How long does it take to get off factory firmware

[elmore]

I just got my cybertruck on Friday.
I’m on 32.100.1, but I don’t even have park assist, auto park or anything.
Park assist would be soooo helpful on this big ol thing

Sponsored

 

[tenrten]

I’m in the same boat. Took delivery Saturday. We also have a MY with FSD - so it’s a massive bummer to go from having those features to nada.
Really hope it gets pushed before our Thanksgiving road trip!

 

[carsly]

takes a couple days to a couple weeks. make sure you’ve connected to WiFi otherwise it may never happen.

 

[devdrone6]

Each tesla vehicle has a certain amount of time/miles that are required for the FSD to "learn" before all features are turned on. Also make sure you are on the Advanced updates setting if you want the LAG (Latest and Greatest) versions.

 

[elmore]

I don’t understand why park assist came out on 26.11 and 32.100 doesn’t have it! Regardless… I’m loving the truck!

 

[CTMichael]

Same boat here, I did find this in the manual, so going to call.


Drive to Calibrate Cameras
Before some Autopilot features can be used for the first time or after some types of service repairs, cameras must complete a self-calibration process. When the cameras are calibrating, the touchscreen displays a progress indicator. When calibration is complete, Autopilot features are available for use.
Calibration typically completes after driving 20-25 miles (32-40 km), but the distance varies depending on the conditions. Calibration completes more quickly when driving on a straight road that has multiple lanes and highly visible lane markings in both the driving lane and adjacent lanes (at least two lanes over on each side of the vehicle). For best results, drive in the middle lane of a multi-lane highway (ideally with at least five lanes) that has clear lane markings and minimal traffic.
Schedule a service appointment only if your Cybertruck has not completed the calibration process after driving approximately 100 miles (160 km) in the described conditions.
If a camera has shifted from its previously calibrated position (for example, the camera or windshield was replaced), clear the calibration by touching Controls > Service > Camera Calibration > Clear Calibration. When the calibration is cleared, Cybertruck repeats the calibration process.

 

[dalton108]

FSD calibration is a rather quick and painless process. Factory firmware is a different story we discussed it fully over here:

https://www.cybertruckownersclub.com/forum/threads/factory-firmware.22434/#post-386848

 

[SmittS]

Took delivery on Saturday. It’s Wednesday and still stuck on 32.100.1. Continuing to wait!

 

[Hunky Dory]

Try turning on "Advanced" option under Controls > Software updates. I got my first update about two weeks after delivery in late September, but not until I turned on the Advanced option. Loving the FSD experience.

 

[mongo]

I don’t understand why park assist came out on 26.11 and 32.100 doesn’t have it! Regardless… I’m loving the truck!

Cybertruck is on a different branch of software from 3/Y.

My understanding is that Tesla doesn't ship vehicles from the factory with FSD software. That avoids certain issues when NHTSA requires a change in functionality. Namely, new vehicles cannot be sold if they have have an active uncorrected recall against them.

 

[SmittS]

Try turning on "Advanced" option under Controls > Software updates. I got my first update about two weeks after delivery in late September, but not until I turned on the Advanced option. Loving the FSD experience.

I’ve had advanced turned on since day 1, so we’ll see. Not sure why CTs have been shipping with this stripped down FW, especially considering Tesla is offering a 30 day FSD trial at delivery. My Model Y I got almost exactly 1 year ago came with FSD installed. I was able to activate it once the cameras were calibrated after 20-30 minutes of driving.

 

[jojabo]

I took delivery last night and am on 2024.38.100. No FSD or AP. Hopefully updates soon. My other 2 Teslas came with it on delivery. Also hilarious the 30 day free trial starts now.

 

[tenrten]

So has anyone with a non-foundation model gotten the FSD push yet?

 

[jenniiiiii]

I took delivery last night and am on 2024.38.100. No FSD or AP. Hopefully updates soon. My other 2 Teslas came with it on delivery. Also hilarious the 30 day free trial starts now.

Got mine today. Trial also started today.

 

[SmittS]

Got mine today. Trial also started today.

Are you sure you received the update or did you post the wrong screenshot? Screenshot indicates you’re still waiting on the update. My Saturday delivery on 32.100.1 looks like this, still no update almost 1 week later.

Sponsored