Search results

I picked these up at Home Depot to clean the inside of the windshield. Works well and reaches all the way to the bottom.

Ordered 12/9 Survey 12/15 Approval 1/10 Delivery 2/15 Contacted by installer 2/19 Second approval email with installer name 2/22 Installation 3/6

@Cybergirl has your install been completed yet?

I have a 150A panel. The Tesla Gateway is connected to the panel with a 125A breaker. The gateway has three backup circuits inside: 60A - Subpanel 30A - Downstairs AC 25A - Upstairs AC

Your truck is attempting to download a firmware update to your wall connector. Let it finish.

Yeah, that’s my second sticker. Goo Gone and a razor blade with a long handle!

Yes, 25 1/2 inches from the wall.

Mine just cleared the garage door.

After the windshield is clean your next challenge is getting the registration sticker in the lower corner.

Service Center told me the Frunk Aero Seal is not yet available.

Here is a link to the wheel center hub caps I used: https://a.co/d/7dseDkK

The caps are vinyl with a snug fit on the lug nuts. You can’t pull them off by hand and need the supplied tool to remove them. 2300 miles and haven’t lost one, but two extra caps came with the set. The caps are longer than the nuts so I needed to trim off the extra material.

$16K

That's what I did. I swapped mobile connectors with my old Model S. Works great.

That's what I thought, but they seemed confused during the process and at the last minute wanted a down payment.

Around 16k. Loan was for $92,500. Also, Navy FCU offers a 90 day lock.

Navy FCU gave me 72 months at 5.94%

They are glossy, but not too bad once they are on the truck. I also had to trim them to size. ColorLugs Vinyl Lug Nut Cover |... https://www.amazon.com/dp/B07CHWGSZZ

Me too! ?‍♂️

I went with vinyl caps. Search for the Amazon links I posted on another thread.