If you have the door open and glass all the way up, take a pocket screw driver and close the latch in the door. The window will go up another 1 inch or so. That way the tint is installed to cover all the glass that can be exposed.
The trick is , when get ready to close door with glass up, hit...
You can replace it your self with some basic hand tools. But …. The rear Authenticator will need to have firmware update. Can’t do that though the UI
More than likely the large bolt that secures axle shaft to hub is loose. This will allow the axle shaft move inboard and not contact the hub. Axle shaft replacement is the fix.
That truck has not been delivered to a customer yet. Can tell by the UI. May have been Transport damage or something found by service team. Either way that is not a fun job
It’s called the VC left. It’s on the firewall driver side behind break pedal. About 30 mins to replace and another 30 worth of programming. It’s one of 3 mid voltage controllers.
You will need the entire front fascia and inner fender liner pass side. Get some extra of the push pins too that hold the liner on. The entire job will take about an hour. Fairly easy task