Bed divider w/ bed liner?

[Coolhandz]

Anyone using the CT bed cargo divider with a bed liner? I'm asking because with mine, the liner is apparently pretty thick and I can't get the divider to lock into the L-track. I was looking at removing the rubber feet on the divider, but they are riveted on instead of screwed on. Anyone have a similar setup with a solution?

Sponsored

 

[ABILISK]

No experience with this, but I do have the cargo divider and was considering the OEM textile mat. Is that what you have? I would hope the OEM combo would work

 

[TwiztOG43]

I ended up getting rid of my OEM and using the after mart bed divider with adjustable feet

 

[Coolhandz]

I ended up getting rid of my OEM and using the after mart bed divider with adjustable feet

I didn't know those were a thing until now. Might have to go the same route. Thanks.

 

[hemiarch]

I used a tpe liner and the textile mat from Tesla and wasn’t an issue with the cybergear divider.
now I use a tmat and it still works ( but a little pointless with the tmat)

 

[bg002h]

Anyone using the CT bed cargo divider with a bed liner? I'm asking because with mine, the liner is apparently pretty thick and I can't get the divider to lock into the L-track. I was looking at removing the rubber feet on the divider, but they are riveted on instead of screwed on. Anyone have a similar setup with a solution?

Yup. Beat the shit out of it until you bend the extending part at the side to meet the rounded openings on the truck. Or pay to ship it back. It’s retarded work avoiding level of pseudo-engineering on that product. Get one of the third party ones with adjustable feet at half the price.

 

[Rook-E]

Anyone using the CT bed cargo divider with a bed liner? I'm asking because with mine, the liner is apparently pretty thick and I can't get the divider to lock into the L-track. I was looking at removing the rubber feet on the divider, but they are riveted on instead of screwed on. Anyone have a similar setup with a solution?

I used a comealong hooked to the d rings to force it down until I could lock it in place. This was a pain having to redo it every time the divider was removed. I finally complained to Tesla that I never receive an updated divider. They asked me to send video or picture evidence(I never mentioned the bed liner part). I did, and they sent me a new divider. This new one has rubber shims that can be taken off so now it works great with my bedliner.

 

[Jedi2155]

I used this bedliner + this bed divider, and it works great.

 

[JER]

Did I read that right that tesla will replace the first version with the adjustable foot model? Who do you contact for that? Thanks

 

[machmax]

I have an OEM bed divider (purchased Nov 2024) and aftermarket bedliner. Yes the liner adds some thickness but the divider has 2 layer for rubber feet for each side. I removed the very bottom and it fits perfectly. Secured at the bottom when latched and moves freely when unlatches.
Jedi2155’s divider is the other option. I believe that has an adjustable feet. My brother recommended that but I already have a divider so…

 

[jefflawless]

Anyone using the CT bed cargo divider with a bed liner? I'm asking because with mine, the liner is apparently pretty thick and I can't get the divider to lock into the L-track. I was looking at removing the rubber feet on the divider, but they are riveted on instead of screwed on. Anyone have a similar setup with a solution?

I have a third party bed liner with my Tesla cargo divider and while it locks in place, it usually shifts when I access the under storage in the bed. I do it often enough the divider will come loose and I have to reset it. I think at some point I need to look for a better solution. It’s not a huge deal now so I just live with it.

 

[Rook-E]

Did I read that right that tesla will replace the first version with the adjustable foot model? Who do you contact for that? Thanks

The process worked for me. I started with a SC but they stated I needed to contact the online shop.

 

[JER]

Thanks for the info

 

[jefflawless]

The process worked for me. I started with a SC but they stated I needed to contact the online shop.

Did you just email the Tesla Shop or did you have to open a service ticket?

 

[JER]

I just e-mailed the support e-mail lets see what they say?

Sponsored