Cyberbeast waiting room ⏳

[Balthezor]

I fixed mine; if it bothers you there are several threads (with video links) on DIY fixes. No biggy.

Which video did you follow that worked for you?

Sponsored

 

[smcnaughton829]

I fixed mine; if it bothers you there are several threads (with video links) on DIY fixes. No biggy.

I have seen a few of them, was hoping they would have gotten that fixed with my VIN. But unfortunately they didn’t. So I’ll be really reading how to fix it.

 

[Art138]

My vin was 27xxxxx ; the seal is similar to the one used to repair the leak in the video. I did notice the factory seal was not installed uniformly so replaced as per this video.

 

[Art138]

Which video did you follow that worked for you?

See attached

 

[Balthezor]

See attached

Thank you sir

 

[nasg]

Great minds think alike

Not to turn this into Wallstreet Bets, but real quick, what's your PT? I'm thinking that Q3 results (after robotaxi) will take us to $350. Safe bet is to sell option at $325.

I lurk there too!
I have $260 calls mid Nov that print at $262.50, I'll start shedding at $300. ?

 

[2blentendre]

I lurk there too!
I have $260 calls mid Nov that print at $262.50, I'll start shedding at $300. ?

Looks like we're both in a similar spot! Lets see what happens and reconvene. Good luck friend.

 

[CYBROCKET]

Contact them tomorrow. They are closed on Sunday. Looks like someone turned down a VIN and it got assigned to you. Normal. That's what happened to me.

Got it sorted out and picking up tomorrow. The one thing I am concerned about is my original VIN was 037xxx and the new vin is 036xxx. From my understanding it seems like particular one was manufactured a while ago?

 

[Balthezor]

Got it sorted out and picking up tomorrow. The one thing I am concerned about is my original VIN was 157xxx and the new vin is 036xxx. From my understanding it seems like particular one was manufactured a while ago?

I would take the newer VIN.

 

[CYBROCKET]

I would take the newer VIN.

Ok, I am an idiot that can’t do math… the VINs are only 350 off from each other, which is like 3 days of manufacturing. I really need coffee in the morning before doing math.

 

[AbblePC]

Got it sorted out and picking up tomorrow. The one thing I am concerned about is my original VIN was 037xxx and the new vin is 036xxx. From my understanding it seems like particular one was manufactured a while ago?

Don’t be overly concerned, I picked my Cyberbeast up in Mechanicsburg on Saturday the 28th VIN 356XX and it was flawless (even the A pillar trim piece that everyone else complains about jutting outward but all of my panels are perfectly aligned). Loving it already and looking for every reason to be out driving it.
Now just waiting for the FSD software update everyone else is getting as mine is still stuck on 2024.26.300.1 version.

While I was there Saturday I also met another mother dropping her son off to pick up his AWD Cybertruck and Arian the Tesla advisor onsite told me my Cyberbeast was only like the 2nd or 3rd they delivered there, all others about 2 dozen have been AWD versions, then we have your Cyberbeast being picked up so they are Beast multiplying lol.

 

[CYBROCKET]

Don’t be overly concerned, I picked my Cyberbeast up in Mechanicsburg on Saturday the 28th VIN 356XX and it was flawless (even the A pillar trim piece that everyone else complains about jutting outward but all of my panels are perfectly aligned). Loving it already and looking for every reason to be out driving it.
Now just waiting for the FSD software update everyone else is getting as mine is still stuck on 2024.26.300.1 version.

While I was there Saturday I also met another mother dropping her son off to pick up his AWD Cybertruck and Arian the Tesla advisor onsite told me my Cyberbeast was only like the 2nd or 3rd they delivered there, all others about 2 dozen have been AWD versions, then we have your Cyberbeast being picked up so they are Beast multiplying lol.

Great to hear yours was flawless on the alignment! That was what I was most concerned about but it sounds like they got it fixed. I got about 150 miles of driving planned for today after I get it and am very much looking forward to it.

I take it you got the wheel covers but no light bar?

 

[CYBROCKET]

Don’t be overly concerned, I picked my Cyberbeast up in Mechanicsburg on Saturday the 28th VIN 356XX and it was flawless (even the A pillar trim piece that everyone else complains about jutting outward but all of my panels are perfectly aligned). Loving it already and looking for every reason to be out driving it.
Now just waiting for the FSD software update everyone else is getting as mine is still stuck on 2024.26.300.1 version.

While I was there Saturday I also met another mother dropping her son off to pick up his AWD Cybertruck and Arian the Tesla advisor onsite told me my Cyberbeast was only like the 2nd or 3rd they delivered there, all others about 2 dozen have been AWD versions, then we have your Cyberbeast being picked up so they are Beast multiplying lol.

Got the truck today. Arian was super helpful. The truck is flawless and the A pillar trim was perfectly aligned. The panel gaps are all dead on and perfectly aligned.

This is my first Tesla and it is a joy to drive. Put about 90 miles on it today and it was an absolutely thrilling experience.

I am also waiting on FSD. Probably good I am getting used to the driving for a few days before trying that out.

 

[AbblePC]

Got the truck today. Arian was super helpful. The truck is flawless and the A pillar trim was perfectly aligned. The panel gaps are all dead on and perfectly aligned.

This is my first Tesla and it is a joy to drive. Put about 90 miles on it today and it was an absolutely thrilling experience.

I am also waiting on FSD. Probably good I am getting used to the driving for a few days before trying that out.

Wow, just awesome, I am so glad it worked out well for you and that they were able to get your VIN sorted to the new Cyberbeast and on the road asap.
Ive been driving in the rain for 4 days now lol. I dont know if after the rain stops will be so great, as at least currently the truck is constantly in rain and no finger prints are obvious ha ha.
I still have to post pictures yet and have been so busy since delivery but will eventually get around to posting to make it official and update the owners thread with a perfect delivery.
Also I am assuming you have the new fire truck sounding horn on your Cyberbeast as I and other newer owners do?

Well enjoy and hopefully we will see each other while traveling around PA and give the Cyber wave (whatever that is) lol.

 

[Balthezor]

Got the truck today. Arian was super helpful. The truck is flawless and the A pillar trim was perfectly aligned. The panel gaps are all dead on and perfectly aligned.

This is my first Tesla and it is a joy to drive. Put about 90 miles on it today and it was an absolutely thrilling experience.

I am also waiting on FSD. Probably good I am getting used to the driving for a few days before trying that out.

Congratulations! I am a Beast owner as well near you. Glad it worked out and you got the wheels/tires you wanted as well!

Sponsored