Daily random Cybertruck photos thread - Post Yours! 📸 🤳

[hemiarch]

I love the frunk for it's ease of access and ergonomics and it's use varies a lot depending upon what's already in the bed, the cabin and the frunk. On road-trips, it's where my primary cooler is, off-road there is usually a chainsaw and a rope puller in there. If my bed is empty, I'm more likely to use the frunk since I don't need to secure things in there, it's easier to fill up enough that stuff won't shift around. Of course if the bed is getting full I'll use the frunk for more easy to access stuff so I don't have to move stuff around in the bed. When woodcutting I keep two chainsaws and assorted gear in there (and on the floor of the back seat) so my bed is ready to accept firewood. When doing a big grocery run I usually put the full bags in the frunk, sometimes along with a cooler for meat and dairy. The frunk is also a good place to put some tool bags without securing them, if I need an assortment of tools away from home. It's amazing how much it will hold vs. how much it looks like it will hold. I've become really good at knowing what kinds of bulky items will fit and which ones are too tall or too wide for the lid to close.

A man after my own heart. Crab season is almost upon us and we will be Washington bound in short order. Want to hang out this year?

Sponsored

 

[CyberWalrus]

How did the get suspension that low?

 

[Outdoors]

How did the get suspension that low?

Assuming since it is at a show it is either lowered, or one went into the service menu and deflated the bags to nothing to slam it.

 

[CyberWalrus]

Assuming since it is at a show it is either lowered, or one went into the service menu and deflated the bags to nothing to slam it.

Can you set the lower height for entry mode for even easier entry?

 

[Outdoors]

Can you set the lower height for entry mode for even easier entry?

If one would lower the truck I would believe that to lower the lowest point. Yet not my direct knowledge. @CYBERTRUCKco would know.

 

[RayzorBEV]

Eat, bake, charge, repeat

 

[RonSol]

Happy 4th

 

[Oden's Beast]

Happy Fourth of July everyone!

250

 

[Kryptek]

Big Bear Lake to Tesla Diner run. 110 miles that took over 3 hours to complete due to crazy Friday afternoon traffic and lots of accidents. FSD was sublime going through all the twisty up and down from Big Bear lake. I actually fell for a moment from being tossed around under Mad Max Mode. Standard Mode was much calmer through these twisty.

Used to live in big bear! it took me a long time to acclimate where I could run a mile without dying haha any draw backs for ev at altitude?

 

[Outdoors]

Doing 50 on 250 .

 

[RayzorBEV]

Happy 4th of July to everyone from Starbase, TX

 

[RayzorBEV]

"any draw backs for ev at altitude?"
-Zero that I can see! In fact, the Cyberbeast was truly in her element. With more than 6000ft of elevation gains and non stop twisty, all them instant torque, 4 wheel steering plus full active air suspension really came in handy

 

[TorqMonstr]

Oasis!

 

[Loudness]

Happy Independence Day! Wooo, 250!

The most American-made truck in the world is a perfect way to celebrate.

 

[RonSol]

.

Sponsored