Aftermarket Bed Storage Bins -- Husky Heavy Duty Waterproof Stackable Plastic Storage Containers [Updated w/ photos vs. Tesla Vault Bins]

[RN1127]

Here are some pics to compare Husky box and Tesla box. Husky box is slightly shorter, you can almost put 4 husky in the space of three Tesla ones. I have not decided which one to keep yet.

Sponsored

 

[Roger@CYBERTRUCKco]

Sweet? How many does it fit from top of bed to end of bed? In the pic it looks like 4 horizontally or 3 vertically?

Will hold 3 wide, 2 rows. I didn’t check the wide side but I think 4 deep, so 8 possible

 

[Roger@CYBERTRUCKco]

Do you have any issues getting the divider to lock into place.Mine never fit properly in the back section. Tesla recently replaced it, and it also does not fit.
The first one I received had that pin with the flat portion on it.
Hoping that they would send me the revised one shown on their website that has a full circle for the pin.
Which one do you have? Is it fitting properly or does it have to almost be forced into place?
both of the units that I have received…

currently on Tesla site…

It’s not locking with the bed mat, but did without. You have to have it perfectly lined up.

 

[The Tesla Guy]

It’s not locking with the bed mat, but did without. You have to have it perfectly lined up.

Yeah, not having it lined up isn’t the issue for me in fact the online store asked me to bring it to the service center which I did.
They tried to adjust the bed down so it would fit, but were unable to do so.
The bed section is slightly higher than then the section where the storage compartment is.
So the end result is that you can get one side down so it lines up vertically, but the other side is up to high to drop into place.
But still my question is do you have the version with the full circle pins or the one like I have with the flat portions?

 

[RN1127]

Yeah, not having it lined up isn’t the issue for me in fact the online store asked me to bring it to the service center which I did.
They tried to adjust the bed down so it would fit, but were unable to do so.
The bed section is slightly higher than then the section where the storage compartment is.
So the end result is that you can get one side down so it lines up vertically, but the other side is up to high to drop into place.
But still my question is do you have the version with the full circle pins or the one like I have with the flat portions?

Same here, mine is the half circle version and won't fit the bed section as it is slight raised compared with the storage section. How did you contact Tesla online store? I only find the option to return. But I really with to get a replacement for the new version.

 

[The Tesla Guy]

Same here, mine is the half circle version and won't fit the bed section as it is slight raised compared with the storage section. How did you contact Tesla online store? I only find the option to return. But I really with to get a replacement for the new version.

They make it very cumbersome
Go to this link
https://shop.tesla.com/?tesref=true?tesref=true

Then press menu in the upper right hand corner and select “contact us”
Then you’ll be asked to sign in
Then choose the topic

Accessories / Apparel / Merchandise

And choose

Product Fit & Installation

Then you’ll have to choose that you need more help

And eventually, you will get to the screen

Once you’ve gone through this whole process, you will likely get an email eventually asking you to submit photos or video of your issue.

 

[jimnycricket65]

Do I want storage? I feel like I will have to get the bed divider. When the extenders arrive, What do I do about loading a full sheet of playwood or a stick of 2x4?

 

[Roger@CYBERTRUCKco]

Yeah, not having it lined up isn’t the issue for me in fact the online store asked me to bring it to the service center which I did.
They tried to adjust the bed down so it would fit, but were unable to do so.
The bed section is slightly higher than then the section where the storage compartment is.
So the end result is that you can get one side down so it lines up vertically, but the other side is up to high to drop into place.
But still my question is do you have the version with the full circle pins or the one like I have with the flat portions?

Half circle.

 

[Roger@CYBERTRUCKco]

Do I want storage? I feel like I will have to get the bed divider. When the extenders arrive, What do I do about loading a full sheet of playwood or a stick of 2x4?

I’m going to pack them out with all my camping gear so it’s easy to get out the door quickly and on trail.

 

[jimnycricket65]

If I get 2.5k voucher, I want to get the camper tent but I camp maybe two times a year. lol.

 

[CTSoFL]

Cargo divider + bin of your choosing = call it good and spend your money on other cool stuff

You could probably pick up some very tasty deals on mil-spec cargo boxes that are indestructible...just saying....

 

[Daryoon]

Thanks for sharing your find. And the photos of the various configurations and side by side with the Tesla version.

I reasoned that Tesla doesn’t have the economy of scale like Husky does when it comes to making storage bins. I didn’t like the Tesla price, but certainly do like how the Tesla version looks OEM. And especially how they align in the bed grooves.

It appears the way the husky version is sealed and its material chosen for the top may make the top more structure rigid than Tesla’s version. Will play with the Husky since CT’s version is forever out of stock.

 

[Stuck4ger]

I’m not sure the bed’s ridge depth and spacing but you could cut something like this to length and glue a pair on the bottom of each box to keep them in place laterally.

https://www.mcmaster.com/product/6644N111

 

[Jbrazda]

Do you have any issues getting the divider to lock into place.Mine never fit properly in the back section. Tesla recently replaced it, and it also does not fit.
The first one I received had that pin with the flat portion on it.
Hoping that they would send me the revised one shown on their website that has a full circle for the pin.
Which one do you have? Is it fitting properly or does it have to almost be forced into place?
both of the units that I have received…

currently on Tesla site…

Go to service. My bed floor is warped and they are replacing it on July 1st. Said my divider will fit properly after they replace the warped bed floor.

 

[The Tesla Guy]

Go to service. My bed floor is warped and they are replacing it on July 1st. Said my divider will fit properly after they replace the warped bed floor.

I took it to the service center
They attempted to adjust it, but we’re unable to get it low enough for the divider to properly fit
I was thinking that if it was warped, that could be the issue as well.
But I was expecting it to be warped high center instead it’s a low center
About an eighth of an inch
Was yours warped in a way that it was high in the center or on the outer edges left to right as you’re facing the bed from the tailgate?
I have an appointment for Monday for other issues and I will have them take a look again

Sponsored