Cover for Behind Driver Side Tow Hook?

[NaptownRick]

For other owners...do you have a cover that goes behind this tow hook? I just noticed after a few weeks that the passanger side has a cover, but I did not notice this drivers side one missing when I took delivery. I'm taking it in for a few small odd and ends, and I don't want to say it's missing if there is not one for this side.

It looks like there are some holes for clips that should have a cover.

Thanks!

Sponsored

 

[AlmostHuman]

Yes I have covers. Talked to the other person that has a Cybertruck in my town. He does not have covers. Not that this should matter at all. I picked my truck up from Pleasant Grove, Utah. He had a friend pick his truck up at the factory and trailer it up to Utah. I would assume these should be installed at the factory.

 

[NaptownRick]

Yes I have covers. Talked to the other person that has a Cybertruck in my town. He does not have covers. Not that this should matter at all. I picked my truck up from Pleasant Grove, Utah. He had a friend pick his truck up at the factory and trailer it up to Utah. I would assume these should be installed at the factory.

Awesome, thanks! Maybe it was used to secure to the carrier and they forgot to put it back on. Either way, good to know! I'll add this to my service list.

Rick

 

[hridge2020]

For other owners...do you have a cover that goes behind this tow hook? I just noticed after a few weeks that the passanger side has a cover, but I did not notice this drivers side one missing when I took delivery. I'm taking it in for a few small odd and ends, and I don't want to say it's missing if there is not one for this side.

It looks like there are some holes for clips that should have a cover.

Thanks!

See Post #3

Yes I would say you need both.

https://www.cybertruckownersclub.com/forum/threads/tow-hook-threads-are-exposed.14306/#post-311314

 

[NaptownRick]

See Post #3

https://www.cybertruckownersclub.com/forum/threads/tow-hook-threads-are-exposed.14306/#post-311314

Thank you for pointing that out, but in case it wasn't clear my original question was about the whole plastic piece with clips that fits over the entire area and snaps into the lower valance, not just a plug for the threads inside the hole (although that is a valid concern!):

VS

Sponsored