PowerShare issue unable to send power to house.

[Riddleric]

Has anyone else run into this issue with Tesla PowerShare?
My Cybertruck won’t send power to the PowerShare system to power my house., once going off grid the truck would attempt to send power then a second later it would disconnect .
The Tesla certified electrician has been out multiple times, verified the installation and wiring, and even confirmed everything with Tesla.
I also took the truck to the Tesla Service Center. They said they don’t have a way to physically test whether the truck is actually sending power. They only ran remote diagnostics and told me everything appears to be working.
I’m still unable to get the system to power the house.
Has anyone experienced the same issue? If so, what ended up being the cause or fix?

Sponsored

 

[Jager]

What fault code(s) are you seeing in conjunction with the problem?

Check Service Mode...

 

[mongo]

Has anyone else run into this issue with Tesla PowerShare?
My Cybertruck won’t send power to the PowerShare system to power my house., once going off grid the truck would attempt to send power then a second later it would disconnect .
The Tesla certified electrician has been out multiple times, verified the installation and wiring, and even confirmed everything with Tesla.
I also took the truck to the Tesla Service Center. They said they don’t have a way to physically test whether the truck is actually sending power. They only ran remote diagnostics and told me everything appears to be working.
I’m still unable to get the system to power the house.
Has anyone experienced the same issue? If so, what ended up being the cause or fix?

There have been Gateways with bad neutral forming transformers. That results in overload or over current faults.

Try turning off all load breakers and activating Powershare.

 

[Riddleric]

What fault code(s) are you seeing in conjunction with the problem?

Check Service Mode...

It showed
Powershare stopped and will
restart if no issues found.

 

[Riddleric]

There have been Gateways with bad neutral forming transformers. That results in overload or over current faults.

Try turning off all load breakers and activating Powershare.

didn’t work, still a click then PowerShare stopped.

 

[Jager]

I'd verify the CT can pull 240v from its bed outlet. Assuming it can, that would suggest a PowerShare issue.

The electrician "certifying" the installation should include actual powering your house from your CT.

Sponsored