Introducing T Sportline CTX Extreme Duty Front Bumper with Integrated Winch (High-Output) & Lighting

[sefar]

dig this, and the price point as well. I won't ever need a winch but the lighting option is pretty amazing. Well done.

Sponsored

 

[T Sportline]

dig this, and the price point as well. I won't ever need a winch but the lighting option is pretty amazing. Well done.

thank you, glad to hear it!

 

[060Sub2]

Looks interesting. I'd like to see pics/analysis that show departure angle not reduced.

Also, how fast/easy it is to remove the battery pack from frunk? Would like to see picks with power unit in place and then removed (leaving behind whatever mount plates/etc for fast re-install). The question is: can I quickly/easily pop out the battery via quick release and reclaim full frunk space?

I also echo some comments above in terms of the rest of the modular system. Even if not released yet, some conceptual drawings of what else is to come would be helpful before committing to "the system." I'd like to see, in addition to front bumper, real rock rails that do not reduce clearance (and allow access to jack points) and a rear bumper system that allows external mounting of a full-sized spare.

Thanks for your efforts!

 

[T Sportline]

Looks interesting. I'd like to see pics/analysis that show departure angle not reduced.

Also, how fast/easy it is to remove the battery pack from frunk? Would like to see picks with power unit in place and then removed (leaving behind whatever mount plates/etc for fast re-install). The question is: can I quickly/easily pop out the battery via quick release and reclaim full frunk space?

I also echo some comments above in terms of the rest of the modular system. Even if not released yet, some conceptual drawings of what else is to come would be helpful before committing to "the system." I'd like to see, in addition to front bumper, real rock rails that do not reduce clearance (and allow access to jack points) and a rear bumper system that allows external mounting of a full-sized spare.

Thanks for your efforts!

Our aux power system box simply bolts down in the frunk using the factory tub insert bolts. Super clean, easy. Wires rout through the frunk tub liner - two options, drill a 3/4" hole in the plastic -- or remove the Cybertruck center plastic cover and run wires through the filter access spot and leave the plastic cover off.

This is a pic of our pre-production test mule unit, but production will be basically the same -we are getting more professional photos and will update listing asap!

 

[MICyber]

With the center lights installed it looks like the Frunk access button is obstructed.

 

[MICyber]

On second look, the fender flares don't look stock. What gives?

 

[Jacob]

I LOVE it TSportline! Now, is there an option to upgrade the winch to fire a pneumatically actuated grappling hook? That is what I REALLY need.

 

[T Sportline]

With the center lights installed it looks like the Frunk access button is obstructed.

It's accessible

 

[T Sportline]

On second look, the fender flares don't look stock. What gives?

More new products, sneak peak - we'll announce those soon

 

[T Sportline]

I LOVE it TSportline! Now, is there an option to upgrade the winch to fire a pneumatically actuated grappling hook? That is what I REALLY need.

I like the way you think! I have ideas about making something not far from that!

 

[cardad]

Lol, haters gonna hate! Come on over and we'll go have fun - happy to show you how to use a hi-lift jack ?

You can bring your test mule to Moab. I’ll trade you a stay at my rental with free L2 charging for a bumper and we’ll see what it can do. Maybe if you didn’t show the mall crawler Lambo wheels in the pic the idea of this thing needing a high lift jack or winch for any reason other than driver stupidity would be plausible. Not hating. This is what Super Car Ron’s CT front bumper looks like BTW and you can clearly see the thought that went into keeping it high with the winch mounted on top. Those are also 35x12.5 20s so at a minimum more sidewall than what you have shown. Critiquing the stupidity of mall crawlers isn’t hating. It’s just a genuine desire for products that make sense.

 

[T Sportline]

You can bring your test mule to Moab. I’ll trade you a stay at my rental with free L2 charging for a bumper and we’ll see what it can do. Maybe if you didn’t show the mall crawler Lambo wheels in the pic the idea of this thing needing a high lift jack or winch for any reason other than driver stupidity would be plausible. Not hating. This is what Super Car Ron’s CT front bumper looks like BTW and you can clearly see the thought that went into keeping it high with the winch mounted on top. Those are also 35x12.5 20s so at a minimum more sidewall than what you have shown. Critiquing the stupidity of mall crawlers isn’t hating. It’s just a genuine desire for products that make sense.

I may take you up on Moab, for real - easier to get a bumper there than my Cyber ha ha! Hang tight, we have plenty more "non-mall crawler" content coming, that's just a website product photo, lol - only so much time in the day to get all this stuff up quickly! ha ha

 

[TXCYBRTK]

Hey Cybertruck Nation -

I am excited to announce our new CTX Extreme Bumper for Cybertruck! Our team has been long at work on this and I must say, it turned out amazing! Our produvt and engineering team have invested countless hours spent designing, optimizing, and finalizing this design and the exclusive features. For instance, adding and powering a real 12,000 winch and the ability to outfit with ANY lighting package is no small task!

Beyond the attractive rugged looks, OEM+ design language, meaningful features and benefits....this bumper is properly engineered and manufactured to lead the pack! We are now posted officially for pre-order and plan to start shipping before year end. This is the first of several complimentary / adjacent products in this new CTX lineup from T Sportline.

Our product listing is very detailed, you'll find specs and details about the bumper and available options. The configurator will allow you to mock-up power, winch, and lighting options - dial in a build that suits your needs and budget.

Product page:
https://tsportline.com/products/tes...ront-bumper-with-integrated-high-output-power


Read about it in depth on the product page, here are a few highlight specs:

• Designed with optimized load path integration to Cybertruck
• CAD designed and CNC-Press Bent / Fixture Welded
• 10 Gauge Alloy Steel with Inner Cross-Gusseting
• Integrated Hi-Lift Jack Points
• Retained Cybertruck Camera and Bluetooth Module
• OEM Tow Hook
• Triple coat finish - Phosphated / e-coat / textured black powder coating
• Integrated LED lighting options
• Integrated winch heavy duty mount subframe and add-on winch options
• ~165lbs - Weight (not including winch or power unit)

Finally! A great looking bumper. Ok, I am going to save up for this one. Thanks TS for doing it right!

 

[TexasRaider]

try again now...you'll like the shipping at this point since it's not be programmed to the site yet ?

Can you automate your communication with your customers if an item they ordered is delayed? (I have a current CT item order from July that has been delayed several times, but no communication from T Sportline. I had to manually email customer service to see why I haven’t received my order yet. I believe this could be addressed by a simple email to the affected customers. Right?)

 

[T Sportline]

Can you automate your communication with your customers if an item they ordered is delayed? (I have a current CT item order from July that has been delayed several times, but no communication from T Sportline. I had to manually email customer service to see why I haven’t received my order yet. I believe this could be addressed by a simple email to the affected customers. Right?)

Yes let me see what we can do! Pm me your order so I can personally check for you too.

Sponsored