Search results

Running 2026.14.6.6 in my CT. I used to be able to use the thumbwheel trim speed. I used to be able to make navigation changes by holding down a Turn Signal Now both are gone. Seems like progress in the WRONG direction

I just went down to 24A charging on my CT. I have a couple of road trips coming up. Does the AC failure portend 48V converter failures and a bricked truck or or folks seeing that the 48V portion of the PCS2 continues to home along? Tnx T3

If you can't remember what station and volume the Entertainment system was at... PLEASE DON`T REMEMBER IT WAS ON!! I am REALLY TIRED of getting back into the truck to a blast of white noise or having the radio tuned to some awful station! T3

The left and right toggle on the righthand thumbwheel changes mode just like the thumbwheel does. If I need to slow down to check a bike path or when I see kids playing down the street I used to trim the speed with the thumbwheel. Now that is gone. Please bring it back. Don't need to...

I agree! Just being able to pull truck forward/back for parking or trailering would be HUGE. The CT will park itself so it would appear that the tech is available. Come on... T3

Twice (maybe at the same intersection) my CT has stopped at a Red light. But it has started to roll thru the intersection a second or two before the light turns green. Complained using the button both times. T3

Thanks for the tip and link to the openevse group. Both quite helpful! Tnx T3

I have PV and Battery from Enphase at my house. The Enphase system has several sets of pilot contacts that can be used for load control. Right now one contact controls a 50A contactor that feeds 240VAC to EVSE. I have a second Tesla and need a second charger. I am wondering if it's...

Beautiful! T3

The CT service manual and wiring harness schematics show a connection thru the roof on the right side for the 48V light bar cable. Looks like it goes into the B pillar and then exits into the cab behind the plastic trim. Might be a path?

My 1/4 wave antennas go tink tink tink as they hit the beams in the parking garage. Don't want to put anything longer on CT. Seems to work fine for both VHF and UHF voice on one side and VHF APRS on the other. T3

If you figure out a way to get in to the cab please post pics and details for all of us! T3

The mounts are just two pieces of al angle. Holes in the bottom piece to match the CT mount and a 3/4in hole for the NMO mount in the top piece. Al angle must be thin or the normal NMO won't mount. The two pieces were then pop riveted together at the correct angle so the antenna ends up...

I think it would be cool if the backup directional controls that are with the Emergency Flasher were active all the time. Selected mode bright and the other 2 dim. Would make a nice backup to the main screen and look really cool. T3

More pictures of my dual NMO mounts and radio.

I haven't figured out how to get in the truck without going thru the doors. Here are my NMO mounts Changed the cable to RG188 (pics show RG58) and snake it thru a gap in trim, then in to back door, tucked into weather seal, under floor mat to radios in a box in the center below console APRS and...

Anyone have any insights on delivery of Tactical Grey vs While or change of wheels? Paid the $1K for the order on May 25,24 Got this Txt from Tesla on June 29 Hello xxxx, this is Tesla regarding your upcoming Cybertruck delivery. The options you selected are not expected to be available until...

Anyone have any insight on putting radio(s) in Frunk and control heads on the center console? Lots of 48V to 12V converters on Ebay etc so power doesn't look like it's a problem Considering trunk lip mounts on Frunk for antennas. Would love insights from folks that have gotten vehicles. I am...

added my info