Sun visor from amazon

[Jhodgesatmb]

Perfect fit blocks sun glare looks OEM. I ended up plasti dipping the other side that was foil looking so it does not stand out on the front windshield looking inside the truck from the outside. ??

https://www.amazon.com/gp/aw/d/B0CPXP22V5?psc=1&ref=ppx_pop_mob_b_asin_title

The link in the post doesn't go to anything like this. Can you please update with an appropriate link?

Sponsored

 

[L3it3R]

The link in the post doesn't go to anything like this. Can you please update with an appropriate link?

https://www.amazon.com/dp/B0F2F8FQ2W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

 

[Jhodgesatmb]

So whenever you get the burning beam of sun through that gap, does anyone just do this? .Sorry for the blurry pics, phone just came out of my one year old’s mouth. It’s artfully passed through a drool filter

I do that all the time, but then there is nothing for the lower section. In a way it would have been very helpful to have a bi-fold where one section could fold up and another could fold down. It is also unfortunate that the sun visors cannot anchor along the door when there is glare on the side but that isn't a big deal.

 

[Jhodgesatmb]

https://www.amazon.com/dp/B0F2F8FQ2W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Thanks. Is this something that articulates out of the way or do you have to remove it altogether (like other screens)? I definitely suffer from too much sun at times but at other times want the full view.

 

[L3it3R]

Thanks. Is this something that articulates out of the way or do you have to remove it altogether (like other screens)? I definitely suffer from too much sun at times but at other times want the full view.

It's very easy to put in and take out. I have not once removed it since I got it though. Vastly prefer it. Again, not an issue for me at 6'5"

 

[DarkEye]

Got mine yesterday and an easy install. So far I'm liking them.

 

[Mark V]

My first post to the forum. I just got my AWD last Friday and have been busy adding all sorts of accessories. I purchased the one linked above off of Amazon and returned it pretty quickly. IMO, It was too big and made the windshield feel much smaller.
I just found and ordered these and should get them in a couple days. I like that they are smaller and should only block the area above the visor, but will report back when I have them in hand.
https://www.amazon.com/dp/B0DNSTWL2R?ref=ppx_yo2ov_dt_b_fed_asin_title

It attaches using suction cups so is removable and reversible. Obviously, the one negative is the white knobs, but I think some black paint of plasti-dip should fix that pretty easily.
We shall see.

 

[Mark V]

Update: they came today
Seem to be decent quality. They cover the area where the sun visor sits, so you can fold it down without getting the sun in your eyes from above.
I added some photos of the visors and their instillation. The last photo show a handle bar I added to make it easier for my wife to get it.
Hope it helps everyone.

 

[dalton108]

https://www.amazon.com/dp/B0F2F8FQ2W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

This is the one.

 

[Mark V]

A little spray paint and now blends in beautifully.

 

[MICyber]

It looks like this is a set with the large one I already have from the foundation series and two visor ones. I'd buy if you'd offer just the visor shades.

 

[Limes2]

Tank mode engaged.

 

[hemiarch]

Got mine today and love them.
Not permanent for me but very useful

Are you all using the clips? They are decent looking clips but these hold on just fine without them.
maybe if you’re bouncing around in Moab?

 

[Mark V]

Got mine today and love them.
Not permanent for me but very useful

Are you all using the clips? They are decent looking clips but these hold on just fine without them.
maybe if you’re bouncing around in Moab?

I returned those. They didn't have any clips to hold them and covered too much of the front Window for my liking. The ones I posted above only come to edge of the sunviseor when closed. That way, when the visor is down it covers the top space, but when the visor is up, you don't see it hardly at all. It sticks with 2 suction cups and is reversible if for some reason your want the reflective side facing inside.

 

[hemiarch]

I returned those. They didn't have any clips to hold them and covered too much of the front Window for my liking. The ones I posted above only come to edge of the sunviseor when closed. That way, when the visor is down it covers the top space, but when the visor is up, you don't see it hardly at all. It sticks with 2 suction cups and is reversible if for some reason your want the reflective side facing inside.

Point taken about the length. Mine came with a bag of clips in the carry case similar to those that came with the Tesla FS roof glass shade

Sponsored