Tesstudio Cybertruck Cooler button fix for accidental knee bumps

[cyber_moonlight]

If you’ve got the Tesstudio cooler in your Cybertruck and you actually like sitting like a normal human, you may have run into this: your knee randomly smacks the side buttons and suddenly you’ve changed the temp, turned it off, or otherwise annoyed yourself for no good reason.

Maybe I’m the only idiot this happens to, but the button placement is honestly kind of impressive in the worst possible way.

So I made a fix.

I designed a small 3D-printed guard that sticks around the buttons with double-sided tape and keeps your knee from sabotage mode. Super simple, works great, and now the cooler only changes settings when I actually want it to.

I attached the STL in case anyone wants to print one for themselves.
PLA at 30% infill worked fine for me (no support needed). Print time was about 30 minutes.

Sponsored

 

[MCraft99]

Thank you for this. I'm constantly hitting the buttons with my knees and bags in the passenger side.

 

[ChiTownCT]

LOL great idea, any chance anyone knows a place I send this file to so they can print and send?

 

[deek]

LOL great idea, any chance anyone knows a place I send this file to so they can print and send?

Wow, just what I needed. Dm me an address and I will send you a couple.

 

[ChiTownCT]

Wow, just what I needed. Dm me an address and I will send you a couple.

Sent!

 

[cyber_moonlight]

Wow, just what I needed. Dm me an address and I will send you a couple.

Thanks Deek! Good looking out

 

[Qixer01]

Been hoping somewhat would come up with a fix for this. Thank you.

 

[Qixer01]

does this work for the passenger side buttons also?

 

[rbrdky]

You have measurably improved my life today. THANK YOU. Printing now. I'm going to reverse it to try to print one for the passenger side also.

 

[Qixer01]

You have measurably improved my life today. THANK YOU. Printing now. I'm going to reverse it to try to print one for the passenger side also.

I was unsuccessful in mirror or flipping to work on passengers side.

the drivers one will fit if your ok with it not matching corners and angles.

 

[cyber_moonlight]

I was unsuccessful in mirror or flipping to work on passengers side.

the drivers one will fit if your ok with it not matching corners and angles.

Is this photo of you trying to put it on the passenger side? Because if not, then you installed it in reverse hence why it doesn’t look like it fits

 

[Qixer01]

Is this photo of you trying to put it on the passenger side? Because if not, then you installed it in reverse hence why it doesn’t look like it fits

Yes. This is a pic of the drivers side 3d print installed on the passenger side.

 

[cyber_moonlight]

Yes. This is a pic of the drivers side 3d print installed on the passenger side.

I see. Yeah doesn’t look nice. I’ll see if I can make a copy that fits the passenger side better.

 

[AverageJoe]

I have seen a version that has lines between the buttons as well... Somewhere but I haven't set my 3d printer back up yet. Not my file to give or I would but it's out there both sides for free

 

[cyber_moonlight]

Found it here: https://makerworld.com/en/models/2762219-cybertruck-cyber-fridge-button-guard

Sponsored