VDR
Well-known member
The Hummer EV isn't even 10,000lbs, & it has a 212kwh packThat would mean the total weight of the vehicle would be well over 10,000 pounds.
50kw of additional pack weighs 650lbs (13lbs/kwh).
Sponsored
The Hummer EV isn't even 10,000lbs, & it has a 212kwh packThat would mean the total weight of the vehicle would be well over 10,000 pounds.
RE: High Beams. Standard on many cars for low beams to stay on while button/lever is pushed. What you are seeing is the low beams go off when you release the button.Summary:
46 degree temperature
70 mph
Run until battery completely empty consuming ~122 kWh
Covered 254 miles at ~2.05 m/kWh efficiency
There are hundreds of electric companies/ co-ops with flat per kWh costs. Its my job to know this and I am 100% certain my statement is accurate and demand charges for residential use will soon become more common than they are now.M8, I think you have that backwards. I don't know of a single electric provider that doesn't offer cheaper rates to encourage usage outside of peak load times.
You will certainly be getting tires much more frequently in a cybertruck than the average half ton truck. Its heavier, torquier and steers with both axles.You forgot oil and filter changes. And the yearly maintenance checks.
Why do you think that you have to change the Cybertruck's wheels more often? Drive it and your comparison the same, the tires should be pretty close.
This will be my fifth EV. EVSEs have already been amortized and If I were a first time buyer, it would be amortized moving forward.
And the number of locations without big supercharger infrastructures is dwindling rapidly. Actually you have to work hard to find one these days.
what database do you use? anything similar to this one?: https://openei.org/wiki/Utility_Rate_DatabaseThere are hundreds of electric companies/ co-ops with flat per kWh costs. Its my job to know this and I am 100% certain my statement is accurate and demand charges for residential use will soon become more common than they are now.
I use our own internal database that is comprised of all the various active meter rates in the markets in which my business operates. We keep very close tabs on our competition (utility companies). Another new(er) trick utility companies are doing to prevent sticker shock is flex rates vs neighboring residents consumption.what database do you use? anything similar to this one?: https://openei.org/wiki/Utility_Rate_Database
And I guess I would need to amend my statement to cover all electricity brokerage, since I don't rightly know the ratio for residential services in the U.S.
If this report is accurate, it looks like "14% of all US utilities offer a residential TOU rate; roughly half of IOUs offer one".I use our own internal database that is comprised of all the various active meter rates in the markets in which my business operates. We keep very close tabs on our competition (utility companies). Another new(er) trick utility companies are doing to prevent sticker shock is flex rates vs neighboring residents consumption.
generic example. John Doe, you used 1400kWh this month x your “rate” of $.165/kWh HOWEVER you used 15% more than your variance comparison, so we have multiplied that rate accordingly and also multiplied your other associated fixed costs, municipal fees etc but the same. Its of course never spelled out that way but it’s exceedingly common.
As more and more people get EVs demand charges will be standardized. Very likely before 2030
An EPA 500 would have given a realistic 300-400 though.For the nth time:
No one promised 500 miles at 70 mph.
Stop trolling.
-Crissa
Thanks you,https://www.cybertruckownersclub.co...en-by-marques-brownlee-mkbhd.9969/post-201830
Which should be more useful than the other anecdotal reports you’ve collected around here, purportedly
useful as it is, it’s still not exactly relevant to a compare of Kyle’s range test
but if you must know, at highway speeds i easily get 2.44mi/kWh, which is better than the EPA hey rating of 2.16mi/kWh
to which you say “but it’s hot” which is true
but it’s also south texas in summer, which is dry - which increases air resistance compared to anywhere I assume Kyle is testing north of here this time of year
but my truck isn’t on 35” ATs at highway speeds
and after several years active on Lightning forum, if we’re comparing anecdotal evidence, people who understand BEV trucks consistently get at or over EPA hwy rated figures for mi/kWh
yes@cvalue, am I too far off with this conclusion?
Truth. I’m on my 3rd set of tires on my 64k mile M3. Apparently I like acceleration…. HahahYou will certainly be getting tires much more frequently in a cybertruck than the average half ton truck. Its heavier, torquier and steers with both axles.
Can you clarify? What did I get wrong?yes
it’s like you didn’t even read the post
But that's not what was being compared, tho.An EPA 500 would have given a realistic 300-400 though.