Magnetic Wrap Early Bird Discount - Only 8 Slots Left! [CybertruckCovers]

[CybertruckCovers]

WHAT THE LITERAL FUCK?

Except cannot find on your web page where to make a custom print version...only various colors...

We haven't set up an interface on the website for that yet. Please email me at [email protected]. You can send us your logos, designs and artwork, and our design team can make a bespoke magnetic wrap for you!

Sponsored

 

[Bridgeboy69]

You can send us your logos, designs and artwork, and our design team can make a bespoke magnetic wrap for you!

So, as you can see my truck currently has a printed vinyl wrap. I am learning that this thing won't last that long as parking lot door scrapes, etc. are inevitable. But I was wondering if your magnetic wrap would still adhere well over top of the vinyl wrap, and I could just switch between the two periodically, and thus extend the life of the vinyl underneath while covered. I realize that I'll have to make 110% sure no sand or dirt is between the two layers or it will cause scatching to the vinyl underneath. But maybe the magetic force will be reduced too much from the extra layer of vinyl?

 

[CybertruckCovers]

So, as you can see my truck currently has a printed vinyl wrap. I am learning that this thing won't last that long as parking lot door scrapes, etc. are inevitable. But I was wondering if your magnetic wrap would still adhere well over top of the vinyl wrap, and I could just switch between the two periodically, and thus extend the life of the vinyl underneath while covered. I realize that I'll have to make 110% sure no sand or dirt is between the two layers or it will cause scatching to the vinyl undernmeath. But maybe the magetic force will be reduced too much from the extra layer of vinyl?

As I posted earlier, we've been investigating the type of magnetic material needed to work best over an existing vinyl wrap or PPF. From what we've seen, it would have to be thicker, heavier magnetic material and most likely be more expensive. It would also have to be a 30 piece kit design because a thicker magnetic wrap would appear too rounded looking over the creases of the Cybertruck body, so separate cuts would have to be made to accommodate that. We will keep everyone posted.

 

[Jacob]

We just exhausted our supply of magnetic materials and are about to produce our next big batch. Pre-order from our next shipment and get a $100 discount on your Magnetic Wrap Kit.
We only have 20 slots left!

Use the link below to get your discount when ordering your magnetic wrap, or use the code EARLYBIRDCTC100 at checkout!

https://cybertruckcovers.com/discount/EARLYBIRDCTC100

Can you do a magnetic wrap with THIS print?

 

[CybertruckCovers]

Can you do a magnetic wrap with THIS print?

Yes. We can even make it textured so you can actually "feel" the rust with your fingertips!

 

[Hammy60]

You fill all your slots yet?

 

[CybertruckCovers]

You fill all your slots yet?

We still have slots left!

 

[GregimusPrime]

Someone in South Florida get this and hit me up. I wanna see one in person before I pull the trigger ...sorry it's my OCD kicking in lol

 

[jimbaum]

Yes. We can even make it textured so you can actually "feel" the rust with your fingertips!

Talking of rust - I read somewhere that the stainless steel of the CT rusts when magnetic decals were applied.
Comments welcome.

 

[CybertruckCovers]

Talking of rust - I read somewhere that the stainless steel of the CT rusts when magnetic decals were applied.
Comments welcome.

That’s an old one! We solved that problem months ago. See our many previous posts.

 

[Mystery.Shadow]

"Magnetic wraps must be removed for regular cleaning, especially after exposure to water or salt. Avoid any prolonged use without removal unless you have pre-treated the steel."

Does this include normal, everyday, boring rain??

 

[CybertruckCovers]

"Magnetic wraps must be removed for regular cleaning, especially after exposure to water or salt. Avoid any prolonged use without removal unless you have pre-treated the steel."

Does this include normal, everyday, boring rain??

Rain by itself is generally not a problem unless there is salt or iron particles present between the magnetic surface and stainless steel. Simply clean, prep and passivate the stainless surface with an iron remover like IronX and/or apply a double coat of ProtectaClear before applying the magnetic wrap.

Taking these steps will prevent discoloration and white surface contamination spots, often mistaken for rust, even if you leave the wrap on for months or longer.

We’ve also found that the dreaded, perceived “rust” is easily removed without buffing and polishing (such as resorting to use of an orbital sander or abrasives like Bar Keepers Friend) by simply using an iron removal solvent like IronOut. We even made a brief video of it here:

 

[CybertruckCovers]

So, as you can see my truck currently has a printed vinyl wrap. I am learning that this thing won't last that long as parking lot door scrapes, etc. are inevitable. But I was wondering if your magnetic wrap would still adhere well over top of the vinyl wrap, and I could just switch between the two periodically, and thus extend the life of the vinyl underneath while covered. I realize that I'll have to make 110% sure no sand or dirt is between the two layers or it will cause scatching to the vinyl underneath. But maybe the magetic force will be reduced too much from the extra layer of vinyl?

Our wraps have now been tested over an existing wrap vinyl at 80 MPH so far with out any trouble. See thread below:

https://www.cybertruckownersclub.co...r-existing-vinyl-wrap-cybertruckcovers.47252/

 

[CybertruckCovers]

Just to let everyone know...

You can still pre-order a Magnetic Wrap kit and get a $100 discount!

We only have 8 slots left, so time is running out!

Use the link below to get your discount when ordering your magnetic wrap, or use the code EARLYBIRDCTC100 at checkout!

https://cybertruckcovers.com/discount/EARLYBIRDCTC100

 

[RayzorBEV]

We just exhausted our supply of magnetic materials and are about to produce our next big batch. Pre-order from our next shipment and get a $100 discount on your Magnetic Wrap Kit.
We only have 8 slots left! Time is running out!

Use the link below to get your discount when ordering your magnetic wrap, or use the code EARLYBIRDCTC100 at checkout!

https://cybertruckcovers.com/discount/EARLYBIRDCTC100

Can we start pre-ordering the color-shift wrap or only what's available? Thanks!

Sponsored