Cybertruck Covers Magnetic Wrap Promo Video

[BeFamousVideo]

We created this fun promo using clips and photos of recent magnetic wraps we've done along to some weird techno music and featuring my very shy wife.

Great share. This is my 1st seeing your wraps. Very cool product and so many applications.

Are these made for other car/truck types or no, cause they fail/fall off?

Sponsored

 

[Hookalakupua]

Easily done! If you have any pictures of exactly what you have in mind, or better yet a link to the actual vinyl product or color you're seeking, we can most likely get an exact match!

We are also trying to get this awesome color in the Farzad youTube video below:

That would be incredible as I’ve been wanting to wrap mine in the same. If you can do this, I’m in! CT has already been done with Everbrite so it’s just waiting!

 

[CybertruckCovers]

Great share. This is my 1st seeing your wraps. Very cool product and so many applications.

Are these made for other car/truck types or no, cause they fail/fall off?

We only offer these for the Cybertruck because its angular design is the perfect blank canvas. Regular cars and trucks have rounded, curved surfaces which would make a near seamless appearance very difficult. Some vehicles, like the F-150 have aluminum body panels, so magnetic wraps wouldn't stick at all.

We are in talks with XPEL Armor to develop a magnetic armor wrap for the Cybertruck. We may offer rolls of XPEL Armor magnetic sheets that can be trimmed to fit any other vehicle with a steel body.

 

[BeFamousVideo]

We only offer these for the Cybertruck because its angular design is the perfect blank canvas. Regular cars and trucks have rounded, curved surfaces which would make a near seamless appearance very difficult. Some vehicles, like the F-150 have aluminum body panels, so magnetic wraps wouldn't stick at all.

We are in talks with XPEL Armor to develop a magnetic armor wrap for the Cybertruck. We may offer rolls of XPEL Armor magnetic sheets that can be trimmed to fit any other vehicle with a steel body.

It's hard to know how thick or malable the product is.
So then the CT works for your product especially well due to the steel composition used on all panels of the CT?

 

[CybertruckCovers]

It's hard to know how thick or malable the product is.
So then the CT works for your product especially well due to the steel composition used on all panels of the CT?

Yes. The stainless steel in the Cybertruck is approximately 70% iron. Most automotive grade steel has a much higher iron content. The average magnetic sheet used for regular cars and trucks is too weak, so we created a higher energy formulation just for the Cybertruck.

 

[TCybertruck]

I’ve seen a video of a Magnet that had been sitting on a CT panel for months, with no issues on the CT once the magnet was removed.

Maybe you should do a Salt Spray on a scrap CT panel with your Wrap and see what happens after a few months?

 

[CybertruckCovers]

I’ve seen a video of a Magnet that had been sitting on a CT panel for months, with no issues on the CT once the magnet was removed.

Maybe you should do a Salt Spray on a scrap CT panel with your Wrap and see what happens after a few months?

These tests were completed several months ago. We mentioned those tests here:

https://www.cybertruckownersclub.co...ps-pre-treatment-solution-test-results.39092/

 

[TCybertruck]

These tests were completed several months ago. We mentioned those tests here:

https://www.cybertruckownersclub.co...ps-pre-treatment-solution-test-results.39092/

Awesome.
How about the backside of the Wrap itself? Is it made from a type of alloy that is prone to corrosion?

 

[CybertruckCovers]

Awesome.
How about the backside of the Wrap itself? Is it made from a type of alloy that is prone to corrosion?

The wrap contains no metal alloy. It’s made of magnetic vinyl which does not corrode.

 

[doggod]

is 32 ounces of the ProtectaClear enough for 2 coats?

 

[CybertruckCovers]

is 32 ounces of the ProtectaClear enough for 2 coats?

Yes. 1 quart should be enough for 2 coats on a Cybertruck.

 

[Hookalakupua]

is 32 ounces of the ProtectaClear enough for 2 coats?

Yes, we easily applied 2 coats and had plenty left over even after touch ups.

 

[doggod]

waiting for garage build to finish. getting quotes now. too much dust blowing in the wind.

 

[Gigahorse]

Yes. 1 quart should be enough for 2 coats on a Cybertruck.

Protectaclear is needed under the install of these?

 

[Gigahorse]

Ok will do.

It is cool they are doing just the frunk protector, let us know how your testing goes.

Sponsored