Search results

has anyone had their uiversal wall charger connected to their existing wall battery system/gateway? I have an existing solar array, 2 wall batteries, gateway from Tesla and I was told by Smart Charge America that as long as it's wired to the gateway and Tesla launches software it then will work.

It's perfect for my needs and many others I've built this for. I use the truck for work and need the openess of a rack system and use the awnings for shade and to keep me out of the rain while working. Also yes, when camping I have shade/shelter. The Urander rack system doesn't work for my...

Thanks, No FSD issues at all and no calibration needed. Air shocks I bolted to the central mount location and to the rack itself. Used 100lb shocks.

I'm sure this has been answered but I can't find a good explanation or real world use data. Ok, I have the CT, Tesla Universal Wall connector, 2 wall batteries, Tesla solar, etc so have all the equipment to use power share.....I have the UWC connected to the subpanel from Gateway already but...

I checked your posts and wow, you've had quite a few issues. Sorry to hear. You know, all the times I've been into service the technician quality work was excellent. This last time for the upper trim piece replacement for warranty last month I had done the tech broke my rear door trim and tore...

We've all gone under the knife with warranty and recall issues. Once you get them all done no worries. You'll see.

Here's the camera location and rack system I built. Canopies are about 1/3 extended as I don't have enought room to open all the way. I also have telescoping poles to support the canopies when I put my solar panels on top of them and anchor down in high winds.

Here's the camera location and rack system I built. Canopies are about 1/3 extended as I don't have enought room to open all the way. I also have telescoping poles to support the canopies when I put my solar panels on top of them and anchor down in high winds.

I used the Jackery adapter that is specific to the plugs on back of 2000 Plus Explorers

I love this truck. It's hilarious how good it does and the money I've saved!!

I ran through the originals at 30k. Swapped out for the BFGs K03s and have been great! I've put on 20k miles on these and have only lost 1mm tread. These are guaranteed 55k to 75k miles

Good choices.

I have 8 200w panels from Jackery that I have in 2 carrying cases. Compact, saves space. 2 2000w Jackery Explorer Plus connected together giving me 240v at 38 amp. Great products.

Nice. Thanks and yes for me as well!

That's all good. I use it for work, daily driver. What about you?

Thanks!!

Thanks!!

I built the rack, tire swing. The rack raises level using gas shocks and I built drop down arms to support rack to truck at rear. The rear camera I relocated on top of the rear receiver inside a 2x2 square stock steel mount and works great. Never had an issue with FSD.

I built the rack, tire swing. The rack raises level using gas shocks and I built drop down arms to support rack to truck at rear. The rear camera I relocated on top of the rear receiver inside a 2x2 square stock steel mount and works great. Never had an issue with FSD.

Kammock awnings on all three sides, rear awning folds down so I can carry long loads on rack and the roof rack lowers flat to truck, cause it looks cool, spare tire swing arm, air compressor and a rear water cannon for the tailgators.....or to just wash up are a few things I built.