Cybertruck's Ultimate Companion: Urander Rack & PANO Tent

[Urander]

Sponsored

 

[mjezzi]

The quick deploy and having the tent fully black out are two very amazing features I wish I had that I don’t have with my cybertent.

 

[SeasonedTech]

@Urander’s rack is easy to remove off the truck as one whole unit. Just remove the 8 bolts and with a few strong humans or a simple $150 lift - comes right off! This rack is built tough!

 

[Urander]

Unfortunately, our side compartment sits on top of the tonneau applique, which needs to be removed to open the CyberTent. That said, we are currently working on a new pass through tent that will allow you to stand in the bed and access the tent directly from the bed. It’s coming very soon and is designed to have minimal range impact. This may be our ultimate solution for the Cybertruck platform. Please check back early next year to see if it’s something you might be interested in.

 

[DJAlan2000]

@Urander’s rack is easy to remove off the truck as one whole unit. Just remove the 8 bolts and with a few strong humans or a simple $150 lift - comes right off! This rack is built tough!

I'm putting the bed rack with windows and 'door' on the back (what others used to call a 'camper shell')... I would LOVE to be able to do this (take it off easily by 'raising' it up in the garage)!!

I'm not sure it can be taken off 'whole' or not though, I think it's quite a bit heavier than the molle rack... But it sure does seem sturdy so far (only halfway into the install)...

If it can be though, that will be AWESOME... then someone just needs to figure out how to make some kind of 'quick attach/release' method to attach/detach from the truck...

Please, if ANYONE knows of some kind of faster way to attach/detach let me (us all!) know, because getting in there with a wrench (no room to get a socket on really) is NOT an easy thing to do!

 

[Urander]

I'm putting the bed rack with windows and 'door' on the back (what others used to call a 'camper shell')... I would LOVE to be able to do this (take it off easily by 'raising' it up in the garage)!!

I'm not sure it can be taken off 'whole' or not though, I think it's quite a bit heavier than the molle rack... But it sure does seem sturdy so far (only halfway into the install)...

If it can be though, that will be AWESOME... then someone just needs to figure out how to make some kind of 'quick attach/release' method to attach/detach from the truck...

Please, if ANYONE knows of some kind of faster way to attach/detach let me (us all!) know, because getting in there with a wrench (no room to get a socket on really) is NOT an easy thing to do!

Here’s a pic of the Gen 2 cap on the ceiling. Unfortunately, the Cybertruck owner is experiencing a PCS failure and had to remove the cap to get it fixed, but luckily it’s covered under warranty. Our truck is almost at 50k miles and after that, the cost will be $6 to $7k

 

[DJAlan2000]

Here’s a pic of the Gen 2 cap on the ceiling. Unfortunately, the Cybertruck owner is experiencing a PCS failure and had to remove the cap to get it fixed, but luckily it’s covered under warranty. Our truck is almost at 50k miles and after that, the cost will be $6 to $7k

That would work...

What are you using to do the lifting? Looks like you have some kind of 'spreader' bar with the straps running through the windows... I am VERY interested to know what the lifter is as well as the 'accessories' needed (that bar in the picture and straps)...

 

[Urander]

That would work...

What are you using to do the lifting? Looks like you have some kind of 'spreader' bar with the straps running through the windows... I am VERY interested to know what the lifter is as well as the 'accessories' needed (that bar in the picture and straps)...

We saw the pic from here

@affinity Hey Jimin! Would you mind sharing a few details about your garage lift when you get a chance?

 

[affinity]

This is the garage lifter I used.

All the accessories come with it including straps.
https://www.smarterhome.com/products/universal-xl-hd-lifter

I've used engine hoist along with the lift since I had other stuffs installed on my rack and total weight was almost 200lbs.

We saw the pic from here

@affinity Hey Jimin! Would you mind sharing a few details about your garage lift when you get a chance?

 

[Fugue]

This is the garage lifter I used.

All the accessories come with it including straps.
https://www.smarterhome.com/products/universal-xl-hd-lifter

I've used engine hoist along with the lift since I had other stuffs installed on my rack and total weight was almost 200lbs.

Congrats on the baby! Hopefully you have your truck back in time. I brought my youngest home from the hospital in my Cybertruck.

 

[Urander]

Congrats on the baby! Hopefully you have your truck back in time. I brought my youngest home from the hospital in my Cybertruck.

Same here!

 

[Fugue]

Same here!

Congrats!

Sponsored