Show us an accessory we’ve never seen before! MFZ Challenge thread.

[Loudness]

Different type of charger. The Olight uses this one.

You could go with a shorty adapter: https://www.amazon.com/JSADZKJ-Degree-Charging-TransferFlat-Flexible/dp/B0DM4QZ6W6/

Sponsored

 

[Sabercoug]

You could go with a shorty adapter: https://www.amazon.com/JSADZKJ-Degree-Charging-TransferFlat-Flexible/dp/B0DM4QZ6W6/

That might work for @HaulingAss but I'm ok with a longer one as I don't want to cut holes yet.

 

[hemiarch]

Have a fun one I suggested in another thread but came in the mail and really is a very nice fit for our trucks.
If
You’re looking for some way to hang a phone or tablet in the back seat or whatever else. This device is handy dandy.
DICMKY Car iPad Tablet Holder... https://www.amazon.com/dp/B0FHGNN1M2?ref=ppx_pop_mob_ap_share
Fairly close match for the storm gray but looks pretty nice with white too. (Kind of matches the piping)

It’s a standard ball joint (I think 17mm?) so you could put a magnet, phone clamp, or whatever on it.
The grey part clamps together with a clasp and is flat and soft so even if you lean you head on it, it’s not really intrusive.

 

[The Tesla Guy]

Someone needs to make a wireless charging pad to place on top of the existing charging pad so the phones actually charge. Anyone have a solution? I had a 2024 CT and now a 2025 CT and they both dont charge well.

I’ve Posted elsewhere…
Really happy with this solution.
Fast, MagSafe, charging and 3 extra cupholders.

“Wireless Charging Your iPhone 17 Pro Max in a Cybertruck”
Is an update to my last video:
“Cybertruck Wireless Phone Charger Problem Solved”

video links and links to products used below…

Wireless Charging Your iPhone 17 Pro Max in a Cybertruck


Product links to items discussed in “Wireless Charging Your iPhone 17 Pro Max in a Cybertruck” video:

RGB Wireless Car Charging Pad for Magsafe
https://a.co/d/98xhPEr

Black Tall Square Adhesive Rubber Bumper Pads
(These did require trimming using a heavy duty pair of scissors to make the the same thickness as the charging pads)
https://a.co/d/0iMI7HI
Cybertruck Wireless Phone Charger Problem Solved


Product Links from:
“Cybertruck Wireless Phone Charger Problem Solved”:

SANMIDO
Wireless Charger Car Magnetic Charging pads
https://a.co/d/erWMlWn

Taaizau
Flexible Self Adhesive Metal Strip for Magnet
https://a.co/d/dvCb1g0

Thaibear
Neodymium Magnetic Tape
https://a.co/d/3DBef5D

Foronetry
Center Console Cup Holders
https://a.co/d/bPSlUgO

BestEvMod
Center Console Phone Charger Silicone Mat
https://a.co/d/5O0Cbam

Foronetry
USB Hub (Below Rear Screen)
https://a.co/d/id8AZQs

 

[hemiarch]

I’ve Posted elsewhere…
Really happy with this solution.
Fast, MagSafe, charging and 3 extra cupholders.

“Wireless Charging Your iPhone 17 Pro Max in a Cybertruck”
Is an update to my last video:
“Cybertruck Wireless Phone Charger Problem Solved”

video links and links to products used below…

Wireless Charging Your iPhone 17 Pro Max in a Cybertruck


Product links to items discussed in “Wireless Charging Your iPhone 17 Pro Max in a Cybertruck” video:

RGB Wireless Car Charging Pad for Magsafe
https://a.co/d/98xhPEr

Black Tall Square Adhesive Rubber Bumper Pads
(These did require trimming using a heavy duty pair of scissors to make the the same thickness as the charging pads)
https://a.co/d/0iMI7HI
Cybertruck Wireless Phone Charger Problem Solved


Product Links from:
“Cybertruck Wireless Phone Charger Problem Solved”:

SANMIDO
Wireless Charger Car Magnetic Charging pads
https://a.co/d/erWMlWn

Taaizau
Flexible Self Adhesive Metal Strip for Magnet
https://a.co/d/dvCb1g0

Thaibear
Neodymium Magnetic Tape
https://a.co/d/3DBef5D

Foronetry
Center Console Cup Holders
https://a.co/d/bPSlUgO

BestEvMod
Center Console Phone Charger Silicone Mat
https://a.co/d/5O0Cbam

Foronetry
USB Hub (Below Rear Screen)
https://a.co/d/id8AZQs

Cool. Do you have to remove this to use a key card on the pad? Or can you just put it on the rgb pad.

 

[The Tesla Guy]

Cool. Do you have to remove this to use a key card on the pad? Or can you just put it on the rgb pad.

Watch both videos and you’ll see that I have them attached magnetically so you can just lift it up and drop the card key behind it

 

[hemiarch]

Watch both videos and you’ll see that I have them attached magnetically so you can just lift it up and drop the card key behind it

I did. More than once. Great videos. Thanks for making them. I don’t keep my key out though typically. That’s very nice if tis by itself. Doesn’t read through the device though right? Thats what I’m asking.

 

[The Tesla Guy]

I did. More than once. Great videos. Thanks for making them. I don’t keep my key out though typically. That’s very nice if tis by itself. Doesn’t read through the device though right? Thats what I’m asking.

Definitely won’t read through the charging pad.
Although I haven’t attempted it
It’s pretty thick and full of electronics

 

[hemiarch]

Definitely won’t read through the charging pad.
Although I haven’t attempted it
It’s pretty thick and full of electronics

It’s very nice. Maybe I’ll do this on one side and not both.

 

[eser50]

Have a fun one I suggested in another thread but came in the mail and really is a very nice fit for our trucks.
If
You’re looking for some way to hang a phone or tablet in the back seat or whatever else. This device is handy dandy.
DICMKY Car iPad Tablet Holder... https://www.amazon.com/dp/B0FHGNN1M2?ref=ppx_pop_mob_ap_share
Fairly close match for the storm gray but looks pretty nice with white too. (Kind of matches the piping)

It’s a standard ball joint (I think 17mm?) so you could put a magnet, phone clamp, or whatever on it.
The grey part clamps together with a clasp and is flat and soft so even if you lean you head on it, it’s not really intrusive.

excuse me the what ipad holder? lol

 

[hemiarch]

excuse me the what ipad holder? lol

Yeah. I didn’t name the thing.lol That’s completely over the head of whatever Chinese dude named that business.
You could go all sorts of places with that and the dangling mechanism and the ball joint yada yada but I was trying to be really good and adult about all this.
You guys just won’t let me.
Terrible influence this site.
You’re the people our priests and rabbis warn us about.
At least it’s not eggplant colored. Aubergine .

 

[eser50]

Yeah. Indidn
Yeah. I didn’t name the thing.lol That’s completely over the head of whatever Chinese dude named that business.
You could go all sorts of places with that and the dangling mechanism and the ball joint yada yada but I was trying to be really good and adult about all this.
You guys just won’t let me.
Terrible influence this site.
You’re the people our priests and rabbis warn us about.
At least it’s not eggplant colored. Aubergine .

hahaha in all honesty, that's a pretty solid suggestion. I was looking at some 3D printed ones, but don't want the wife complaining about hard plastic on the headrest.

 

[hemiarch]

Haven’t gotten these yet but wanted to crowdsource an opinion. A little pricey but I’ve always liked the stuff I get from spigen and seems like a solid idea for a Cybertruck.
https://a.co/d/gAt8UqB

 

[Sabercoug]

Haven’t gotten these yet but wanted to crowdsource an opinion. A little pricey but I’ve always liked the stuff I get from spigen and seems like a solid idea for a Cybertruck.
https://a.co/d/gAt8UqB

They do look good and I like the magnetic ability to keep from dropping/losing them. Tempting....

 

[hemiarch]

They do look good and I like the magnetic ability to keep from dropping/losing them. Tempting....

Ok. I got em. I’m a sucker for uncle Bezos’ generous return policy.

Sponsored