I would guess there's some issue with the network portion of the computer. Unless you have a very weak signal or your network itself is cycling on/off or low power, more likely an issue with the vehicle. Can you go to a super charger that has wifi, or another persons house, and see if the...
Use the app to schedule preconditioning before heading to charge. Depending on outside temp/battery temp, you may have to allow 15-30 minutes if it's quite cold. If it's already say 70 degrees, you are likely to get no additional help from doing a preconditioning. You can always experiment...
Of course starting from 0 SOC charge would be not the norm, but I was simply pointing out that a 2-3 hour charge to 80% would be far more than 2-3 hours unless starting from maybe 40-50%. Expectations being misrepresented/exaggerated on these threads doesn't help anyone.
I personally don't think having an additional reservoir to have to fill/maintain would be something most would want, nor would Tesla find as an acceptable design. Done right they need to run a water line from the front reservoir to the rear, which would probably be almost a no go as far as...
^^^^^ This. But downloading to phone from the app supposedly removed the file from the usb drive. This according to an AI response from google. If that is true, oh boy. I didn’t know that, expect that to be the case, and I’m sure comes as a surprise to many. Maybe you can undelete from...
I stated that. My issue is WHY you cannot tell the software in networking to ignore (forget) the wifi SSID that is ether non-working (as does ALL PC, IOT, etc.), or you just don't want that connection to remain. The Tesla network software doesn't represent industry norms I guess is what I'm...
I was just at a Tesla super charger that the provided wifi was not routing; it connected as I arrived, but nothing (e.g. music) would succeed. I was surprised there was no way to tell the wifi connection to ignore that (SSID) and use the Cell capability. I needed up having it use my phones...
I know there's a thread on various bottle jacks, but (it) never really states what the required jack height is required in order to be successful if the truck is in MEDIUM height and in jack mode. Would 17 3/8" be enough? 20 ? I'm not keen on putting some sort of base/plate like wood or steel...
Since mine is essentially only an issue with observable wind, I assume the wind is somehow upsetting/sending air into the panel door gap and causing the vibration. I'm going to refine my testing/observation and if that's the case, probably not pursue for now.