NEW Cybertruck Bed L-Track Molle Shelf Rack Deck Launched by T Sportline - IN STOCK

[T Sportline]

New Bed Deck Rack with Molle Panel, in-stock now!

The Tesla Cybertruck bed design features integrate L-track mounting rails on both sides which provide the perfect adjustable mounting points for accessorizing the truck bed. T Sportline engineers have designed a heavy duty Shelf Rack Deck for the Cybertruck bed. The Shelf Rack Deck features a full molle panel design which enables the most versatile and configurable mounting or strapping configurations possible. The L-Track Molle Shelf Rack Deck can be positioned anywhere between the forward-most and rear-most L-Track points, and up to three Decks can be installed together at the same time to effectively partition and 'upper - aka the Deck surface' and 'lower - aka bed' surfaces.


The Deck is designed and engineered by T Sportline and manufactured in the USA from CNC-laser cut and electrostatic powder-coated alloy steel. Our design is precision fit specifically created for the Tesla Cybertruck L-Track bed fitment. The modular design allows for near endless installation positioning, adjusting forward and reward in the bed on the L-Track. Installation is very easy DIY, and every kit includes all the hardware required for simple bolt-on installation. No permanent modifications, drilling, or cutting is required.

Built for heavy duty use! We designed and specified this product to be plenty strong enough for enduring the most challenging work environment. Want to throw sheets of plywood or sheetrock on the Deck? No problem! Want to install three Decks to create a sleeping surface ready for your air mattress and sleeping bag? No problem! While Tesla does not offer an official 'load rating' for the side L-Track rails, we're confident in you loading each rack with 225lbs.

• Made in USA
• Cybertruck L-Track bolt-on attachment
• Rated for 225lbs
• Electrostatic powder coated CNC laser cut alloy steel
• Adjustable position - configure anywhere in bed along the l-track

Product page:
https://tsportline.com/collections/.../cybertruck-bed-l-track-molle-shelf-rack-deck

Introduction and overview video:
https://youtu.be/7zPTWy_dMvc

Sponsored

 

[Nice2CTu]

Just placed an order.

 

[Nice2CTu]

Planning to use it for spare tire, your video the spare tire looked really close to the top of the tonneau cover as it was closing, and you have the shelf rack all the way back as close to the cabin on the L-track as it will go. Question--not sure what make/model tire is in your video, can you describe and say how much clearance to the Tonneau cover? I'm also thinking of putting spare tire under the shelf rack in the bed, but I've reserved the Extended Battery and hoping it will not intrude on the shelf rack, and not sure when the battery is installed it will allow room for spare.

But looking forward to using the shelf rack!

 

[Nice2CTu]

Also, what is the weight capability of the rack?

 

[MICyber]

Glad to see aftermarket companies developing accessories for us early adopters. For that price you should include black anodized hardware. Are the products on T-Sportline's website perpetually on sale?

 

[CyberNickOH]

Definitely interested for this at some point. A product I think would be simple to design and infinite uses, would be a tool-less option for the track bar system bolts. I hate having to keep an Allen lying around.

 

[Carlos Thomas]

225 pounds.

 

[T-1000]

Also, what is the weight capability of the rack?

It says it’s 225lbs

 

[T Sportline]

Planning to use it for spare tire, your video the spare tire looked really close to the top of the tonneau cover as it was closing, and you have the shelf rack all the way back as close to the cabin on the L-track as it will go. Question--not sure what make/model tire is in your video, can you describe and say how much clearance to the Tonneau cover? I'm also thinking of putting spare tire under the shelf rack in the bed, but I've reserved the Extended Battery and hoping it will not intrude on the shelf rack, and not sure when the battery is installed it will allow room for spare.

But looking forward to using the shelf rack!

The spare will mount to the rack no problem but the tonneau cannot be closed - we figured if you're ripping off road, this is okay / typical. But just keep in mind, can't fit under tonneau.

 

[T Sportline]

Glad to see aftermarket companies developing accessories for us early adopters. For that price you should include black anodized hardware. Are the products on T-Sportline's website perpetually on sale?

We have an 'intro special' on this, but no - items do not typically last on sale perpetually. Being made in USA, this is not an inexpensive item, but we tried to keep the market price reasonable.

 

[T Sportline]

Planning to use it for spare tire, your video the spare tire looked really close to the top of the tonneau cover as it was closing, and you have the shelf rack all the way back as close to the cabin on the L-track as it will go. Question--not sure what make/model tire is in your video, can you describe and say how much clearance to the Tonneau cover? I'm also thinking of putting spare tire under the shelf rack in the bed, but I've reserved the Extended Battery and hoping it will not intrude on the shelf rack, and not sure when the battery is installed it will allow room for spare.

But looking forward to using the shelf rack!

spare will fit under the deck, yes!

 

[Frank_Castle]

Great idea, that price though

 

[TeslaKen]

New Bed Deck Rack with Molle Panel, in-stock now!

The Tesla Cybertruck bed design features integrate L-track mounting rails on both sides which provide the perfect adjustable mounting points for accessorizing the truck bed. T Sportline engineers have designed a heavy duty Shelf Rack Deck for the Cybertruck bed. The Shelf Rack Deck features a full molle panel design which enables the most versatile and configurable mounting or strapping configurations possible. The L-Track Molle Shelf Rack Deck can be positioned anywhere between the forward-most and rear-most L-Track points, and up to three Decks can be installed together at the same time to effectively partition and 'upper - aka the Deck surface' and 'lower - aka bed' surfaces.


The Deck is designed and engineered by T Sportline and manufactured in the USA from CNC-laser cut and electrostatic powder-coated alloy steel. Our design is precision fit specifically created for the Tesla Cybertruck L-Track bed fitment. The modular design allows for near endless installation positioning, adjusting forward and reward in the bed on the L-Track. Installation is very easy DIY, and every kit includes all the hardware required for simple bolt-on installation. No permanent modifications, drilling, or cutting is required.


Built for heavy duty use! We designed and specified this product to be plenty strong enough for enduring the most challenging work environment. Want to throw sheets of plywood or sheetrock on the Deck? No problem! Want to install three Decks to create a sleeping surface ready for your air mattress and sleeping bag? No problem! While Tesla does not offer an official 'load rating' for the side L-Track rails, we're confident in you loading each rack with 225lbs.

• Made in USA
• Cybertruck L-Track bolt-on attachment
• Rated for 225lbs
• Electrostatic powder coated CNC laser cut alloy steel
• Adjustable position - configure anywhere in bed along the l-track

Product page:
https://tsportline.com/collections/.../cybertruck-bed-l-track-molle-shelf-rack-deck

Introduction and overview video:
https://youtu.be/7zPTWy_dMvc

View attachment 55484

Can i add extenders on the side that will allow me to lower the position of the deck, say and inch or two? If so then I could easily put the spare on the rack and close the cover with space still under the shelf just not as much space. I can draw this out for you but in essence longer bolts in the side with spacers. I could probably make a kit with parts from the hardware store.

 

[T Sportline]

Can i add extenders on the side that will allow me to lower the position of the deck, say and inch or two? If so then I could easily put the spare on the rack and close the cover with space still under the shelf just not as much space. I can draw this out for you but in essence longer bolts in the side with spacers. I could probably make a kit with parts from the hardware store.

The side walls of the bed taper in so the deck will hit the walls if you lower it much, probably only 1/2" drop before the bed walls limit further dropping.

 

[TeslaKen]

The side walls of the bed taper in so the deck will hit the walls if you lower it much, probably only 1/2" drop before the bed walls limit further dropping.

Well that's unfortunate I was hoping to get a greater drop ?

Sponsored