

 

[comet2]

@TarheelCT so what color did you end up with?
So far the fingerprints don’t seem to bother me a lot (lol, yes it does ). Well, not enough to get a $4000 wrap.
These are the ones I picked from @TWRAPS
1. Matte Mysterious Green
2. Matte Liquid Shadow Gold
3.Satin Meteorite Gray
4. Stealth Black
5. Matte Ghost Metallic Dark Green

Once the finger prints start to bother me, I might get a piece and try a DIY. Depending on how that goes, I might decide to do it all.

Maybe take a week off and go to @TWRAPS for a hands on tutorial.

 

[TarheelCT]

@TarheelCT so what color did you end up with?
So far the fingerprints don’t seem to bother me a lot (lol, yes it does ). Well, not enough to get a $4000 wrap.
These are the ones I picked from @TWRAPS
1. Matte Mysterious Green
2. Matte Liquid Shadow Gold
3.Satin Meteorite Gray
4. Stealth Black
5. Matte Ghost Metallic Dark Green

Once the finger prints start to bother me, I might get a piece and try a DIY. Depending on how that goes, I might decide to do it all.

I’ve got two cans of spray away on each side of the garage to hit those fingerprints.

 

[Zeus_Herkeios]

Quick update.

Got it wrapped in “Stealth black” got a great deal on the labor from a buddy who does PPF for some of the big DFW dealerships.

I ordered the TWRAPS DIY kit with a code.

He charged me labor only, and tinted it.

Said the material didn’t feel as tacky as Xpel, so the edges were tougher to stick - but I’m very happy with the end product and the cost!

When I compare what Tesla was charging, what I paid for the DIY and the labor - it was half the cost! If you’re in the DFW area feel free to reach out to him and let him know I referred to get a good deal! He can do the entire wrap or you can bring a DIY kit. He also does just tinting too.

Leo
(940) 395-4303

Thanks for this info. I am going to ask your buddy's help when it's time to wrap mine(don't have the truck yet).

when i enquired at a local Turbo Tint(Austin) yesterday, they quoted me $6500

Sponsored