Delusional
Well-known member
- First Name
- Phil
- Joined
- Dec 5, 2019
- Threads
- 11
- Messages
- 197
- Reaction score
- 310
- Location
- Pittsburgh
- Vehicles
- F-150
- Occupation
- Construction
When I saw the way he pulled the ramp out at the unveiling, my first thought was "he's gonna smash his fingers on the ground"... and stowing the two sections of ramp away, that looks way too easy way to get your fingers pinched.
I would put a few dollars down on a bet that there will be a motorized solution to deploying the ramp, if only for safety.
I also say that there will be three or four small tabs on the end of the ramp, which allow an inch of air to be between the bottom edge of the ramp, and the ground.
Deploy Ramp and Load Quad, At Unveiling YouTube link.
Another thing that nobody mentions, if any part of that ramp becomes even a little bent out of shape, you won't be able to stow it, which will make your vehicle almost un-drivable.
I would put a few dollars down on a bet that there will be a motorized solution to deploying the ramp, if only for safety.
I also say that there will be three or four small tabs on the end of the ramp, which allow an inch of air to be between the bottom edge of the ramp, and the ground.
Deploy Ramp and Load Quad, At Unveiling YouTube link.
Another thing that nobody mentions, if any part of that ramp becomes even a little bent out of shape, you won't be able to stow it, which will make your vehicle almost un-drivable.
Sponsored