Autoshift out of park? Unavailable for me

[JCERRN]

Is this feature working for anyone? It always says unavailable for me.

Sponsored

 

[Stuck4ger]

that was definitely working on my test drive. The rep was impressed that I used it

 

[Obie_fl]

Been working here. Does it not ask you to tap the brake? Do you have it enabled in the menu? What software?

From the manual:
Cybertruck automatically selects a drive mode when:
• Auto Shift out of Park is enabled.
• Cybertruck is in Park.
• The driver's seat belt is fastened.
• The brake pedal is pressed.
• All doors and trunks are closed.
• The drive mode selector on the overhead console is not activated (see Shift Using the Overhead Console on page 73).
• The cameras are free of obstructions (see Cameras on page 27) and Cybertruck has enough input to make a selection.

 

[JCERRN]

Been working here. Does it not ask you to tap the brake? Do you have it enabled in the menu? What software?

From the manual:
Cybertruck automatically selects a drive mode when:
• Auto Shift out of Park is enabled.
• Cybertruck is in Park.
• The driver's seat belt is fastened.
• The brake pedal is pressed.
• All doors and trunks are closed.
• The drive mode selector on the overhead console is not activated (see Shift Using the Overhead Console on page 73).
• The cameras are free of obstructions (see Cameras on page 27) and Cybertruck has enough input to make a selection.

yep. I checked all of this, software is v12 ⁦2024.20.9. It says unavailable when i tap the brake, and asks me to select a direction.

 

[Obie_fl]

Strange it was definitely working with ⁦2024.20.9 on mine. Only thing I can think of is try recalibrating the cameras... longshot I know. I assume you have already rebooted (two button reboot). Does your TACC work?

I normally have my foot on the brake when I buckle the seat belt and have to take my foot off and re-tap the brake to put it in gear.

 

[Stuck4ger]

yep. I checked all of this, software is v12 ⁦2024.20.9. It says unavailable when i tap the brake, and asks me to select a direction.

You do have to enable the feature on one of the menus. I think it’s Pedals and Steering, then Auto Shift out of Park

 

[JCERRN]

Strange it was definitely working with ⁦2024.20.9 on mine. Only thing I can think of is try recalibrating the cameras... longshot I know. I assume you have already rebooted (two button reboot). Does your TACC work?

I normally have my foot on the brake when I buckle the seat belt and have to take my foot off and re-tap the brake to put it in gear.

Ive tried rebooting for other reasons. Initially it said camera calibration.. maybe ill try to recalibrate

 

[JCERRN]

You do have to enable the feature on one of the menus. I think it’s Pedals and Steering, then Auto Shift out of Park

It is enabled, it just says its unavailable and i need to select a direction on the screen

 

[Stuck4ger]

And your cameras all work?

 

[Celiboy]

That’s strange it isn’t working for you. I love that feature and have been using it since day one. I’m waiting for the next iteration of it where it’ll shift from reverse back to drive when you come to a stop. My understanding it Tesla is working on it.

 

[JCERRN]

And your cameras all work?

As far as i know. I havent gotten any notifications about them

 

[Obie_fl]

As far as i know. I havent gotten any notifications about them

Does TACC work?

 

[TeslaFANa]

Does TACC work?

That was my next question cause for some it takes several hundred miles for cameras to calibrate (TACC and shift out of park both require calibration to be complete).

 

[AlmostHuman]

Use it every time I drive the truck.

 

[JCERRN]

Does TACC work?

yeah tacc works. It even slows down when it thinks i want to turn.

Sponsored