Installed the Phone Charger Silicone Mat, Cup Holder Organizer and Cyber Trashcan (by BestEVMod / EVVida)

[getsometom]

Phone charger silicone mat by BestEVMod / EVVida:
I decided to try this out since it makes it much easier to clean out all the random crumbs, dust, trash that collects in this area since it naturally operates as a shelf-life area. The silicone mat fits well with the Cybertruck aesthetic. If no one told me it's an extra piece, I would have guessed it's part of the truck. It's easily removable. One of these days, I'm going to sandwich some non-wireless charging material between this mat and the wireless charger below so it will stop heating my phone.
https://ev-vida.store/products/cent...a-silicone-mat-for-cybertruck?rs_ref=xFvJg2cX

Cup holder organizer by BestEVMod / EVVida:
This pairs well with the silicone mat from above. It lets me keep frequently used accessories nearby like sunglasses, glass wipes, Altoids without needing to dig around in the center console. It's also a good phone holder if you don't want to put it in the wireless charging area. I intend on keeping a small bottle of hand sanitizer here as well.
https://ev-vida.store/products/lowe...ith-cup-holder-for-cybertruck?rs_ref=xFvJg2cX

Cyber Trashcan:
Found this small polygonal trashcan. It provides a great place to throw away random trash like straw covers, sauce packets, etc. It comes with a clip on the back that I used to clip onto the lower console floor organizer so it will not move during driving.
https://ev-vida.store/products/front-lower-console-organizer-for-cybertruck?rs_ref=xFvJg2cX
https://a.co/d/fc9quyF

Bonus:
There is a smaller polygonal trashcan that fits in the cupholder. I didn't order it since I like to retain my cupholders locations.
https://a.co/d/7HfLtF6

Cyberbeast 3D emblem
https://makerspacedude.etsy.com/listing/1758942935/cyberbeast-3d-laser-cut-emblem-badge

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti frame
https://makerspacedude.etsy.com/listing/1717907620/cybertruck-graffiti-stainless-steel

CYBERBEAST frame
https://makerspacedude.etsy.com/listing/1722675176/cyberbeast-graffiti-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

CYBERBEAST vanity plate
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license

Sponsored

 

[tmeyer3]

Phone charger silicone mat by BestEVMod / EVVida:
I decided to try this out since it makes it much easier to clean out all the random crumbs, dust, trash that collects in this area since it naturally operates as a shelf-life area. The silicone mat fits well with the Cybertruck aesthetic. If no one told me it's an extra piece, I would have guessed it's part of the truck. It's easily removable. One of these days, I'm going to sandwich some non-wireless charging material between this mat and the wireless charger below so it will stop heating my phone.
https://ev-vida.store/products/cent...a-silicone-mat-for-cybertruck?rs_ref=xFvJg2cX

Cup holder organizer by BestEVMod / EVVida:
This pairs well with the silicone mat from above. It lets me keep frequently used accessories nearby like sunglasses, glass wipes, Altoids without needing to dig around in the center console. It's also a good phone holder if you don't want to put it in the wireless charging area. I intend on keeping a small bottle of hand sanitizer here as well.
https://ev-vida.store/products/lowe...ith-cup-holder-for-cybertruck?rs_ref=xFvJg2cX

Cyber Trashcan:
Found this small polygonal trashcan. It provides a great place to throw away random trash like straw covers, sauce packets, etc. It comes with a clip on the back that I used to clip onto the lower console floor organizer so it will not move during driving.
https://ev-vida.store/products/front-lower-console-organizer-for-cybertruck?rs_ref=xFvJg2cX
https://a.co/d/fc9quyF

Bonus:
There is a smaller polygonal trashcan that fits in the cupholder. I didn't order it since I like to retain my cupholders locations.
https://a.co/d/7HfLtF6

Oh, the little ones fit in the door. Going for that!
Does the larger can stay in place on pumpy roads/off-road?

 

[getsometom]

Oh, the little ones fit in the door. Going for that!
Does the larger can stay in place on pumpy roads/off-road?

It works well on bumpy roads for me but not sure about the off roading

 

[rtfitch]

Phone charger silicone mat by BestEVMod / EVVida:
I decided to try this out since it makes it much easier to clean out all the random crumbs, dust, trash that collects in this area since it naturally operates as a shelf-life area. The silicone mat fits well with the Cybertruck aesthetic. If no one told me it's an extra piece, I would have guessed it's part of the truck. It's easily removable. One of these days, I'm going to sandwich some non-wireless charging material between this mat and the wireless charger below so it will stop heating my phone.
https://ev-vida.store/products/cent...a-silicone-mat-for-cybertruck?rs_ref=xFvJg2cX

Cup holder organizer by BestEVMod / EVVida:
This pairs well with the silicone mat from above. It lets me keep frequently used accessories nearby like sunglasses, glass wipes, Altoids without needing to dig around in the center console. It's also a good phone holder if you don't want to put it in the wireless charging area. I intend on keeping a small bottle of hand sanitizer here as well.
https://ev-vida.store/products/lowe...ith-cup-holder-for-cybertruck?rs_ref=xFvJg2cX

Cyber Trashcan:
Found this small polygonal trashcan. It provides a great place to throw away random trash like straw covers, sauce packets, etc. It comes with a clip on the back that I used to clip onto the lower console floor organizer so it will not move during driving.
https://ev-vida.store/products/front-lower-console-organizer-for-cybertruck?rs_ref=xFvJg2cX
https://a.co/d/fc9quyF

Bonus:
There is a smaller polygonal trashcan that fits in the cupholder. I didn't order it since I like to retain my cupholders locations.
https://a.co/d/7HfLtF6

Cyberbeast 3D emblem
https://makerspacedude.etsy.com/listing/1758942935/cyberbeast-3d-laser-cut-emblem-badge

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti frame
https://makerspacedude.etsy.com/listing/1717907620/cybertruck-graffiti-stainless-steel

CYBERBEAST frame
https://makerspacedude.etsy.com/listing/1722675176/cyberbeast-graffiti-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

CYBERBEAST vanity plate
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license

Tom, I have been having so much fun with Blitzen the Beast that I have failed to let you know that the Premier Wrapping/PPF company in Houston was very, very impressed with your 3D Beast Emblem. We wrapped the Beast in 3M Deep Space, did not put the Foundation decals on it and installed your emblem on the tailgate and the Cyberbeast license frame. Minimal but outstanding...I gave them your information, I believe that your emblems may become a mainstay. Write privately for more info. PS, the pic does not do it justice as it is glossy and reflecting the surrounding environment.

 

[Red Beard Ops]

Does this mat you listed slow down the charging at all? I'm hoping it does so that the phone charges cooler?

 

[getsometom]

Tom, I have been having so much fun with Blitzen the Beast that I have failed to let you know that the Premier Wrapping/PPF company in Houston was very, very impressed with your 3D Beast Emblem. We wrapped the Beast in 3M Deep Space, did not put the Foundation decals on it and installed your emblem on the tailgate and the Cyberbeast license frame. Minimal but outstanding...I gave them your information, I believe that your emblems may become a mainstay. Write privately for more info. PS, the pic does not do it justice as it is glossy and reflecting the surrounding environment.

Congrats on the new wrap, I like the deep space choice. Hoping you can share more pictures.

Thanks for relaying my info to the wrap shop. I’ll send you a DM

 

[getsometom]

Does this mat you listed slow down the charging at all? I'm hoping it does so that the phone charges cooler?

I’ve stopped using this wireless charger for the phone so I am unsure about the charging speed. However my iPhone 15 pro does identify as charging if placed in this location with the mat installed.

 

[Red Beard Ops]

I’ve stopped using this wireless charger for the phone so I am unsure about the charging speed. However my iPhone 15 pro does identify as charging if placed in this location with the mat installed.

Interesting. I was just hoping that the added distance would slowdown the charging a little and produce a cooler phone... making the charger actually usable.

Sponsored