Footwell Lights that match factory Ambient Lighting with OEM Screen Control

[freyguy]

TLDR: hansshow sent me a full RGB footwell kit that you can control with the actual oem screen interface and it works perfectly. In my opinion this is how the truck should have come from the factory.

Hey everyone,
Wanted to share a quick writeup and my thoughts on the new Hansshow RGB Footwell Ambient Lighting Kit I just finished installing. If you feel like the lower half of the truck is a bit of a black hole at night or you would like to add more ambient color this kit completely changes the interior vibe.

Here is my pros and cons after getting it all wired up:

The Pros
Flawless OEM Integration: This is the biggest selling point. It syncs up beautifully with the Cybertruck's native center screen controls. When you adjust the factory ambient lighting colors or brightness on the display, the footwell lights match it perfectly. It looks completely stock.

Elevates the Interior: It fills out the cabin perfectly and leans heavily into that more premium aesthetic without looking tacky or aftermarket.

Solid Build Quality: The wiring harnesses all plug and play


Now the cons
The Install Process is Involved: This is definitely not a 5-minute plug-and-play job. To get to the factory ambient control module that you need to bridge into, you have to take apart a decent portion of the dash.

Tight Spaces & Clips: Popping factory panels off a new truck is always a bit nerve-wracking, and routing the cables cleanly to the footwells requires some patience.


Final Verdict
Despite the dash teardown being a bit of a project, I am incredibly happy with how this turned out. The seamless screen integration makes the tedious installation totally worth it. If you have a Saturday afternoon and don't mind g with some interior panels, I highly recommend this upgrade.


Let me know if anyone has questions about the wiring or the panel removal process!

Sponsored

 

[That Beast Mode]

I couldn't tell from the video cuz it was very zoomed in, does this plug into the same harness that knocks out your speakers like their digital mirror does or a different one? It looks really good when done and I agree it should have come like that from Tesla. Install looks like a complete pain in the ass tho. @Hansshow Technology and their customer service can still suck a fat one.

 

[freyguy]

I couldn't tell from the video cuz it was very zoomed in, does this plug into the same harness that knocks out your speakers like their digital mirror does or a different one? It looks really good when done and I agree it should have come like that from Tesla. Install looks like a complete pain in the ass tho. @Hansshow Technology and their customer service can still suck a fat one.

no this only taps in to the ambient light controller. You have a plug n play splice. Then you run their new feeds to the locations.

yes it was a complete pain but in fairness to obtain oem screen control of those lights so everything is sync I understand why. The box that feeds the factory ambient lights is in a difficult spot but it’s manageable.

at the end it’s really about wire management. I can give you a link to pdf if you wanna look at that.

 

[freyguy]

Sponsored